I would like to pull all rows and columns from a table and copy them to a separate sheet. I would like to pull the data if a certain value is present in a particular column. Essentially, it is the same effect of filtering the data but I don't want to have to keep filtering and copying specific cells and pasting them into a different sheet if I need to change the raw data.
Example: I would like to copy all ids, store, and partner information IF the partner is "X". I would like to put this information in Sheet A.
I have a file with many intercompany transactions. There is a range of business unit numbers that if anyone one number is in both Column B "Bus Unit" and Column E "Affiliate" I want the row deleted.
Please see the attached, it is more clear I hope. The two yellow rows would be deleted. The list of business units that I would want to never be on the same row is "4, 7, 41, 44, 46, 51"
I am looking for an Excel VBA code that can delete pair of rows that has certain criteria. I have included an example in the attachment and highlighted the rows that should be deleted. Since the values in each coloumn is going to change every day , I am looking for a dynamic code.
The objective is to:
To delete rows that has same code (columnd D), same basis (coloumn E), same Effective (coloumn H), value of TT (Column J) is either TI or TO and has offsetting Amounts (L) ie the sume becomes zero. Example pair of row 7 and row 8 as well as pair of row 12 and row 13 should be deleted.
TO and TI are actually transfer in and transfer out. Since the TI and TO for these rows make the amount zero for same code and same basis on the same effective date, I do not want to include this in the spreadsheet.
I have a range of data and need to summarize some of the data. In the table below is an example of the data. I would like to have a single formula where I can count the number of rows where the end date - start date is < 14 days. I would prefer not to add an additional column for the datediff value. Is there a way to do this with either arrays or named ranges?
Name Start End Other data Verizon 1/10/2010 1/25/2010 AT&T 3/2/2010 4/14/2010
On the attached example i would like a formula in F2 which sums all the values where column equals "Smith" and column B equals "Golf European". I'm assuming it would involve the SumIf formula but i'm not sure if this is the best solution when the criteria is in two columns?
Basically, need to count rows that have 5 columns of data in it. If all 5 columns within a row have something in them greater than one character, that row needs to be counted.
BP Formula.xlsxI'm not sure what formula to use or if Excel can do this. I want to use it to determine number of blood pressures in a certain range. So if I use column A for SBP (systolic BP) and column B for DBP (diastolic BP). I want a formula to tell me if column A is between 140-159 or column B is between 90-99. I can get that part, but what I'm having trouble with is it counting each row twice if both column A and B meet the criteria, whereas I want every row (person) to only be counted once if either column A OR column B meet the criteria. (See attachment)
I have a filtered list of data expanded to "all" in each column. One column is "percentile" (25%, 50%, 75%, etc).
Search down the "percentile" column until you encounter 25% as an entry, then sum a number in the same row from a different column with each 25% entry you find.
I attached a spread. On the data tab, I have 2 criteria that I would like to use to move rows to another sheet. Columns U and W. An example would be that all rows that have a coil in Bay "B" and are allocated would go on the "B Allocated" sheet. I would also like this to automatically update when I delete the data in the data sheet and put new data in.
I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):
A sku 3102-0400-100000 3102-0400-200000 3102-0500-100000 3102-0500-200000 3102-0600-100000 3102-0600-200000 3102-0700-100000 3102-0700-200000
I need to delete every row in which column A includes the text "200000".
Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.
I have a spreadsheet which contains data for crime incidents occurring in a month. I have created a worksheet which uses "IF" statements to pull in data that occurred within the last 24 hours only. I would like to create a report that can be printed which has a crime category and lists all the incidents for that category below that occurred during the day. The issue I am having is that all "IF" and "LOOKUP" statements are line for line and I want to be able to skip blanks or where it is not the category in the title.
I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".
Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.
I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row
Code below
Sub deleterows() Dim i As Integer Dim intCounter As Integer Dim strLocation() As String
p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
I'm trying to fix a report that I created but can't seem to figure out a way to display the information for a single student.
I've attached a mock report up so that maybe it would make more sense.
So the first tab, 'DIR', I managed to find a way to pull up only the information for a single student that was selected in the drop-down D1 cell. For that I used a simple INDEX/MATCH combo. The student's name would only appear once in the 'Paste DIR' tab, so it was fairly simple to create these formulas.
Now for the 'Paste Outreach' tab, a student appears multiple times in the chunk of information. Right now, the way that I have the report is so that it would just pull the information from each row, regardless of the student. What I would like to do is find a formula similar to INDEX/MATCH, but find every instance when the criteria is met for the INDEX/MATCH. I would like to be able to log each instance a student has an Outreach log entered. Then if I switch the student selected in D1 of the DIR tab, then it would only populate their Outreach Logs.
So if Student Name & Outreach # matches D1 ('DIR' tab) & "90" in "Paste Outreach, then pull row info into rows 7-11 in Outreach. Find the next instance Name & # matches, and pull that into rows 12-16, etc.
I have a spreadsheet that is set out to look similar to a MS Project plan, with dates across the top, users in column A and Assignments in column B. In the corresponding cell that matches the user, date and assignment they will enter the number of hours they anticipate working on the assignment.
I then have a summary sheet that covers all assignments, week ending dates and users. I want to be able to calculate the hours and copy it into the cell in the summary sheet that matches the Day, User and Assignment. I have tried using SUMIF, but this requires the criteria cells to all be in columns, but with this sheet the dates are in a row.
I have built the following code which should look through a data sheet and then work out the instances where it meets the following criterias:
= "Client A" = "First letter of surname is "a"
The code is as follows:
Public rowcn Sub compare() Dim rngTemp As Range Dim intCounter As Integer loop_col = "Client A" data_sheet = "Data" target_sheet = "Summary" rowcn = 2 Do.............................
Aim - Extract every word after: and before , and put them in the appropriate headings
I have attached my desired results in column B - E. To calculate the answer, the heading of the tile is normally just before the : Meaning the Answer is after the : and before the ,
I have a spreadsheet that has employee name and average hours worked.. The employee is listed multiple times because each row represents a pay period with number of hours worked. the last column I used to average the hours worked. So what I need is whenever there is a value greater than 30 in column g, I need to copy the row where column G has a value. It can be copied on the same sheet or on another.
I am trying to use this function to figure out averages for tests. there can be up to 25 tests in the sheet which is where the "YES" comes in. If the test booklet was used for this class then YES will be placed in the cell in field B2:B26.
Now thes issue I'm having is that the formula is doing the math for the fields C2:C26 if there is a number in them if there is even if it does not say YES in the B2:B26 field.
I have a list of items (TR Sets) from 1 to 96 in the range B4:B99, with values corresponding to each one (Acid Number) in the range C4:C99. I would like to make a separate list that names each TR Set (using numbers 1-96) that has an Acid Number > 0.1 . Is there a formula to do this?
I need to sum a column when the quantities meet two criteria. The name in one column, and the date in another column. Probably an easy formula, but new at this and having trouble.
I want to make a function that gets the range like. "A1:B9" And this function automatically gets the range when given criteria meet.
For example: I have a cell A1 with value 0 and next 0 value in cell A10. I want to put that function in C1. So this function returns me the range like " A1:B9"
I need a formula that will tell me if EITHER two cells = a text word. I've tried a few things and can't seem to get it to work!!!!
See in the example of my spreadsheet below: If A2 = FALSE or B2 = FALSE then D2 should display "Allowed" if either are TRUE D2 should display "Not Allowed"
Is this possible!?!?! I've tried way to many different formulas and am close to giving up..
I need to extract key cell info from a master list when one of the cells meets a certain criteria.
Example: Each row of the main sheet represents a Purchase Order with columns A-M each containing text, numeric, or currency values regarding that PO. Column F represents a 4-digit activity code that defines exactly what was purchased. If the activity code for a row is in the 1000 series (1000 -1099) I need to assign info from 3 other columns (say B, E, &G) to a subsequent sheet for tracking.
My limited Excel-o-vision has built this: (sheet 1 represented as FY10) =IF(AND('FY10!F4>=1000,'FY10'!F4
