Paste Special In Summary Sheet
Jun 17, 2009
I have five sheets in a workbook, they are ID, Batch1, Batch2, Batch2 and Summary. Batch1, Batch2 and Batch3 have variable rows of data manipulated based on the data in the ID sheet (using formula, refering sheet ID) and number of rows in Batch1, Batch2 and Batch3 are varied.
On the Summary sheet I want to copy the rows from Batch1, Batch2, Batch3. From some forum, I have the code as below:
Sub MakeSummary()
Sheets("Summary").Select
'Clear the existing values (if any)
Range("$A$2:$D$600").Value = ""
Original = ActiveSheet.Name
Application.ScreenUpdating = False
Application.DisplayAlerts = False
The code is working magic. only problem is, it is copying the formula to the summary sheet from Batch2 and Batch3 sheet (Batch1 is ok, as it is the first row get copied)and therefore the reference to formula is refering to a blank cells.
I believe, it will solve the issue if I could paste the Values (Paste Special -> Values) into the Summary sheet.
View 9 Replies
ADVERTISEMENT
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Aug 4, 2009
This is a macro i have been using to update update information from one sheet to the next empty row in another sheet within the same workbook.
Sheet2.Unprotect Password:="Climber7c+"
With Sheets("FeedbackForm").Range("B7:N8")
.Copy Destination:=Sheets("Feedback & Performance").Range("A" & Rows.Count).End(xlUp).Offset(1)
.ClearContents
Sheet2.Protect Password:="Climber7c+"
The problem is i don't want to copy the formating, cell protection properties and comments, just the values with in the cells.
View 9 Replies
View Related
Jun 23, 2006
i would like to copy a sheet to another sheet, rename, copy and paste special values. but after the sheet is copied to another, the macro stops working...?
Sheets("Proposal").Copy After:=Sheets("Proposal")
'rename...
ActiveSheet. Name = "ProposalEmail"
ActiveSheet.Copy
ActiveSheet.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks _
:=False, Transpose:=False
View 2 Replies
View Related
May 8, 2013
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
View 6 Replies
View Related
May 8, 2014
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx
View 9 Replies
View Related
Sep 21, 2013
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
Period Start
Calls
AHT
Sch
Net
SL Calc
12:00 AM
15
299
5.5
1.24
93.33
[Code] .....
View 4 Replies
View Related
Jun 30, 2014
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code:
Sub SummaryCalculations()
Dim lr As Long
Dim i As Long
Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
For Each ws In SheetArray
[Code] ...........
View 8 Replies
View Related
Mar 17, 2007
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
View 9 Replies
View Related
Feb 23, 2010
I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
View 9 Replies
View Related
Mar 20, 2007
I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.
View 5 Replies
View Related
Mar 26, 2014
copy content from particular cells in the current sheet to the next available row in another sheet. I need to Paste the Values as the cells I am copying are equations. It was working great until I tried using it again today. For some reason I get the following error:
Run-time error '1004':
Unable to get the Select property of the Worksheet class
Here is my code:
Code:
Sub CopyCampaignMetrics()
Range("A2:E2").Select
Selection.Copy
Sheets("Sheet2").Select("A" & Rows.Count).End(xlUp).Offset (1)
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
View 9 Replies
View Related
Dec 31, 2006
How would the code be changed below to be Paste Special Value?
The numbers copied are changing every few seconds and I want a snapshot of it.
im TheRow As Integer
Sheets("Loader").Range("C5:AC5").Copy
TheRow = Sheet2.Range("A100").End(xlUp).Offset(1).Row
If TheRow < 6 Then TheRow = 6
Sheet2.Cells(TheRow, 3).PasteSpecial
If TheRow = 6 Then Range("B6").Value = 0 Else Cells(TheRow, 2) = Cells(TheRow - 1, 2) + 1 / 24
Cells(TheRow, 1).Value = Date
ActiveWorkbook.Save
LastSoon = Now + 1 / 24 '1 hr from last time
Application.OnTime LastSoon, "Capture" 'set up for next hour
View 9 Replies
View Related
Jul 21, 2007
I have the following in my Workbook
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
'If you have any worksheet to exclude
If Sh.Name = "Sheet2" Then Exit Sub
With Target
If Len(.Value) Len(Trim(.Value)) Then
MsgBox "You just entered a leading space character in" & vbCrLf & _
" cell " & .Address(0, 0) & "." & vbCrLf & vbCrLf & _
"If you intend to delete the value in that or any cell, " & vbCrLf & _
"please press the Delete button on your keyboard.", 16, " No leading spaces allowed !!"
Application.EnableEvents = False
.Value = Trim(.Value)
Application.EnableEvents = True
End If
End With
End Sub
When I tried to Copy>Paste Special > Formats or Values of more than One row this line highlights
If Len(.Value) Len(Trim(.Value)) Then
That is, if I select C3:Q3, Copy, then select C10:C15 and try to do a Paste Special that is when it gives me an error 13: Type mismatch.
If I just select C10 and do the Paste Special, it's just fine.
View 9 Replies
View Related
May 4, 2007
I am trying to write a VBA code which will add any figure (say X) to the visible cells in the selected range. I am mentioning the visible part becuase my data might be filtered and thus. So far I have been able to figure out the following code(by recording a macro and then going behind the scenses to see the code):
Sub Add_X()
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlAdd, SkipBlanks:= _
False, Transpose:=False[/color]
End Sub
The problem is that how can (if possible) I can pass a parameter to the above code (which will be X; as explained above). There might be many possible solutions??? However one that comes to mind is that when I selected a range of cells and then run my code, a dialog box should pop-up and ask for a # and then then take that # to add it to the visible cells of the selected range.
View 2 Replies
View Related
Jan 26, 2008
Is there a way to only allow paste special values or formulas within a cell? People are coping and pasting and screwing up the formating
View 2 Replies
View Related
Jun 28, 2009
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies
View Related
Sep 14, 2008
I have some simple Macro code that works fine for the COPY side of the action...
View 14 Replies
View Related
Nov 14, 2008
I have a macro that copies the main report sheet in my workbook. The point of the macro is to get a copy of the report data without allowing anyone to see the formulas/data behind it - when it pastes, it pastes only the values in the tables and then copies the charts, deletes the live ones, and pastes only the images back on the sheet. The macro works on my computer and my partner's computer, but not on anyone else's. It stops at this point:
View 5 Replies
View Related
Jul 9, 2009
During the execution of some code I come to a point where the properties of a range of cells needs to be converted to numeric (is at that point text).
Normally I do that by adding a 1 in an cell nearby and use the copy/paste special method.
I was wondering if I can do that in a different way.
Is it possible to define a MultiplyFactor as 1, and use this in paste special part.
Something like: .....
View 9 Replies
View Related
Sep 16, 2009
I've got a sheet which has two column headings - Resources and Cost. I have another sheet which has the calculations for both of these. They are in cells H24 and D29 of the second sheet. I want to have a macro on the second sheet that if I click it, it will paste special these two figures (values only so no formulae), into the active cell on the first sheet. This is the code I've got so far but every time I run the macro it just pastes into the same two cells in the first sheet.
View 4 Replies
View Related
Nov 4, 2009
Working in one workbook, I am using sheet 1 as a master form and copying it to the back of the workbook and renaming it.
View 3 Replies
View Related
Jan 5, 2007
I have the following macro and it keeps coming up with syntax error.
Sub CopyIt()
Dim LasteRow As Long
Dim LastaRow As Long
LastaRow = Sheets("Sheet2").Cells(Rows.Count, 1).End(xlUp).Row
LasteRow = Sheets("Sheet2").Cells(Rows.Count, 5).End(xlUp).Row
Application.ScreenUpdating = False
Sheets("Sheet2").Activate
Sheets("Sheet2").Range(Cells(2, 1), Cells(LastaRow, 1)).Copy
Sheets("Sheet1").Range("A2").PasteSpecial Paste:=xlValues,
Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Sheets("Sheet2").Range(Cells(2, 5), Cells(LasteRow, 5)).Copy
Sheets("Sheet1").Range("B2").PasteSpecial Paste:=xlValues,
Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
Sheets("Sheet1").Activate
Application.ScreenUpdating = True
End Sub
It happens when it comes to the paste special bit on book 1.
View 9 Replies
View Related
Jul 7, 2008
In the new 2007 version , can a specific hot key be created to perform Past Special Values? This key assignment was available in 2003, but we can't find it in the new 2007.
View 9 Replies
View Related
Oct 21, 2008
I am trying to come up with some VBA to paste special value an entire workbook.
View 9 Replies
View Related
Jun 8, 2009
I just want to find out what formula could make a function "copy paste special value"?
View 9 Replies
View Related
May 4, 2006
I have the following code in a macro which works fine. Is there a way to shorten the code down to 1 line?
Sheet2.Select
Range("C2:F2,H2:J2,N2,P2,R2,T2,W2,Y2,AA2").Select
Range("AA2").Activate
Selection.Copy
Sheet9.Select
Range("B3:O3").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I would like to use the code in a Select Case Statement & the above code is too cumbersome.
View 2 Replies
View Related
Jul 7, 2006
Paste Special is no longer available in the Edit menu--it's grayed out. (I am using Excel 2003). I can't find any info on what disabled it or how to re-enable. It's probably something moronically obvious, but this moron needs a shove in the right direction.
View 6 Replies
View Related
Jan 31, 2007
Got a bit of an issue with using the paste special function. I am trying to record a macro that would copy a group of cells that are verticle, and then paste them onto a new row in a different sheet.
I have done this in the past by enabling the record macro function and inserting a new row going back to the sheet with the data selecting the data copying it, and then selecting pasting area using paste special and enabling the "Transpose" box.
Although today i found this didin't work in fact it (this is the best i can describe it) merged each cell with the cell below givng a type of square function as can be seen below.
After i click ok, this happens
As you can see the cells are now twice the size.
View 3 Replies
View Related
Mar 14, 2007
On my spreadsheet I want to move a column at the start of the day (as one column is todays values, the one previous is yesterdays). I have tried the following but it doesnt like it:-
Sub RQV()
Dim warn As Integer
warn = MsgBox("Do you wish to move RQV data to yesterday?", vbYesNoCancel)
Sheet1. Unprotect
Range("F2:F65536").Select
Selection.Cut
Range("E2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheet1.Protect
End Sub
It comes out with a run time error 1004? It needs to be a paste special as I just want the values put in. I have tried recording a macro to see how the vba code works, but it doesnt give me the option to paste special for some reason and I presume this is why the error occurs.
View 9 Replies
View Related
