i've managed to get a set of cells to show (with comments) what the last weeks data looked like. (so cell value = this week, comment contains last week)
What i now want to do is to use conditional formatting to highlight any major differences between the figures... so:
My comment i'm sure is stored as text in the format:
Previous value was
xxxxx
So the first thing i'd need to do is to to strip out the text at the start, and then perform the calculation.
I have a set of data with names in col A, Currency in col B, Amount in Col C. I want to convert all the amounts in NON-USD based on exchange rate I input daily into column D.
How do i search down the row for the next name that is denominated in GBP / YEN etc and keep converting until I dont find any more other currencies in it. I tried to improvise on the finding nth but couldnt get anything out of it. Have attached a spreadsheet.
I'm a fairly new user to using VBA and I'm currently running into a little snag. I'm trying tu create userform which will let me know if a person already exists in my sheet by looking up the last name in "A", then looking up his first name in "B", if such entry exists then display a message saying " Yes". If entry user has not been entered in the sheet then use a combox, to select the reason , then choose a date ( i have a working date picker ). Then entry should be entered in sheet (Name, Surname, Reason, date).
Whats working, I can use all of the above to enter all the info into the sheet, what I need to do is verify if user is alread in there, if not, then add it. The so on and so forth
I have the following code which previously was showing an error on the Do While line. It was suggested that I change the line too Range("B2").Text. However, the loop is not deleting the rows based on "#N/A". Can anyone offer any suggestions?
I have a very large grid of data, about 400Rx200C, which contains a lot of blank fields. All of this data is currently in values from 0-100 representing percentages, but not formatted as such. I need to make all of these values into Excel Percentages so naturally used Paste Special and Divide from a field with the value 100 in it and then simply format the cells as %.
However, this fills in all of the original empty cells with a 0.000% which I do not want, I need them to stay blank. And some of the cells that do have values also have 0.000% so I cannot just delete all of these values with a VBA script. I had been hoping the Skip Blanks option would do this, but it does not unfortunately.
I am trying to write a Macro that will do the following.
1. Using a new workbook 2. Open a file in a in a directory. Then 3. Run a vlookup using the opened file as the filename in the vlookup 4. Paste the results of the vlookup into the original file next to the file name. 5. Close the file and open the next one in the folder.
The folder contains about 2k files that it needs to loop through. I found a macro on this site created by Ravishankar and attempted to add to it. Not going so well.
I have two subroutines. One subroutine updates some figures on spreadsheet 1, and then calls a subroutine that updates some figures on spreadsheet 2. Spreadsheet 2 is supposed to save and close, and return to spreadsheet 1, but it only gets as far as opening spreadsheet 2 and updating the figures. These are the two subroutines:
Code: Sub UpdateLegalAndMeans() Dim wBook As Workbook Dim count As Integer ' counter for counting down backlog figures
I am creating a range of numbers from 1 to 2000 with increments of 0.5. Then I have to subtract certain range, for example, 100 to 350. So, the result should display, 1 to 95.5 and 350.5 to 2000.
All of the numbers between the 100100 Books, 100300 Videos belongs to that category. This repeats hundreds of rows down. I need the column to the left of this range to display which division it under. I parse this in excel so Books, Videos, Magazines will be in their own column. I am not exporting the CSV so have to manipulate it in excel. I need to have the column to the left combine the whole identifier so I can perform a VLOOKUP on it. It should look as follows:
100100.1234.ab 100100.1345.bf etc.
My approach was to get the column to the left of the range to display the correct division, then have another column combine by using (cell)&"."&(cell).
This is my first post so i may not have done everything correctly. I tried doing google searches to see if anyone else has done something similar but its a tricky thing to search for. I have found pages dealing with manipulating time but none seem to be what I want
I have an Excel sheet with data
A1=date b1=source C1-h1 all contain data (name, location, etc, etc) but I am not interested in those.
A1 (the date cell) is formatted like: m/d/yyyy" "h:mm:ss AM/PM
[Sample]
a2 = 8/1/2006 12:20:23 AM b2 = phone a3 = 8/1/2006 12:21:13 AM b3 = email a4 = 8/1/2006 12:33:03 AM b4 = phone
This is what I am trying to accomplish: I want to break each hour, whether it contains data or not and get a count of the different types of source
my desired output would be:
time Phone email 12:00AM to 2 3 12:30AM
My problem occurs because I am unsure how to break the times down into intervals. In my head, I would create a new column and try to break the time up into an interval. So for a2 (8/1/2006 12:20:23 AM), I think I would need to break the date and time up and then determine which interval would be needed based on the time.
I was going to perform the following: =text(a2, "h" + if("mm:ss">30, 30,00)
Basically, pull the hour from a2 and evaluate the mins/secs.
If the min/sec is bigger than 30, put a 30 in the box. Less than 30, put double zero in the box. So for 8/1/2006 12:20:23 AM, b2 would have 12:00 since it falls in the 12 to 12:30 interval.
Once I have all the intervals, I would also need to preform a count on the source cell but I think I can use a vlookup to get the count for the interval.
I was given the following formula by Domenic some time ago that I use along with VBA code supplied by Fin Fan Foom to open do a lookup on a closed workbook:
=If(ISNUMBER(MATCH(MIN(If( Date=D2,If(ABS(Time-E2)<"0:30:30"+0,ABS(Time-E2)))),If(Date=D2,ABS(Time-E2)),0)),INDEX(Contact,MATCH(MIN(If(Date=D2,If(ABS(Time-E2)<"0:30:30"+0,ABS(Time-E2)))),If(Date=D2,ABS(Time-E2)),0)),"") Everything works fine, until I attempt to… - cut & paste a block of cells, or - do a SaveAs, or - change a worksheet name
The formula will no longer function after performing any of these tasks (the cells go blank), and I have to close the workbook without saving to preserve the original workbook functionality. All other tasks, including even importing of different files into the workbook have NO negative effect.
The formula uses an “INDIRECT” named range. Sheet name changes are reflected in the named ranges, but any change of names somehow causes a malfunction (no sheet names are referenced in the VBA).
I thought that the large lookup workbook (40,000 rows) may be a problem, but even after deleting most of the data and retaining only a few rows, the problem still remained.
After the formula cuts out (after performing the above tasks), if I open up the lookup file, then the lookup will work again, but if I close the lookup file, it will stop working.
I doubt the problem is in the VBA code since IT WORKS, and besides, I have other simple VLookups formulas that also uses the same process (and VBA code) and they continue to work just fine when that one formula gives out. The only thing I can think of is that the complexity of that one formula may be an issue.
Anyway, I the original thread is long, so I’m starting a new one here. The original thread is here (Domenic’s formula, pg 7; FFF’s code, pg 8): Dedicated Cell To Choose Lookup Table
I have an array with dimensions (5000,30). I want to perform a worksheet function "Percentile" on specific columns within the array. So for instance I may want to know the element falling at the 50th percentile in column 5 of the 30 column array. Is there a way to do this without having to place the array onto a worksheet?
The spreadsheet has over 200K rows and two dozen columns. My job is to:
1. There are two columns, one is called OCR code where we have repeating ID's and other column is called Minutes Count which is basically a number. I have to filter the OCR column for similar OCR codes(values) and then add their time(Minute Count) so that I get total minutes for a specific OCR code. After adding the min I will copy them into a new sheet with the code in one column, total minutes in another and number of repeatitions for that specific OCR code or count number in a separate column. Example:
Now I've to filter 54xg so that I can only see it and its corresponding minutes. Then I will add up all min for 54xg. Then I will count the number of instances a 54xg has been repeated in spreadsheet(here its 2 but it can be in hundreds in my case). Last thing is to transfer all this data to a new sheet. And automatically repeat the process for other OCR codes like 45fk, 23IS etc...
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
Looking for a way to search an active cell (that has been found using macro) for numerical data and if there is some present paste this in a different location
If there is no numerical data in this this cell then paste a 0 in a different location
An example of the string contained in the cell
Product 7.5% wheat <- i would want 7.5 (or 7.5%) copied to a different cell or Product X <- i would want a 0 copied to the cell the 7.5 would be in from the above
I can find the cell to search in, i just do not know the correct way to extract the information I need.
I was wondering if there was a way to add comments (that you see in spreadsheets) on a userform in vb editor. So that when you run the form and the user moves the mouse over a textbox then it displays the comment.
I am sure this can be done - I found a similar thread but in a different context to what I need.
I have a user of a workbook who insists on putting irritating red cornered comments in cells, rather than using the handy (and rather large) comments field I put in, especially for her.
For each cell, instead using a comment, I need another way to show a large amount of principaly letter texts, without using hypervincules, and ofcourse comments.
By the way, the same text I enter or modify put in this "way", I need to modify in the MSWord document and viceversa.
I appreciate the linking do not open another app, because the large amount of them I need to work with.
I have a sub that works just fine, but I need to test it for blanks.
Sub AddToComment() Dim rCell As Range Dim cCom As Comment Sheets("Support Detail").Select With Range("e5") .ClearComments Set cCom = .AddComment End With Sheets("Sheet1").Select For Each rCell In Range("a4:a23") cCom.Text Text:=rCell.Text & " " & cCom.Text Next rCell End Sub
I only have 1 line of test in the a4:a23 range - so I'm getting 19 spaces before the text in the comment. If the cells within a4:a23 are blank, how do I ignore them? I'm not sure how to interpret this code, so I'm sure it's probably easy:
I have an excel worksheet which has a lot of comments attached to individual cells. Is there a way to convert these comments into a microsft word document along with the contents of the cells to identify where they originated? Also Is it possible to convert just a selection of cells into word document rather than the whole worksheet.
the little red triangle in the corner of cells with comments in. Note: I know how to print the actual comments - however, the colleague I'm assisting only wants to show that there is a comment without actually showing said comment. I'm using Excel 2007.
I have a workbook that I received from a vendor that when I click in a cell a comment appears. There is no line or comment indicator for each comment. So I went into the tools - options - views - comments section and chose no comments. The comments still appear and when I go to the tool bar - view - comments nothing appears. I checked for any VBA code and didn't see anything. I was able to get around this problem by copy/paste special into a new worksheet, but curiosity is killing this cat.
I have several worksheets that have comments in the cells. Most of the comments i have set to "un-hide" and they can be printed. I now have this one spreadsheet where no matter what I do I cannot print the comments.
I must have something turned on or off but for thwe life of me I cannot figure out what it is. I can see the comments on the screen but when I go to print preview they are not there.
I would like to copy and paste comments from one cell to another. I don't want to copy and paste the contents of the cells, just the comments and the formatting that goes with the comments.
I have several comments being placed into a pivot table from a macro. However, all of a sudden, when I changed the source of the Pivot table, the comments now do not appear when hovering over the cell. They only appear way off to the right if I click "review," "Show/hide comment" or "show all comments."
I have been able to use a time stamp code to put a date and time in a cell... I then worked out how to use this to list dates and times in the same cell (instead of replacing the cells contents)... using this
