I am looking to make pictures a named range to be used in a drop down box. I insert the pictures on sheet 2 and name the cell range they are in, but the drop down box on sheet 1 is blank??????
View 4 RepliesLet's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I have a named range TOT_BUDGET. We use the current month number to access this range's index for current budgets.
=INDEX(TOT_BUDGET,3)
My quandary is that I need to calculate the YTD budget for one of our dashboards. So, I need to get months 1, 2, and 3 and SUM them. Next month I'll need to get 4 months, etc...
I've looked at SUMIF, but it needs to match against some sort of criteria... I don't have any numeric month labels on the budgets page. I cannot figure out what range/array I would match the month number to.
Now, I know the easy way would be to put a month number at the head of each column, reference that array and do the SUMIF. Blech.
Ideally, I would love to just be able to say =SUM(INDEX(TOT_BUDGET, 1-3)). Is there an Excel function that will let me select an array slice?
------------------------------
In addition, we are getting the Total Sales number out of Great Plains via an SQL query. We summarize many accounts using a pivot table. We then access this table by using the GETPIVOTDATA function.
GETPIVOTDATA("NETCHANGE",TSALES,"FISCALYEAR",CurrYear,"FISCALPERIOD",CurrMo)
Again, how can I do a total YTD?
Is there a way I can do something similar to a foreach loop in the cell formula? I'd like to avoid macroland with this if possible.
I am trying to check whether a cell is part of a named range. I have a 4*2 range named "kompleks" and wants to check whether the selected cell i part of that named range. I've searched google and this forum, but nothing will work. I've tried
If Target.Name = Range("kompleks") Then
If Target.Name = kompleks Then
And also
If Target.Name.Name = Range("kompleks") Then
It is used as a private sub for the worksheet_change.
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedWriting up some code, and I have a workbook with many named ranges. Question is simple...
Are named ranges a part of a collection object that I can use?
Looking to do something like:
[Code] .....
How to determine collection objects on my own in the future!
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View RelatedMerge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
What is the proper syntax for working with a Range with to name it after the PasteSpecial command? The Selection approach I am trying here does not seem to work unless I am currently within the same workbook.
[URL]
VB:
Sub Create_Dashboards()
With Sheets("Revenue Model") 'Strat Plan Revenue
.Range("J2:S9").CopyPicture
.Range("A42").PasteSpecial
Selection.Formula = Range("J2:s9").Address
Selection.Name = "Strat Plan"
'more code here
End With
End Sub
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
In Excel 2010, is there any way to paste a picture into a small picture/diagram box, and upon double clicking the picture it would explode to a larger size? And I guess double clicking it again would make it return to its original (smaller) size. I would be pasting several pictures into several different picture/diagram boxes and would need this to be a relative reference so that upon selection it explodes the appropriate picture?
View 1 Replies View RelatedI want to have a sample file in excel which store picture of student in comment, I did this, but when I want to insert picture the file dialog appears, and if I click cancel, then there is an error, why? If some one optimise the code it would be very nice
View 6 Replies View RelatedI found thru this board's search function the solution to my original or saving excel range into a graphic file. {url} ...
View 6 Replies View RelatedI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
I have done the above where when I select a picture name from a drop down list it displays the relevant picture in another cell by using the IF function in the named formula
My question is why cant I use VLOOKUP instead of IF in the named formula. When I use it it comes with an error.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedMy searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I have to group some data from a pdf format.
I import them into a excel worksheet, but the problem is with selecting them, because the data are really messed up. I tried selecting them with sumproduct with criteria, but the problem is that the formula wants the criteria to be a text that is in only one cell, whereas in my case there I would like the formula to select for example the cell that has the text "Visa34" as well as the cell with "Visa12,FIB3" (i.e. all the cells with "Visa" even thought there might be other words or letters in the same cell...).
I'm trying to write VBA that will unhide all the rows in a designated range ("Apples"), except the first and the last.
I'm using this simple code to hide the range: ...
I have below four column range. I need a formula to sumproduct column A and column D, where column B = "n1", column C = "xyz" and until sum of column A reaches first largest value which is less or equal to a variable, say 15. So, the rows would be 1st, 2nd and 5th. And the result - 1,440.
A B C D
2n1xyz110
5n1xyz112
8n2abc112
3n1abc111
6n1xyz110
6n1abc114
3n1xyz114
2n1abc112
3n2xyz114
8n1xyz114
8n1xyz115
4n1abc115
I have worked our an CSE formula below, but it is really massive. Need to have much simplier one.
={SUMPRODUCT(--($C$1:INDEX($C$1:$C$12,MATCH(LARGE(IF(($C$1:$C$12="xyz")*($B$1:$B$12="n1"),$A$1:$A$12),COUNTIFS($C$1:$C$12,"xyz",$B$1:$B$12,"=n1")-SUM(IF(FREQUENCY(IF(MMULT(--(ROW($A$1:$A$12)>=TRANSPOSE(ROW($A$1:$A$12))),--IF(($C$1:$C$12="xyz")*
[Code]....
How can I add decimal part of values in a range
eg: assume my range has 2.27, 3.1, 3.725, 4.1, 4.35
result should be 789 (27+1+725+1+35)
I have a refedit box in a userform wherin i will be selecting a range and thus getting a value say "$A$1:$A$2"
Now what i need is that it should seperate the value as follows so that they can be used in another place
starting column to a variable x.
starting row to a variable y
similarly
ending column to a variable p
ending row to variable q
Looking for code that if i select more than 1 column in the refedit it should tell me to select a single column and not more.
I want to go ("E:E") and if part of the cell contains "WAL-MART" than put the word "Food" in cell G of the same row and contunie until end
View 1 Replies View Related