Copy Picture Of Range And Name Range Pasted To?
Apr 8, 2008
What is the proper syntax for working with a Range with to name it after the PasteSpecial command? The Selection approach I am trying here does not seem to work unless I am currently within the same workbook.
[URL]
VB:
Sub Create_Dashboards()
With Sheets("Revenue Model") 'Strat Plan Revenue
.Range("J2:S9").CopyPicture
.Range("A42").PasteSpecial
Selection.Formula = Range("J2:s9").Address
Selection.Name = "Strat Plan"
'more code here
End With
End Sub
View 4 Replies
ADVERTISEMENT
Feb 19, 2008
I have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
View 4 Replies
View Related
Mar 23, 2008
I have a data range in sheet1 that I would like to copy into a new sheet. to copy I have used the following code
Worksheets("input").Range("input").Copy Destination:=Worksheets("temp1").Range("B12")
I would like to name the data that has been copied into sheet"temp1"
View 2 Replies
View Related
Mar 26, 2008
After pasting a Range and while the Range is still selected, I would like to Name it. May I have some assistance with the proper statement?
View 9 Replies
View Related
May 29, 2009
I have this code going for a sheet i've been working on, but thers only one thing I can't figure out how to do.
I want it to take the text that was entered in the "Grid Date" input box and stick it in the bottom 10 cells (plus one space). IE - if A14 is the last used cell, paste it into A16 through A26.
View 2 Replies
View Related
Jan 27, 2014
Below is code I have attempted. I am learning VBA and have gathered this code from the internet and this forum. I have data that is in columns B to E and from row 7 down. I want this VBA code to run when data is copied/pasted in these cells. Where the last values stop will vary so I just want to be sure this code is executed after all the data is pasted in these cells. The data will be pasted at one time. When the user removes the data from these cells, I do not want the code to run.
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if less than four cells are changed or content deleted
If Target.Cells.Count < 4 Or IsEmpty(Target) Then Exit Sub
[Code].....
View 1 Replies
View Related
Mar 4, 2013
I am looking to make pictures a named range to be used in a drop down box. I insert the pictures on sheet 2 and name the cell range they are in, but the drop down box on sheet 1 is blank??????
View 4 Replies
View Related
Apr 14, 2008
I found thru this board's search function the solution to my original or saving excel range into a graphic file. {url} ...
View 6 Replies
View Related
Mar 16, 2013
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
View 4 Replies
View Related
Oct 7, 2009
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Sep 24, 2013
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
View 3 Replies
View Related
Dec 23, 2008
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
View 2 Replies
View Related
Oct 2, 2008
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies
View Related
Mar 3, 2008
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
View 4 Replies
View Related
Jun 22, 2008
I'm developing a loan processing system for members of a club. When an applicant asks for a loan, the club will calculate 10 % of that interest and the applicant will have to pay it back in 5 successive fortnightly instalments. If he asks for a loan in the first fortnight (1), for example, he will have to start paying instalments in fortnights 2,3,4,5,6 to pay it all back.
The system currently has 4 worksheets. The first sheet is a the loan application form. The cells outlined in thicker border, are the cells in which details must be input. Once it is input, the data will be automatically placed in the Processing worksheet using IF and VLookup functions (See spreadsheet attached), which is used as a basis for the loan schedule Worksheet. What I need is a macro that will copy the range filled in the Processing worksheet, and copy it to the exact same location in the Loan schedule worksheet (The cells with the same fortnight columns and the same member name. This is how the loans are to be filed.
View 2 Replies
View Related
Feb 24, 2013
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
View 3 Replies
View Related
Aug 5, 2014
I have attached xl sheet for ref.
I have value in E2(5),F2(10)=G2(5[sub of F2-E2])
I need to find E2(5) value in B2:B21 and the same of F2 also
After finding that
(eg): E2 value 5 present in B6 cell and it should come to c6 cell same of F2 also
Now It should select C6 to C11 cells.(ref of B6 to B11,ie,5 to 10)
I tried in vba and formuals but i couldnt find solution.
View 6 Replies
View Related
Jul 16, 2009
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies
View Related
Jan 8, 2008
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies
View Related
Mar 19, 2008
1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
View 6 Replies
View Related
Mar 29, 2013
I have a number of spreadsheets (12) that feed a summary sheet. The 12 sheets derive their static information from the summary, e.g. item names, dates, etc. While data is input into the 12 sheets.
I am trying to create a macro that will add a row, for a new item, in all of the sheets. I have a range defined below the last row of the items section that needs to be copied to the new row - this is not the last row of the spreadsheet. Each sheet has a different range name as they are for different periods.
View 1 Replies
View Related
Dec 15, 2011
I want to put this formula on sheet2 in cell Q11 but not sure how to do the copy command in the formula?
If(Sheet1!Q11="True", copy Sheet1!B11:O11 to Sheet2!B:11:O11
View 3 Replies
View Related
Dec 22, 2007
I have the following sheet1 (" Case Preview")
column a column B column C
ID project Custodian
1 ABC James Johns
2 DEF John Doe
3 GHI Laura DiNapoli
4 JKL Lydia Koernell
I need to be able to display the custodians in column C on sheet1 ("Case Preview")
in sheet2("Search Term Breakdwn") starting in B10,C10,D10,etc until all the names in column C are there. The tricky part is that column C gets populated each month with different custodians coming from different dbs, so I have to be able to know how many rows in column C are populated with info.
I saw a few postings here regarding transpose and tried to used it, but to no avail.
I am using the following
Sub copyrows()
Dim MySheet As Excel.Worksheet
Dim MySheet2 As Excel.Worksheet
Dim rcell As Range
View 9 Replies
View Related
Sep 28, 2008
i have a main.xls file and two data file dat1.xls and dat2.xls
mail named file have ar - br- cr- dr- er -fr sheets
dat1 named file have ar-br-cr sheets
dat2 named file have dr-er-fr sheets
and all this files data source is
colomn source a - fd
row source 29-4000
i want to make two commandbutton to main file first for dat1 second for dat2 file and i need a code to use at this buttons to make
when dat1 and dat2 close
main file user when click first button
copy dat1 file ar sheet colomn source a - fd row source 29-4000 cells to main file ar sheet colomn source a - fd row source 29-4000 cells
copy dat1 file br sheet colomn source a - fd row source 29-4000 cells to main file br sheet colomn source a - fd row source 29-4000 cells
copy dat1 file cr sheet colomn source a - fd row source 29-4000 cells to main file cr sheet colomn source a - fd row source 29-4000 cells
View 9 Replies
View Related
Aug 7, 2008
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
View 9 Replies
View Related
Feb 2, 2010
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
View 9 Replies
View Related
Mar 2, 2008
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
View 10 Replies
View Related
Jul 25, 2012
I want to know how to copy a range into an array then an array back into an range.
Code:
Dim a(3,3) As Double
a(3,3) = Range("C3:E5")
Range("C10:E12") = a(3,3)
View 1 Replies
View Related
Jun 8, 2009
First of all, I would like to thank all Excel Forum Moderators and Members especially Andy Pope for the great effort they exert to help all members.
Lately, I viewed the thread available on the following link and I admired the great perfect work and codes provided by Andy Pope so much,
http://www.excelforum.com/excel-prog...-userform.html
My request is similar to the points discussed in the above mentioned thread, but, it is a little bit different ..
Instead of inserting the picture to the worksheet, I want the picture to be copied from one folder on the HD to another folder called (Employees photos), which is located in workbook's path.
In other words, I need a code to copy one jpg picture from one location to another.
View 6 Replies
View Related
