I am creating a range of numbers from 1 to 2000 with increments of 0.5. Then I have to subtract certain range, for example, 100 to 350. So, the result should display, 1 to 95.5 and 350.5 to 2000.
View 4 RepliesI have a set of data with names in col A, Currency in col B, Amount in Col C. I want to convert all the amounts in NON-USD based on exchange rate I input daily into column D.
How do i search down the row for the next name that is denominated in GBP / YEN etc and keep converting until I dont find any more other currencies in it. I tried to improvise on the finding nth but couldnt get anything out of it. Have attached a spreadsheet.
How do you set the range with whats below? Right now its looking at 4,2 only and if extend to look all the way to 19,2 it will just copy the whole screen. I need it to look at 4,2 and then move to 5,2 and then so on once it has copied all that information to the sheet ...
View 7 Replies View RelatedHow can i set the range for the Sheet3 i have taken IngDataColumn. It select only particular column of fixed that is 4
[Code] ....
i would like to set a criteria bewteen a ranges. eg If A1 >0 but <100 then .3, Else If A1 >99 but <200 then .6, Else .9. How do i write this in the cell?
View 4 Replies View RelatedThis should be easy ... can't figure it out. If I want a formula that wants to perform an action (NPV, but I don't think that matters) on the cell directly above and the next "X" (say 20 cells/years of cash flow) to the right of it, how can I set it up so that I can copy the formula across as well as change "X".
(Obviously, it's easy to select a 20 cell range and copy it across ... but what if I want the length of the range to by dynamic (ie I want to switch to a 40 year NPV instead of a 20 year)?)
I am trying to set an Array to prompt user with a series of questions and input answers into a specific row. However, I want to skip over certain columns and leave those blank. How would I modify my code to do this?
Code:
Private Sub CommandButton2_Click()
Dim ArrQues() As Variant
Dim ArrInput(2) As Variant
Dim lngLstRow As Long
Dim strPNfromSales As String
ArrQues = Array("Enter the Part Number.", _ "Quantity Being Returned?", _ "What is the Reason for Rejection?")
For b = LBound(ArrQues) To UBound
[Code]...
I want the first two questions to be input into Column B & C, but then the third question to be input into column I.
When I'm using the Macro recorder or even after I've completed a sequence is there a way to change the range so it code always covers the complete range of the data?
View 9 Replies View RelatedI have a general list from which a chart is created. Column one contains a date series. There are a fixed number of dates in this series (approx 50 or so).
I would like to select a start date and an end date from this list and have the chart display the data from that range.
Typically I would simply create a new list and build the chart from the list, but I'm kind of hoping that I could do it from a single source rather than make mulitple lists.
I am attempting to set a variable as a range of data that sits on a non-activated worksheet. However, I am getting a runtime error of 13 (data mismatch).
Is there something in my code that may be incorrect? Here is my code:
Dim rRange As Range
Dim sRange As String
Dim tblName As String
[Code]......
Code:
Private Sub Worksheet_Activate()
On Error Resume Next
Set sT = Sheets("Report")
On Error GoTo 0
On Error GoTo nendR
If Not sT Is Nothing Then
[Code] ........
I get a Subscript out of range at Set cT = Sheets("RGA by Customer") line.
It baffles me that when neither sheet exists and the first part runs there is no problem, but when it gets the the above mentioned line I get this error. Same exact code, just a different sheet name.
Again, when the sheet exists there is no problem. Only when I click on Sheet1 (or start up the file) and this sheet doesn't exist do I get the error.
Im trying to set a range using a named range and dont know the best way to do this. so far ive got
Set rDataRange = Range(Offset("datastart",1, 0) & ":" & Offset("datastart",LastRow, 0))
datastart is the named range in the sheet and im trying to make a new range that starts 1 row below where datastart is and end where lastrow is. not sure where i messed up on this but i get errors when i try to run this
I'm having trouble setting the Range "UtilizationRange" using a variable, "CurrentRange" to store that range. I get the error "Run-Time error 1004: Method 'Range' of object'_Global' failed".The rest of my code works when I set the utilization range using the actual range for my purposes, but the problem is the range will change each month and I don't want to change it manually each time. There's a cell in the excel sheet this refers to (AG3) that holds the range value, which in this case is [N7:N75], and I would just like to return that value to the variable "CurrentRange" and set UtilizationRange equal to that.
The value is returned to CurrentRange, but it's the last line that's giving me the problem.
Sub RangeTest()Dim UtilizationRange As Range, Cell As RangeDim CurrentRange As String
CurrentRange = Range("AG3").Value MsgBox (CurrentRange)
'This returns the value [N7:N75], which is what I want
Set UtilizationRange = Range("CurrentRange")End Sub
This is the code that Recorder proffers to simply take a Range of 3 Cells and make Type Font Black/Bold and to place Thin Borders inside the range and Thick Borders aroung the range.
ActiveCell.Offset(0, -2).Range("A1:C1").Select
Selection.Font.ColorIndex = 1
Selection.Font.Bold = True
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
I have a certain number of accounts for opening and close dates. What I wish to acheive is to fill a Range of date from the opening to the closing (or up to 200606 YYYY-MM) in another spreadsheet with the account number corresponding to that date next to it.
The VBA I have right now manages to create the list of accounts but up till 2006. It isnt taking into consideration the closing dates of accounts.
So For example What I want is to set up inside of the loop that to continue to do the loop until it reaches the closing date by YYYY-MM so if the clossing date is 200504 I will have data filled up to that date, and if the closing date is "" then fill the dates up til 200606. Ive tried out a number of ways of inserting the if statement but apparently the string create a problem.
Here is my current VBA and a Sample Sheet of what it looks like....
I m trying to set a range on a cell after using the FIND function in a macro and was wondering if anyone had any experience in it.
Basically, I have a spreadsheet which I am looking up a value that i stored in FID1 with the extension "_EXE"
I'm using the FIND command to find that cell and then set a range so that I can mark it but am getting an error....
i have compiled a multipage using some borrowed code and some code i have written myself. most of it works, but i have a problem populating listbox2.the error is in Private subCmbFindAllJobNo_Click(). i have put h1 tags around the line of code which shows the error when i debug. this code works ok as a stand alone, so i suspect i have done something wrong in the userform initialise.
Option Explicit
Dim rng As Range
Const FirstRow As Long = 2
Dim r As Long
Dim ans As Variant
Dim MyArray(100, 4)
Public MyData As Range, c, d As Range
Private Sub cmbAmend_Click()
Application. ScreenUpdating = False
Set c = Worksheets("ENTRY SHEET").Range("b4").End(xlUp).Offset(3, 0)
c.Value = Me.DTPicker1.Value
c.Offset(1, 0).Value = Me.TextBox1.Value
c.Offset(2, 0).Value = Me.TextBox2.Value ..........
I have a bit of code that builds a formula and uses a variable store the range:
VB:
Sheets("CONTROL").Select
lastRow = Cells.Find(What:="*", After:=[A1], SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
[Code].....
I recently set up some functions based on Chip Pearson's tutorial for referencing worksheets from Formulas. (http://www.cpearson.com/excel/sheetref.htm)
The problem I'm now having is that I can't use VBA to set these functions in place; it returns a syntax error.
For example, I want I37 on most sheets to have the same formula. So I have the following:
Trying to write a macro to transcribe data from columns in Sheet1 to Rows in Sheet2. Assuming there is a blank between each record. I get an error on the "Set Rng1....." line.
View 4 Replies View RelatedI've got two sheet's in a workbook. The first contains data and is setup with dates in column A, day of the week in column B, and values going across by day in column's C through H. As an example it looks as follows:
View 5 Replies View RelatedCurrently (as of Today() = 3/02/2012) in my code my autofiltered range rng is SET to:
? rng.Address
$A$4:$AJ$121
The next
rng.AutoFilter Field:=12, Criteria1:=""
Here is my code
Dim LastCell As Range
Set LastCell = Cells(EndRow, LastCol).Address
I get a "Object Required" when this I try to set the address. I know this is easy.
Im having slow performance reading a CSV file into 34000 sheet named ranges. Currently it takes about 8 minutes to read 34,000 records. After stepping through the code Ive realized there are two bottle necks.
1)finding which sheet that the range name resides see getRangeAddress() and
2) actually setting the value to the named range i.e. Range(ra) = dprecord(1)
The CSV file looks like this: <range name>,<data value>
e.g. DPA_1001,99090
Performanace actually seem to slow as the macro runs.
Public Sub readDatapoints()
'Macro readDataPoints
'This macro will read in the a comma seperated value (CSV) file of datapoints.
Dim sFile As String
Dim currentLine As String
Dim delimit As String
Dim counter As Integer
Dim ra As String
Dim fs As Object
Dim ts As Object
Dim dprecord
Dim oldStatusBar As Boolean
delimit = ","
I'm trying to find the last row on a sheet and then set the next cell, in column A to a certain value. It fails with Method 'Range' of object '_Worksheet' failed.
'activate the male page
sMalePicks.Activate
'add to last row of male baggage
lastRow = sMalePicks.Cells.Find(What:="*", _
SearchDirection:=xlPrevious, _
SearchOrder:=xlByRows).Row
'get next row
lastRow = lastRow + 1
sMalePicks.Range(Cells(lastRow, 1), Cells(lastRow, 1)) = Trim(bagNames(x))
A B
17-Feb 5.00
19-Feb 12.00
22-Feb 7.00
26-Feb 10.00
I would like to see the sum of B given it is in the range from 17-Feb to 23-Feb. My estimations so far:
=sumif(A:A,????, B:B)
How do I set up a criteria which would take values from 17-Feb to 23-Feb?
I also tried =sum(sumif(A:A,{17-Feb;?;?;23-feb}, B:B) but it wouldn't let me.
Particularly the problem is in entering the date in the array.
I'm trying to do a simple loop which creates charts based on an ID number. I recorded a macro and has tried to modify it but am having trouble defining the correct reange when settign the data source. Here is my
View 2 Replies View RelatedI want to have a range of days in a cell, for example in cell A1 will have may 2-may 9. when I use the autofill handle I want A2 cell to read may 10 - may 17 and then if I use it again A3 will read may 18- may 25 and then roll over to the next month . As it stand right now if I put in may 2 - may 9 and use the autofill handle the next cell down will read may 2 - may 10.
View 2 Replies View RelatedI'm trying to do the following
Dim wkb As Workbook
Dim wkb2 As Workbook
Set wkb = ActiveWorkbook
Set wkb2 = Workbooks("F:SuppliersBT Monthly Invoice2014BT Macros.xlsm")
but get a subscript out of range error relating to setting wkb2
The file BT Macros is open - this is where the Macro is stored. What have I done wrong when trying to reference it?
I am trying to count the occurences of combinations within a range defined by contiguous cell values in one column. My problem lies with setting the value of variables that are queried within the defined range. My macro should;
1)Set ComboValue1 & ComboValue2 values to A1 & B1 cells values respectively
2)define range to be searched by how many contiguous values there are in column D
3)search column E for 2 figure combination (defined by A1 & B1). If present increment counter by 1 and add to column C (to be visible in worksheet). If no match carry on
4)define new range by next set of contiguous values in column C
5) step 3
6)when all possible contiguous ranges defined and searched from column c, perform again on next combination down columns A & B with refreshed occurence counter
7)finish when all combinations are searched for
Sub CountComboOccurence()
Dim ListCounter As String
Dim ProgCounter As String
Dim Counter As Integer
Dim ComboValue1 As String
Dim ComboValue2 As String
Dim Rng As Range
Application. ScreenUpdating = False
ListCounter = 0
ProgCounter = 0
Counter = 0
ComboValue1 = 0.......................