I receive excel reports every day. But the last couple of days when downloading the reports I get them as csv. Also older reports I have saved on the hard disk open as csv.
Well, the ones I have saved have are now csv files and I haven't done anything (knowingly) to change them to csv.
I have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles()
Dim MyFolder As String
Dim myfile As String
[Code].....
We use wk3 files a lot at work, but since switching to Excel 2010 I can't seem to read them anymore. Used to work fine with 2003.
View 1 Replies View RelatedI want to open files from an excel list.
Sub Openfile()
Dim wkbOne as Workbook
Set wkbOne = Application.Workbooks.Open(Filename:=Worksheets("Sheet1").Range("A1") & Worksheets("Sheet1").Range("B1")
'where "A1" is the path where the file located and "B1" is the file name.'
End Sub
When I run this it will work, but if I change to below it won't open all file in range, what's wrong with this?
Sub Openfile()
Dim wkbOne as Workbook
Set wkbOne = Application.Workbooks.Open(Filename:=Worksheets("Sheet1").Range("A1:A10") & Worksheets("Sheet1").Range("B1:B10")
End Sub
I am using xp pro, excel 2010 and the ftp server has linux installed. To open files from server I press open button in excel, then choose ftp location from drop down menu. FTP logon box asks password with the option of default user selected. I provide password and go on.
Some days ago something happened, I don't know what but as a result of it when I opened the FTP logon box, the anonymous option was selected by default. So I selected user option, gave id password and hit ok. It did not connect. Then I removed that ftp location from excel ftp locations. Whenever I tried to add an ftp location, excel restarted stating error message " *** encountered a problem *** ". So I reached a site after some googling and was directed to add the whole ftp file location path in the "File name" box of the open dialog box. It worked and the ftp location was automatically added in ftp locations. [ any ftp setting in excel is automatically transferred to ms word as well]
PROBLEM > Now I have a different problem. I can access ftp folders and subfolders but when I select a file and click open, downloading bar at the bottom of the excel does not start and after a long wait an error message pops up " the internet address ' ftp://192.168.****/folder/subfolder/filename.xls" is not valid. [I can open ftp files using filezilla etc]
I run two monitors and am able to open different files on each monitor which is very handy.
This doesn't seem to work with Excel. If I have two different Excel files open I can only view one at a time. I can move across to the other monitor, but then can only view one at a time on that monitor - very frustrating.
When I was using Excel 2010 on my last job I was shown a clunky, round-about way of being able to open two Excel files, one on each monitor. (By opening one file, opening a new Excel document from there, and then opening the other Excel file from the new document, minimizing that file and dragging it to the other screen).
Now I am using Excel 2007 and am not able to view two different Excel files, one on each screen. how I can do this in Excel 2007?
I have a folder which has a set of files (Files may be anything like excel,pdf,word..etc).My rrequirement is: When i run the macro the first file to last file should open and wait for 5 sec and then close..I mean first time the first file should open and wait for 5 sec and close..Next 2 nd files shoul open and close after 5 sec..next third files should open and close after 5 sec...Like wise till last file..Is this possible to achive through macro code..
View 7 Replies View RelatedI would really like excel to open files in a new instance of excel by default. Currently the only way I can do this is by starting excel and then File->Open. While this is only a little bit of extra effort, I've recently gotten in the habit of opening and closing 100s csv files daily and the wasted time really adds up. I've read several threads here, but mostly found people trying to accomplish the opposite of what I am.
View 4 Replies View RelatedI have been opening files from another application which opens the files in memory as .XLS. I have not saved these to my PC. Is there VBA to merge all open .XLS files into another Workbook - preferably .XLSX.
View 1 Replies View RelatedI'm trying to determine how many different excel files are open, but my VB program runs outside of excel (in a program called Pulse).
Here's the code so far:
set ExcelApp=CreateObject("Excel.Application")
ExcelApp.Visible=True
For Each Workbook in ExcelApp.Workbooks
MsgBox(Workbook.Name)
Next
Msgbox(ExcelApp.Workbooks.Count)
The only message box I get is the last line of code, and it says "0" even though I have multiple excel workbooks open.
I'm using 2003 (I know!) version & I can't open excel files directly by clicking on them. I get an "error in sending command" message. I can circumvent problem by opening Excel & then opening the relevant file, but this sometimes causes me problems.
View 4 Replies View RelatedIs it possible to protect an excel file such that it will open up only on designated computers (identified by the computer name or some unique hardware identification like MAC address etc)?I was wondering if the VB editor can be used to do the same.
Let me put my requirement in detail:
I have an excel file "123" created in one computer (named=A). On this computer this file can be opened by anyone.I write a code such a way that, this particular file when copied on to other computers say (B,C & D) would open up as usual. But on computer E or any other computer, it should not open.
I cannot use password protect feature on the file as "n" number of users will be accessing this file on those designated computers. I was finding few of the clients copying the files on their personal drives or email without proper consent.If its possible, I would like to employ the same on few of my word (.doc) files as well.
Is there a way to convert all files in folder, in this case, xml in excel format to xls without open them?
I recorded the macro below, but this needs to "Open" and "SaveAs" the current file in folder and there are a few thousands of xml files in folder.
I was wondering if through some ADO or VBA code this can be done without open the files in order to save resources and get the work done faster?
Code:
Sub Convert_XML_to_XLS()
Workbooks.Open Filename:="C:MyPathInputFile.xml"
ActiveWorkbook.SaveAs Filename:="C:MyPathInputFile.xlsx" _
, FileFormat:=xlOpenXMLWorkbook, CreateBackup:=False '
End Sub
I am looking for an IPad App which can open Macro-Enabled Microsoft Excel Files.
View 1 Replies View RelatedI have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
View 1 Replies View RelatedThere is a folder with all excel files with the same structure. I need a macro, who opens one file by one in a folder, change the layout, and save it too same place with same name. Changing the layout will I do with macro record.
Sub AllFiles()
Dim MyFolder As String 'Path containing the files for looping
Dim MyFile As String 'Filename obtained by Dir function
Dim MyBook As Workbook
MyFolder = "D:LABODIESTSOST_DIEST" 'Assign directory to MyFolder variable
[Code] ......
Is there a way to open a text file from Excel 2010 and specify that I want it in .xls format?
I am working in compatibility mode, and expected that when I opened a text file from code within an xls file, the text file would have 65,536 rows, but it has 1,048,576. This causes a problem when we try to copy the sheet with the data from the text file, and insert the sheet into our xls workbook. See code below. The error is: Run-time error '1004': Excel cannot insert the sheets into the destination workbook, because it contains fewer rows and columns than the source workbook..
I know I can get the data other ways (such as copying and pasting only the cells containing data) but I was hoping to make minimal changes to the code below as I will have to make it across several templates. Specifically, I was hoping that there was a qualifier I could add to the Workbooks.OpenText statement after "Tab:=True" - Perhaps something about opening the text file in File Format 56. However I have not been able to find out how to do that.
Code:
.....FileToOpen = Application.GetOpenFilename("All Files (*.*),*.*,GeoTAC Files (*.ctf),*.ctf, _
Text Files (*.txt),*.txt,Excel Files (*.xls),*.xls", 1, , , False)
Workbooks.OpenText Filename:=FileToOpen, _
[Code].....
I have my code here:
VB:
Sub openfiles()Dim Path As String
Dim ExcelFile As String
' Path = GetFolder("C:UsersKinteshDesktop")
Path = "C:UsersKinteshDesktopVBA programmingMaps"
ExcelFile = Dir(Path & "*.xls")
[Code] ....
NextCode:
GetFolder = sitem
Set fldr = Nothing
End Function
My problem is that the code all actually works (including the function and when I use the commented part), but pointing to this one specific directory (the one I'm using right now), literally nothing happens.
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB:
Sub OpenWorkbooks()
Dim WorkbookOpen()
Dim WBnames() As String 'Array of WorkBooks to be Open
Dim WorkbookCnt As Integer
[Code] .....
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
View 9 Replies View RelatedWhen I open some csv files with this code : "Workbooks.Open myDir & "" & strFilename" it will open all messy.
View 1 Replies View RelatedI quite often bring spreadsheets home to work on, but in the last few days it seems that any sheet with a macro produces an error message when I try to open it on my home pc.
(Excel has encountered a problem and needs to close) The files are created with excel 2003 and my home version is 2002. Previously this has not been a problem. I can still load versions of the same spreadsheet from a week ago, but not any recent sheets containing macros. Macro security is set to medium - always was.
Is there a setting somewhere that could have inadvertantly been changed that is causing this problem?
I was trying to read BMP file. But when ever there are NULL char in File Left,Right doesn't work. Does any one have any alternative for this. For Eg. here are first 10 bytes of a BMP file. 42 4D 4E 01 00 00 00 00 00 00 3E
Open [C2].Value For Input As #BMP_Src 'Read BMP As Input File
While EOF(BMP_Src) = 0
Line Input #BMP_Src, sTemp
While Len(sTemp)
ActiveSheet. Cells(iRow, iCol).Value = Left(sTemp, 1) 'Update readed Char
x = Left(sTemp, 1) 'Temp Var to see Char
sTemp = Right(sTemp, Len(sTemp) - 1) 'Remove Updatd Char
iCol = iCol + 1 'Update Col Count
If iCol > 10 Then 'Init Col Count
iCol = 1 '
iRow = iRow + 1 'Inc Row Count
End If
Wend
Wend
In this code after reading 4th Byte Code jump to 10th Byte. because Left, Right consider NULL as endof string. I asked this Question to know if there is any alternative way to read NULL char in VBA.
I would like to create a button that will open a file in a location based on the date of the file. So if I click the button the file with the latest date is activated as read only. The file name is always the same except, the date is added to the file name each day.
View 14 Replies View RelatedI am trying to create a template application where the user will use buttons to show the open file dialog box and select two files, and I want these files to open in the same workbook, in different sheets.
View 6 Replies View RelatedWhat I am trying to do is set up a few command buttons on my userform that will allow the user to open a specific folder, browse, and then open the file of their choice.
Is this possible?
I have created a Spreadsheet that does all of the calculations, analysis, graphs, etc. that i need; however every time I wish to use this spreadsheet I need to first open up a spreadsheet with data, copy it and then paste it into the original spreadsheet. While this is not horrible, it is quite tedious to do several thousand times.
Thus, I was wondering if it were possible to create a Macro that would open up all files in a specific folder, then select each one and paste the relevant data into my original spreadsheet. I know this possible for specific files; for example, I have created a Macro that will select files data.xls, dats1.xls, data2.xls, and paste these into the spreadsheet, but I was wondering if there was a way to generalize this so that it will simply open every file regardless of the name or how many files there are in the specific folder.