Open Files Using A Userform
Jan 10, 2009What I am trying to do is set up a few command buttons on my userform that will allow the user to open a specific folder, browse, and then open the file of their choice.
Is this possible?
ADVERTISEMENT
Open Files In Folder- Wait 30 Seconds Then Close The Files
Jul 5, 2007I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
Files Saved To Program Files Folder, Open As Read Only
Feb 8, 2009I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
Open Multiple Files From Array Of Filenames If Not Already Open VBA
Sep 15, 2014I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB:
Sub OpenWorkbooks()
Dim WorkbookOpen()
Dim WBnames() As String 'Array of WorkBooks to be Open
Dim WorkbookCnt As Integer
[Code] .....
Get Open File Name To Open Multiple Files
Jul 3, 2007I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
Want To Be Able To Open Csv Files And Save As Xls Files
Apr 21, 2009I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
View 9 Replies View RelatedOpen 2nd Workbook From Userform Then Close 2nd Userform?
Jul 4, 2012What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
Open CSV Files With VBA
Mar 7, 2012When I open some csv files with this code : "Workbooks.Open myDir & "" & strFilename" it will open all messy.
View 1 Replies View RelatedCan't Open Files
Aug 2, 2006I quite often bring spreadsheets home to work on, but in the last few days it seems that any sheet with a macro produces an error message when I try to open it on my home pc.
(Excel has encountered a problem and needs to close) The files are created with excel 2003 and my home version is 2002. Previously this has not been a problem. I can still load versions of the same spreadsheet from a week ago, but not any recent sheets containing macros. Macro security is set to medium - always was.
Is there a setting somewhere that could have inadvertantly been changed that is causing this problem?
Open Bmp Files
Aug 10, 2008I was trying to read BMP file. But when ever there are NULL char in File Left,Right doesn't work. Does any one have any alternative for this. For Eg. here are first 10 bytes of a BMP file. 42 4D 4E 01 00 00 00 00 00 00 3E
Open [C2].Value For Input As #BMP_Src 'Read BMP As Input File
While EOF(BMP_Src) = 0
Line Input #BMP_Src, sTemp
While Len(sTemp)
ActiveSheet. Cells(iRow, iCol).Value = Left(sTemp, 1) 'Update readed Char
x = Left(sTemp, 1) 'Temp Var to see Char
sTemp = Right(sTemp, Len(sTemp) - 1) 'Remove Updatd Char
iCol = iCol + 1 'Update Col Count
If iCol > 10 Then 'Init Col Count
iCol = 1 '
iRow = iRow + 1 'Inc Row Count
End If
Wend
Wend
In this code after reading 4th Byte Code jump to 10th Byte. because Left, Right consider NULL as endof string. I asked this Question to know if there is any alternative way to read NULL char in VBA.
Why Does Excel Open Some Files As Csv
Dec 16, 2008I receive excel reports every day. But the last couple of days when downloading the reports I get them as csv. Also older reports I have saved on the hard disk open as csv.
Well, the ones I have saved have are now csv files and I haven't done anything (knowingly) to change them to csv.
Open Different Files With 1 Button
Nov 3, 2008I would like to create a button that will open a file in a location based on the date of the file. So if I click the button the file with the latest date is activated as read only. The file name is always the same except, the date is added to the file name each day.
View 14 Replies View RelatedOpen Different Files In The Same Workbook
Jan 7, 2009I am trying to create a template application where the user will use buttons to show the open file dialog box and select two files, and I want these files to open in the same workbook, in different sheets.
View 6 Replies View RelatedOpen All Files From A Folder
Aug 4, 2009I have created a Spreadsheet that does all of the calculations, analysis, graphs, etc. that i need; however every time I wish to use this spreadsheet I need to first open up a spreadsheet with data, copy it and then paste it into the original spreadsheet. While this is not horrible, it is quite tedious to do several thousand times.
Thus, I was wondering if it were possible to create a Macro that would open up all files in a specific folder, then select each one and paste the relevant data into my original spreadsheet. I know this possible for specific files; for example, I have created a Macro that will select files data.xls, dats1.xls, data2.xls, and paste these into the spreadsheet, but I was wondering if there was a way to generalize this so that it will simply open every file regardless of the name or how many files there are in the specific folder.
Open All Files And Save As In New Dir
Jul 9, 2012I have files stored at C:KLQ1. Some with .xls and some with .xlsm. Now I want to same all the files under C:KLQ2 with .xlsm extension. Then replace all the 2005 with 2006 in the saved-as file. Then close all the files in Q1 without saving and all the files in Q2 with saving. The following code is modified from somewhere but does not work.
Code:
Sub OpenCloseFile()
Dim i As Integer
Dim wbResults As Workbook
Dim ws As Worksheet
[Code]....
VBA - Open All XLS Files In Folder
Mar 11, 2014I have a prompt for the user to select a folder and then assign the path a variable. I would then like the VBA macro to open all files within that folder (no sub folders) that end in .xls.
View 3 Replies View RelatedOpen Files In A Folder
Nov 28, 2006I want open excel files in a folder with ascending order how can I do this,
Eg:- In C:6-11-28 folder there are files as F1.xls, F2.xls , F3.xls......
I want to open above files and get some data from each excel file
Folder name change as System date
Open All Files With A Macro
Apr 30, 2007If i have a folder with multiple csv files in it, all with different names can i get a macro to open all these files.
I know that i can if they are always the same name each time i run the macro but what i would like to do is to change the name of the csv files daily.
The reason is because i could have upto 50 different files a day.
So basically i'd like to click a button and open all the contents of the folder regardless of the name of the files inside.
Open Notepad Files In VBA
May 16, 2007What is the code to oepn notepad files?
Get error if uses code below:
Dim noteApp As Object
Set noteApp = CreateObject("notepad.Application")
Files Open Automatically
Jul 25, 2007The background is that I only use macros for a few limited files to save me some time spent on monotonous clicking. Well, yesterday I made three little macros that clear the info in three weekly files and save each with a new date (in preparation for me adding the new info). When I left yesterday, the macros worked as intended. I come in to work this morning, and each of those files now open automatically whenever I open any other file in Excel (just for the first one, nothing happens if I open a second).
View 3 Replies View RelatedHow Do I Open Several Files With The Same Name String
Nov 28, 2007I am writing to see if this can be done. I have a master file that I want to open up to 80 files in a directory. For example, if I select Janauary as the Master file month to process for it to open up all files lastname_firstname_Jan01_15 and lastname_firstname_Jan16_Jan31.
I want it to populate the Master file based on criteria set in column A for that file.
Also, two of the fields need to be a sum from all of the files.
Open Multiple PRN Files
May 8, 2007i have this code below that opens a prn file. What i want it to do now is to open the next prn file within the folder. I want it to continue until it opens all of them in the folder.
Sub Macro1()
Dir ("D:FTP dataOrder Assessment*.prn")
Workbooks.OpenText Filename:="D:FTP dataOrder Assessment*.prn", _
Origin:=xlWindows, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= _
Array(Array(0, 1), Array(8, 1), Array(12, 1), Array(31, 1), Array(44, 1), Array(59, 1), _ Array(72, 1), Array(84, 1), Array(93, 1), Array(103, 1), Array(114, 1), Array(123, 1))
End Sub
Open PDF Files Via Macro
Jul 28, 2007How can I code a Macro in Excel to search in a preset directory and pull out, aka open/run a certain Adobe Acrobat .pdf file automatically? Is this even possible to code in Excel Macro or is it out of its scope of what Excel VB code can do?
Right now I have a very repetitive task where depending on the value of a certain field in Excel I have to search for the right/corresponding .pdf file and open it up do work in the .pdf as well as the Excel worksheet... I have to do like hundreds of this. So is there a quick way to code in Excel that a certain value will open a certain file named .pdf acrobat file? Can other programs/files be called upon and ran/started/opened from within Excel Macro?
Open Multiple Files
Oct 2, 2007i have a master file which needs to be updated by several other sourcefiles. I did a macro running from the master file which opens all of the sourcefiles one by one, copies the relevant info from the sourcefile to the masterfile, and closes the sourcefile, then moves to the other one. i know this is probably not the case, but the code below seems to behave randomly: sometimes it works, sometimes it bugs by saying file not found runtime error 1004:
Dim masterfile As String
masterfile = "Master.xls"
Dim sourcefile As String
CurrentWeek = InputBox("Enter current week number")
CountWk = 35
sourcefile = "Source" & CountWk
Workbooks.Open (sourcefile)
....
The last statement causes the error. Both master.xls and source35.xls are in the same folder.
Open CSV Files By Date
Oct 12, 2007I have a folder with several downloaded payroll files. I want to write a macro in my "excel payroll converter" file which will selects and opens the last file downloaded. (So I can copy and paste it into my payroll converter.)
Open Txt Files Delimited, Space
Sep 6, 2008On a daily basis I open about 35 text files in Excel at one time, and then must responde to 35 dialog boxes:
"This file is not in a recognizable format" - I click OK
"Delimited or Fixed Width (default)" - I change to Delimited
"Delimiters listed with Tab as default" - I change to Space
I go through that 35 times. I don't save these files that I have opened, but once they are all open I paste each one in a separate worksheet in one workbook.
Can I at least change the defaults on these text boxes to Delimited, Space? That way I would just need to click on OK, then Finish for each file.
I am using Excel 2000.
Open .xls Files With 2007 As Default
Sep 28, 2009I have both 2003 and 2007 excel installed. When I click to open a .xls file it opens it in Excel 2003. How can I make .xls files open in Excel 2007?
View 11 Replies View RelatedFind And Replace Keeps Trying To Open Files?
Dec 6, 2012I'm copy and pasting many formulas from different worksheets. After pasting, I'm trying to go into each of the cell references and update it to the new worksheet. For example, let's say the cell has a reference to another cell of: ='Worksheet 1'!xx:xx I want change about 50 cells like that at once to ='Worksheet 2'!xx:xx However, every time I pick the Replace feature, either one at a time, or all at once, it opens the Open file dialog box. I've confirmed that it definitely "Finds" everything correctly....it just happens every time on the "Replace".
View 3 Replies View RelatedExcel 2010 :: Can't Open WK3 Files
Dec 19, 2012We use wk3 files a lot at work, but since switching to Excel 2010 I can't seem to read them anymore. Used to work fine with 2003.
View 1 Replies View RelatedCopying From Same Cells In All Open Files
Apr 16, 2014I have 20 files with the same exact format. I want to copy two cells from each file (G26, G52) into another worksheet. Unfortunately, all of the files have the same name, so I guess I have to rename them all manually (1,2,3,etc.). Any code that will copy the results and paste them into A2,A3 and then go down the column based on the "name" (1,2,3, etc) of the open files?
View 4 Replies View Related