How do I stop a pivot table adding data together?
e.g.
1st Nov -100
1st Nov - 100
2nd Nov - 200
2nd Nov -200
I want this but instead get this:
1st Nov - 200
2nd Nov - 400
I need the pivot to split it out,
I do not know if this is possible, I have a pivot table, however I would like to be able to sum a particular range based on start and end date. then by make and model as the second set of criteria, The sum would be displayed into a form on a different worksheet. attached is a file so I would like to know the total
View 3 Replies View RelatedI have a set of data that I'm trying to identify the unique values in a column and then sum the related quantites against each of those values:
View 14 Replies View RelatedIs there a way to tell a row in a pivot table to keep together when printing? Example if I have a row for Item and then a row for year after that, I want all the years for that item to print together on the same page.
Item1
2010
2011
2012
<page ends>
<second page>
2013
2014
Item2
2010
2011
2012
2013
2014
I have recently noticed a problem with a pivot table and assoicated pivot chart. The table has numerous columns from date, location and one entitled route. The route column has a value which is either a number or 'other'. The formatting of the column has been set to general (although the same problem was present under text). The problem is as follows:
When a new row of data is entered where the route is the same value as previous rows it should be grouped together. However when I go into my pivot table and look at the options for route I find the same value repeated twice. ie a route value of 155 will be listed once at the top and then lower down the list. A temporary fix is to rename all values of 155 to x155 and then back to 155. This then has everything grouped again under one value in the pivot table. As soon as new entries are added though the problem repeats itself. Does anyone know why this might be?
I was wondering if there is a simple way of deleting past entries from a drop down list for a pivot table. I have tested my spreadsheet and now want to create a 'blank canvas' for users.
View 3 Replies View RelatedI have attached an example of what i am trying to do. I can work out how to calculate unique entries by putting in a formula under a pivot table, but is it possible to select an option in the pivot table settting which will give this result?
View 2 Replies View RelatedI have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
View 2 Replies View RelatedI have some numbers I used to enter successively in Cell A5, what I want to get is the total of the entered number.
But I want the result to be entered in the same Entry Cell (A5)
Acually I tried many ways (VBA Codes and Worksheet Functions) to reach my goal but unfortunately I faild, so I hope that I find the answer here.
Many years ago I created a complicated spreadsheet that calculated employees's leave, sick, vacation etc. The timekeeper would indicate the amount(s) used for a particular day and it would automatically calcuate. The problem with this is that the time keepers do not use .25, .50, or .75 for the fractured time. Instead they used .15, .30 and .45. Previously, I used a convuluted if statement looking to the right of the leave to figure out what and how to calculate it and I'm trying to revamp it to make it more streamlined.
View 14 Replies View RelatedI have a excel sheet with a macro set up. On the main sheet is all the information with expiry dates. Now each entry according to the expiry date goes into another sheet (Monthly Sheets) in the same document. However if you add to the main list and press go it re-sorts the list and duplicates are put into the monthly sheet. (Hope that makes Sense)
Here is the code from Naras for the sorting:
=COUNTIF($A$1:$D$100,A1)=1
however I don't know how to change that to suit my needs (or even if it is at all possible to change it to suit my needs)
I will try my best to explain how my spreadsheet is set up as unfortunately I am at work and I can not use the method to show you the spreadsheet.
My spreadsheet:
I already have Data Validation in use from a list that I created. I use the same validation list in Columns C, E, G, I, K-BA
I also use validation list in other cells, and it is OK if these are duplicated throughout the row.
The only cells that should not contain duplicate information are the ones from C, E, G, I, K-BA
Basically I want to stop someone accidentally chosing the same option from the list within the same ROW.
Just in case it makes any difference I should let you know that I have already had help from the forum regarding macros for this same spreadsheet, here is the macro that is currently running just in case it makes a difference if there is an answer to my current problem.
Option Compare Text 'A=a, B=b, ... Z=z
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cell As Range
Dim Rng1 As Range
On Error Resume Next
Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1)
On Error GoTo 0
If Rng1 Is Nothing Then
Set Rng1 = Range(Target.Address).........................
I want to use (VBA) data vaildation to restrict duplicate entries.
Worksheet Name = "Metal Type"
NoDupe Cell = B15 (allowing text and numbers)
Range to check = (Sheet)="Metal Type" (Range)=A21:A100
Error = Message box "Enter Unique Name in Cell B15"
Then Exit Sub
I have a birthday list with name, client, birthday. I want to create a pivot table that groups by month. Report layout is tabular. Then within that month, name, client & birthday (in date order). So my end result would look like;
January Jim Jones Company 1/4
Then rest of January names 1/15
Etc.
Right now, I can't get the birthday to sort by date within the month.
Inside my raw data, there is a field for dates with the format of "mm-dd-yyyy". When generating the pivot table, the date is simply "mmmm". Where did the rest of the date field go?
View 1 Replies View RelatedI am having the hardest time trying to get my pivot table to sort right. I downloaded data over a 7 year period and its sorted by months (January-2005 etc). The issue I am having is excel is putting it into this format
January-2005 January- 2006 ......... February - 2005 February-2005.
I need it to sort chronologically
jan 2005, Feb 2005, March 2005...... Jan 2006, Feb 2006 etc.
What do I have to do to get this fixed. I would rather do not have to do it manually each time I need this type of data.
I am recording events on a day to day basis in excel using the first column as the date, second column as start time, and third column as end time. So an entry might look like 1-Jan _ 13:00 _ 13:40, in the three columns across. There will be multiple entries for each date, but the number of entries for each date will vary. Entries may also overlap in times. For example, the next row may read 1-Jan _ 13:10 _ 13:45. Some times there will be gaps such as a third row readng 1-Jan _ 14:15 _ 15:00. What I would like to do is compute the total elapsed time spent on projects for each day, not counting any overlaps. SO even though the total time spent on those three projects for January 1st is 120 minutes, I would like to know how much time during the day is spent doing work, regardless of how many projects are being done at the same time. So I would like excel to be able to tell me that on January 1st , 90 minutes of the day was spent on work. Hopefully this makes sense. I also need it to distinguish between dates so that it can tell me how much time was spent on January 1st. then January 2nd, 3rd and so on. It would be great if this ould be computed as the data is entered. Maybe It could record it on a new sheet with a column for each date and then it lists the time spent on that day in the row below it.
View 9 Replies View RelatedI am challenged/very frustrated with my pivot table which will not group dates (returns an error message).
In reading other posted questions, I see that my problem is caused by empty date cells. Is there a way around this?
My spreadsheet will be used daily to input Invoice details - part of which is the date of invoice. If I were to select 'refresh data', this would not be pulling through any new data as it wouldn't be in the range. I had made my range A1:K1500 to incorporate future entries, but then I have empty date cells as to date there are only 200 entries.
I have a pivot table which contains dates in the drop down list. I wanted user to pick dates from calendar control tool rather than pivot table dropdown list.
I put the following code;
Private Sub Calendar1_Click()
If Weekday(Calendar1.Value, vbMonday) < 6 Then
Range("B3").Value = Format(Calendar1.Value, "dd/mm/yyyy")
End If
End Sub
it works for most of the dates but not all. Also it does not recognise the dates in the new month.
I'm trying to copy the value of one column to another, column A has date and time in this format: 6/1/2013 6:35:00 AM and I'm trying to get ONLY the dates to another column so that when I do my pivot, I can sort it out by date. I tried =A1 and I can format the column to how I want it but the value of the cell still remains in date&time. Is there any formula I can use? or should I change anything in my pivot table?
View 4 Replies View RelatedNot sure if this is possible but I have a sheet of data which is effectively a project plan. It has a list of resources, role and phase etc. I then have lots of rows which are w/c dates and under each "week" I have the amount of hours or days they work. So for each person I can record their hours etc.
I then need a Pivot which basically collates the data and displays each phase's total hours but month. There maybe multiple phases or and each person may appear in each phase
I've attached an example - Excel Problem.xlsx
I have a question with regards to the display of the Date filter in a pivot table I am making.
As it stands, the filter function is displaying like this : date 1.JPG
I am looking for the filter to look more like this : date 2.JPG
I believe that I have all the dates in the source table formatted as "Date".
I have inherited a spreadsheet that I need to update soon. It takes data that has a date field and creates a pivot table by month. The person who created it completed it thru February. Now I have added data for March and April, but the pivot tables can not find this new data and I suspect it is because of the date formatting (I have done the Change Data Source under PivotTable Options to include all the new data).
The reason I suspect the date format is that she built a button to run a macro named "dateformat", which is not in the workbook. I have tired to manually format the date using the format painter from the February dates that the pibvot table recognizes, but I still get no results.
I have attache a file to use as a reference, the real file is over 10 000 rows long.
What I need is to be able to quickly make a summary of each company within a certain period (let's say monthly) and be able to calculate the sub total of the GST column. Every report that's created than needs to be saved and put into a seperate file e.g 'TFQ Sep 07'. I understand I need to use a Pivot Table but can some one just give me quick example of how I would do this?
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
It's a given that formatting doesn't alter underlying values in all areas of Excel, merely changing the way cells look. But in the attached I show two pivot tables using exactly the same data with the sole exception that the first one has the date numbers formatted as numbers whereas the 2nd PT has the date numbers formatted as dates.
With the 2nd PT it will accept the Group by month functionality whereas the 1st PT won't.
On the face of it PTs seem to take more notice of the way a number is formatted when it comes to grouping rather than treating the number as a date which it can group.
How to filter the pivot table in the attachment by the Posted date. I only want to look at the data for dates within 30 days of today, and can't figure out how to do that manually, much less programatically. The attachement is a small sample of a huge report I receive; all I get is the pivot, which contains tons of information. I filter it down by my various criteria, but that's still hundreds of thousands of lines. Limiting to the last 30 days can make a huge difference, but I can't find the trick to it.
Example.xlsx
I have a pivot table where I would like to add a column for the date next to each item listed in the pivot table. When I do this the pivot table sums the date, which is an incorrect number because it is adding a date to other dates. If I move the data to the row option it moves it under each item and the formatting is off. Is there a way to add the date in as a column without it sub totaling? I need the other columns to keep their totals.
I also was having issue creating a calculated field - below the total to show cost per item and then the profit. Is this possible.
I created a screen shot example to show what it is doing. (1st picture)
2nd picture shows what I would hope to achieve.
[IMG][/IMG]
[IMG][/IMG]
Have a simple Pivot table that i have grouped in 14 day buckets.
Currently, the date range looks like this:
1/21/2013 - 2/3/2013
However, I want the range to show the 'last' date only.
Is there a simple way to do this? I just can not see it in the format cells menu...
I have a table with business data such as units sold, revenue etc. entered by date (1/1/14, 1/2/14...) for 4 different business units. I have this data summarized in a pivot table. The pivot table is set up with the date filter as a row label. I would like to have a consolidated report on another worksheet with a drop down menu being used to control the date filter on my pivot table.
The following items would be on the drop down:
Yesterday, Month to Date, Quarter 1, Quarter 2, Quarter 3, Quarter 4 and Year to Date.