Passing Form Label As Parameter

Apr 22, 2014

Within a module I have about 10 Label_Click events. Since they essentially do the same thing I want to create a another procedure that these 10 label_click events will call.

This is what the click event on Label2 looks like:

Code:
Private Sub Label2_Click()
LabelClick (frm.Label2)
End Sub

As you can tell I am trying to call LabelClick routine, which looks like this:

Code:
Private Sub LabelClick(ByRef lbl As Object)
...{my code here}
End Sub

But when I run it, it throws an error at event level saying "Type mismatch".

I also tried "Label" instead of "Object" in the signature, but I get the same error.

View 2 Replies


ADVERTISEMENT

Passing Active Form As A Parameter

Dec 5, 2012

I got a couple of userform and want to make sure all form are closed before opening the next one.

I'm trying to pass the active user form as a parameter to a subroutine that will ensure the form is close before opening the main menu, but I'm doing something wrong.

Code:

Private Sub CmdMainMenu_Click()
Call gotoMainMenu(FrmInventoryMain)
End Sub

Code:

Sub gotoMainMenu(acsheet As String)
Unload acsheet
Unload FrmMainMenu
FrmMainMenu.Show
End Sub

View 1 Replies View Related

Passing Column As Parameter

Mar 20, 2009

How can I pass a column as a parameter when I execute the sub? ex:

View 2 Replies View Related

Passing Subroutine As A Parameter

Mar 26, 2009

I want to pass the name of the routine as a parameter.

View 6 Replies View Related

Passing Array To OFFSET - Array Height Parameter

Aug 5, 2014

I want to pass an array to Offset in the "Height" parameter, without having to type the array.

{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}

I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.

How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??

View 8 Replies View Related

Passing Info From A Form Combobox

Oct 28, 2008

What am I doing wrong here? I have a custom form with a combobox on it, and I'm trying to set a variable in my workbook to read that info, but my value always comes up blank...here is my code...

View 3 Replies View Related

Passing Array From Module To Form

Mar 7, 2007

I have been struggling with a problem passing a small array to be used in a form and I hope that somebody can help me. I cannot get the array into the form.

In the main module code I have an array containing information on a book reference:

Private Function PresentForm1(ByRef iID() As String, sBookRef() As String) As Boolean
Dim iCounter As Integer
For iCounter = LBound(iID) To UBound(iID)
Form1.ListBox1.AddItem iID(iCounter)
Next
Form1.ListBox1.Selected(0) = True

For iCounter = 0 To 2
MsgBox sBookRef(iCounter) ' This bit works fine
Next iCounter

Form1.Show
End Function ...

View 7 Replies View Related

Setting Parameter For One Column And If True Then Check Line Above And Below For Another Parameter

Jul 31, 2013

I though I could do this with a nested IF statement but it is too cunfusing for me. What I am trying to accomplish is this:

Experiment
Is Steward
EU ID
Location
Data Quality
GE
Entry Order

[Code] ........

I want to have a screen pop-up asking me what my limit < would be for column "ESTCNT" so if I put in 25 or any other number that it would highlight all the rows that are less than 25, then look at the row above and below and if it matches the same number (that is in the cell "Range" of the highlighted column) in column "Range" then copy that row to a new sheet. Meaning all tha rows that match the "Range" would be in the same new sheet.

The rows might be different lengths and that there will not always be a number in cell "ESTCNT". Column headers will always be the same but might not be in the same column each time. And if it is not to hard once it is completed to find column "SPPLOT" in the new sheet created and asking what I want to autofil the column with.

View 2 Replies View Related

Excel 2007 :: Form Command Button Label Length

Aug 2, 2013

We just upgraded to Excel 2007 from Excel 2000 and have run into a challenge relating to labeling a form command button. It appears that the length of text for a command button label has been shortened to 31 characters when setting the name using VBA. No such limitation shows up when I manually create such a button.

Following is the code that used to work to create the button and label in VBA (Excel 2000):

VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"

[Code] .....

If I change the string I want to use for the label to 32 characters, or less, this code works (Excel 2007).

VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"

[Code] ....

I have to admit that this is the last item that I thought would break!

View 4 Replies View Related

Include Mm "squared" In Form Label?

Jan 16, 2010

I would like to include ASCII 178 character into a label in a user form. mm2 where the 2 is superscript. I have been using ALT and numbers, but I don't know the correct number.

View 2 Replies View Related

Pass Userform1 Label Content To Label On Userform2

Jun 13, 2013

I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.

VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm

View 3 Replies View Related

Label Making (take The Information And Incorporate It Into A Label Format)

Jan 14, 2009

I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer

Customer: ABCD
Customer PO: 12345

Part Number Quantity
AB 1
** 15
EF 22
GH 14

and I need it to output:

CUST: ABCD PART: AB
PO: 12345 QTY: 1

CUST: ABCD PART: **
PO: 12345 QTY: 15

CUST: ABCD PART: EF
PO: 12345 QTY: 22

CUST: ABCD PART: GH
PO: 12345 QTY: 14

View 4 Replies View Related

Get VBA To Recognize Label In Userform As Value And Have Another Label Calculate From It

Aug 17, 2012

I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.

This is what I currently have. This returns $0.00 in the label value but does not calculate...

Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""

[Code]....

The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..

View 4 Replies View Related

Label Caption Does Not Appear Until Label Is Clicked?

May 13, 2014

I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?

Also example of my code is:

Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub

View 3 Replies View Related

Label Scatterplot Chart: Plot Two Values Against Each Other Using A Scatterplot, And Label Each Service

Feb 13, 2008

I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.

Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.

Problems include:

- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........

View 4 Replies View Related

Parameter Query

Sep 16, 2007

Here it goes.

My spreadsheet is populated by data coming from MS Query, i'm entering a parameter value to display the desired data in my spreadsheet. My problem is, i have to close and open the file to have the parameter prompt so in that case i can enter the parameter value.

Is there anyway to call the parameter prompt so i will not open and close the file, its really time consuming...

If possible, i just want a command button that calls the parameter prompt.

View 9 Replies View Related

Using Combobox As Parameter

Sep 15, 2009

I have a function which has to contain the name of a combo and use it with some given parameters, here's my example: ...

View 8 Replies View Related

How To Set Parameter To Macro

May 26, 2012

add parameter to this macro and at the end the process to index the highest result at the end, is that possible?

Here is the macro;

Code:
Sub Macro()
Range(Selection, Selection.End(xlDown)).Select
Calculate
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Range

[Code]..

to run 5000 times

View 8 Replies View Related

Name Of Day/Month Parameter

Mar 2, 2009

Looking for a formula that gives the 1st - 5th day of a month, using the day name, e.g. "First Monday of March 2009" returns "2". Even better is if it could accomodate previous and following months, e.g. "First Monday of Next Month" returns "6". 3

View 9 Replies View Related

MS Query Parameter With Like %'s

Mar 20, 2009

I can run my query from within MSQuery something like

like %RESISTOR%

and it works fine.

However I cannot use %RESISTOR% on the excel sheet as a parameter.

is it possible to update a query using a parameter in this way? Maybe getting VBA to actually update the query manully.

View 9 Replies View Related

Parameter Queries In Vba

Mar 30, 2007

I want know how to pass a parameter through a cell for date in the following url

http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=10

View 9 Replies View Related

Sumif With Variable Parameter?

Mar 6, 2014

I have a a table at the top of my worksheet which is a breakdown of performance. (Table 1), i would like Table 2 to roll up performance using a =SUMIFS calculation. However number of rows in table 1 may vary.

View 2 Replies View Related

Match Function Value Parameter

Jan 8, 2009

is there anyones know what's the meaning of 1 in this formula
MATCH(1,('Data Issues'!$A2=Sheet1!$A$2:$A$68)*('Data Issues'!B2=Sheet1!$B$2:$B$68),0)

View 2 Replies View Related

Prompting For Parameter Value Using Macro?

Mar 12, 2014

Last time i got macro from this forum how to import files automatically. I am importing the data from the specific folder.In code itself we are hardcoding that file names.But in that folder i have lot of files is there any option to pass any parameter value.That means each time it will asks for filename(Prompt).Once you give file name it will automatically load the data.

[Code] .....

View 6 Replies View Related

Input Parameter To Set A Limit

Apr 26, 2008

How do I adjust the VB code below so when the user clicks the command button they are prompted to set a limit.
i.e the code only runs til it hits the limit and stop (instead of running until it there are no more x in the columns)

Row 2, Col 9 stores the column numbers (listed as 1, 2,.....100) so thought this could be used in some way.

1. how do i set up the code so a user can enter a parameter value e.g 50 (which is the limit but also includes the values in column number "50")

2. how do i adjust the code so it take the parameter value and stop when it reaches column number "51"...

View 9 Replies View Related

Send Parameter Into Macro

Oct 31, 2008

I have a macro in which I will trigger it to run automatically, under windows scheduler. Eg:

"D:DataMacro.xls".

I am expecting to pass parameter in such way, which I did for my other exe application.

"D:DataMacro.xls" parameter_1.

I want the macro to read the parameter_1 in such way.

View 9 Replies View Related

Incrementing An Alphabetic Parameter

Mar 16, 2009

I am running a macro where I pass it starting column and it processes the next 10 columns. How can I pass it "J" and have it increment K,L,M,N,O,P,...?

View 3 Replies View Related

Get Information About The .NumberFormat Parameter

Jan 18, 2010

explain or provide a link to info about the .NumberFormat parameter?

I am using:

View 4 Replies View Related

UDF To Report Invalid Parameter?

May 6, 2012

What is the best way for my UDF to return an error to the calling worksheet if it detects an invalid parameter?

In the past, I have usually set a breakpoint so I could check the the values and the logic. Other times, I return an invalid result, like 0 or -1.

I am working on a UDF now that is called hundreds of times. The workbook is a work in progress so I am constantly making changes to the UDF and the calling cells. Periodically, I screw up and do something that causes every call to get an error (like divide by zero).

View 3 Replies View Related

Macro Sub Pass Parameter

Aug 21, 2008

I've written a function to delete the charts on a worksheet: ....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved