How to plot circles via vb. Basically I would like to plot circles on the vertices of a triangle with the following data.
1) length a = 69, b=103, c=119.9967, angle between a and b =86.1. (These values are determined from the cosine rule)
2) Diameter D1=40,D2=98, D3=108
See link of circles : IMAG0176.jpg
use the “INDEX & MATCH” formula and I thank him very much for that. Now, I have another problem which I think the “IF & ELSE” statement may come into play. I am trying to calculate the cost of a cushion that is governed by it’s thickness.
Example:
ABCDEFGHI
1CushionB/FrontS/SideBorderQuantitySeat
2Feather121251£8.25
3Feather121241£7.32
4
B2 represents 12 inches
C2 represents 12 inches
D2 represents 5 inches
144 represents square foot
The calculation is,
F2=B2*C2/144*D2*£1.65*E2..............
i am trying to finish a spreadsheet off using cos functions. I want to convert 26 degrees into 0.8988. when i use my hand calculator i type 26 in then press cos and it converts it to 0.8988 which is correct, but when i try to use the excel cos function it gives 0.646919322 which is in-correct.
View 5 Replies View RelatedIv got Column A with angles between 0 and 1.56 radians. These angles are generated randomly, so it can be 0.22, 0.56,1.55 etc etc...Now in column B Iv got to carry out a function. The function is =43.22/COS(AX) X depends on the corresponding value in column A.
Every thing is fine up to here and I can do it...BUT I only need to carry out the function if the angle in Column A is smaller than 1...And if the value is bigger than 1 it only needs to output a value of 80. Thats it so...depending on the value in column A it will either carry out =43.22/COS(A) OR just make it show =80.
Im writing a program in VBA excel that displays two circles in excel spreadsheet, these two circles have been set X and Y Co - ordinates. Using the X and Y Co - ordinates i want to connect a line from shape 1 to shape 2
ActiveSheet.Shapes.AddLine(495.75, 234#, 682.5, 234#).Select
I want to draw circles from 3 points and other geometrical shapes. The points will be given from clicks on the background picture.
View 1 Replies View RelatedI've recently come across this wonderful site and have found it to be a pool for great information. I looking for some assistance with finding a macro that will draw circles/dots on a worksheet when the left mouse button is clicked at the mouse cursor location. There may be something out there already??? Here's exactly what I need; I want a macro that will draw 7 different coloured circles (blue, pink, cyan, lime green, red, yellow, and orange) on a worksheet. The macro would be activated from a button (7 different buttons- one for each colour) on the worksheet and when the left mouse button is clicked the coloured circle is drawn at the mouse cursor location.
View 9 Replies View RelatedIn the attached file, there are three sheets: Data and Private. Sheet Data contains data source. I want to try to covert the data in sheet Data into Private in triangle format.
For example, Sheet Data range A1:A5 will be converted into the latest diagonal in sheet Private range A1:E5.
Sheet data range D2:D5 will be converted into the second latest diagonal in sheet Private range A1:E5.
Sheet data range G3:G5 will be converted into the third latest diagonal in sheet Private range A1:E5.
Just follow the step, there will be a triangle range A1:E5 in Private. Same thing, there will be another triangle in Private.
During the past few years, I use an Offset/Row/Column formula to create a triangle. I feel code can do the same thing because the data structure follows a kind of pattern. I tried and failed.
Sheet1, there have data in A1 (100);
Sheet2, there have data in A1 (200) and A2 (300);
Sheet3, there have data in A1 (400), A2 (500), A3 (600);
Sheet4, there have data in A1(700), A2(800), A3(900) and A4(1000).
Now I want to use For Loop code to copy the data in Sheet1 through Sheet4 and paste them in Sheet 5 beginning with A1 into a triangle format:
100 300 600 1000
200 500 900
400 800
700
I have a 22x22 matrix with correlations; I want to extract the lower traingle as a single row; so my matrix is
# r1 r2 r3 r4 r5 etc
r1 1 0.5 0.3 0.7 etc
r2 0.5 1.0 0.5 etc
r3 0.3 0.5 1.0 etc
r4
r5
etc
I want my row to be
r11 r12 r13 r14...r1-22 r21 r23 r24 etc..
I need to write a spread sheet that will calculate the length of 2 unknown sides of a right triangle using the following information.
Here is what I know
1. I have a right triangle
2. I know the length of the hypotenuses
3. I know the ratio between the length of the other 2 sides
I need to write and Excel file that will solve for the length of the other two sides
The math look like a^2+b^2=c^2
with c being known and the ratio between a and b known
I sent an excel file to a friend. When they opened the file a half triangle mark appears in any cell where there is a formula. How do i get rid of this mark?
View 3 Replies View RelatedI have a matrix that calculate lenght of the sides in a triangle, this is for the purpose of a camera and the pixelsize/inchsize.
Is it possible to create a chart that will give the user an visual control on how the cameras detection area looks like?
In my attached sheet I've to find out final result in Column "F" (green shaded). My boss many times a year increases salary by certain percentage (say 30% or 40%) which is given in "E" column. After that I need to adjust it according to Pay Scale given in right side. For example one Executive's salary reaches 19880 after % increase. Now in pay scale we see in executive (row no. 13) it crosses 19800 so his final salary should be next upper value i.e 20600 (if it reached to 20700 after % increase, then his final salary could be 21400). That is final salary should be multiple of designation's increment plus minimum gross salary (Here 800X10=8000+11800=19800, since it exceed by 800, so salary should be 800X11=8800+11800=20600)
So we can either pull data from right side table or we can give formula in "F" column to get the required result.
salary adjustment.xlsx‎
Does anyone know an efficient formula for the “five-even” rounding rule? Someone asked me about this and gave me these examples:
6.6 must round to this ==> 7
6.5 must round to this ==> 6
5.5 must round to this ==> 6
8.5 must round to this ==> 8
9.5 must round to this ==> 10
66 must round to this ==> 70
65 must round to this ==> 60
55 must round to this ==> 60
85 must round to this ==> 80
95 must round to this ==> 100
I am working on a maintenance form that I have attached.
I am wondering if there is a formula or condition that I can input to find and mark all the spaces that fall on a weekend.
Either to have the form auto-populate with a "W" as I have done in the form, or shade the boxes that fall on a weekend. Shading would probably be better or even shading with the "W".
Is there any way to create a cross-validation rule between 2 cells?
For example,
Cell A5 will have one of the following values (AA, BB, or AB) ....
Depending on the text entered into one cell, I'd like another cell to state n/a. For example, if cell a2 shows the text of cash, then cell b2 would show n/a.
View 3 Replies View RelatedI am using excell 2007 and am having a few problems with conditional formatting.
I am trying to do the following.
i have 6 cells in 6 columns ( c2, d2, e2, f2, g2, h2 ) each with figures 17.14+
Now i am trying to add a formula so when ever i insert a number in the cell below e.g c3 i want the cell c3 to turn green or red depending on the value in the above cell (c2).
so in all:
c2 has the value 17.14
if i insert the value 17.14 or less in cell c3 i want the c3 cell to turn green.
if i insert the value 17.15 or more i want the cell to turn red.
now i know how to do this in the conditional formatting feature but i want to do this will all the cells refering the the cell above.
i also do not want to create 6 diffrent conditional rules.
Is there a formula i can use that can be pasted into each cell and the cell number edited?
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
What I need is for in the order start date column, I need a formula to pick out the first year where the value is inserted into the column and then insert the year into the order start date column. I would do this manually, but with thousands of rows a formula would prove to be most beneficial.
2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 Order start date
515 151 2013 200 2015 1515 2018 5454 2012
I have a project where if the user enters 'R' into cell H17 then cells B19:K19 are to be filled with black color. These cells are divided into three fields: B19:E19, F19:H19, and I19:K19.
When I select these three fields and use the conditional formatting tool the only cells that are black are B19:E19. Even though the rule explicitly shows that cells B19:K19 are to be affected. In order to have all three fields black I have to make three rules (one for each field).
The same behavior happens when I use the conditional formatting tool and select the cells from within the tool's dialog.
How can I get all three of the fields formatted with one rule?
Is it possible to create a rule that every time I type my name, for my e-mail address to pop up in excel instead?
For example, if I type "purple1686", I want "12purpleexample@domain.com" to show up as a hyperlink to my default e-mail program.
I am also curious if I was to write "my website" is it possible to make it a hyperlink to "www.purple1686example.com"?
Those two first may be easy to answer, so here is the challenging part for me:
Can I make that happen as a rule on every spreadsheet I open?
I don't know if I should make a template, or use a formula? The ideal scenario would be if there was a way to do it through conditional formatting.
I have used conditional formatting to change the color of a word every single time I open a new template and paste the words into it, or even by typing them out.
is there any rule for random number to be picked up? Any Rule, Any Formulae, Any Calculation Anything, Any authentic routine which may guess what would be the next random number? for example if first random number is 825587 then what would be the next?
View 4 Replies View RelatedI'm trying to find out the rule for de-duplicating data. I am removing duplicates based on an identification number in a data set of about 6000 records, including the duplicates (some records appear about 4 times). Due to the nature of the data I'm working with, there are only a handful of records that are "true" duplicates, i.e. some of the records appear 4 times but there is a difference in terms of location, etc and some are true duplicates in that there is no difference.
I need to know how Excel removes duplicates - does it only keep the first line that it finds for that identification number? Also, is there a way that I could create a rule for it to keep the record with the highest rate for example?
Want to make an if rule where a student gets overall 75% in a column, then in another column next to that that would automatically give him a B or a B+ you know what I mean?
Hear are the ratios
A+ - 90-100
A - 80-89
B+ - 75-79
B - 70-74
C+ - 65-69
C - 60-64
D+ - 55-59
D - 50-54
E+ - 45-49
E - 40-44
and another one
Excellent - 80-100
Very Good - 70-79
Good - 60-69
Moderate - 50-59
Borderline - 40-49
Is there a way to programatically count the amount of conditional formatting rules in a workbook as i have been given a workbook which performs really slowly and the amount of rules seem to be a lot just wanted to count them
View 5 Replies View RelatedIs there a way color a cell red if the the text is "Z" or a number between 0.5 and 10
Or if the cell contains a "Z" or a "C" ....
how to adapt the solution so it would work in multiple cells. Since I was told to start a new thread, here it is. I want to format a cell based on its contents, If it has one of three entries, it should be greyed. I then want to use the conditional format across the whole page, but the solution given in the other thread refers to a single cell, how can I do this without that reference?
View 2 Replies View RelatedI want to set a conditional formatting rule that makes a cell red or green depending on if the value in the cell is larger or smaller than the value in another cell +2% or -3%. If neither of these conditions are met no formatting should be applied..
a) In the cell (R104) where the condition is set I have the following formula:
=if(BP104=0;"";BQ104/BP104) (the values in BP104 and BQ104 is retrieved from a database)
b) The conditions I've set in R104 are the following
1) =isblank($R$104) (condition: "nothing")
2) =$R$104<$R$106-0,02 (condition: "red")
3) =$R$104>$R$106+0,03 (condition: "green")
c) In cell R106 the value there is a value of 90%
The conditions seem to work fine when the value in R104 is higher or lower than the conditions set in 2 and 3 above but when the value is blank in R104 the cell goes green, which it shouldn't.