I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):
A
sku
3102-0400-100000
3102-0400-200000
3102-0500-100000
3102-0500-200000
3102-0600-100000
3102-0600-200000
3102-0700-100000
3102-0700-200000
I need to delete every row in which column A includes the text "200000".
Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.
I have a file with many intercompany transactions. There is a range of business unit numbers that if anyone one number is in both Column B "Bus Unit" and Column E "Affiliate" I want the row deleted.
Please see the attached, it is more clear I hope. The two yellow rows would be deleted. The list of business units that I would want to never be on the same row is "4, 7, 41, 44, 46, 51"
I am looking for an Excel VBA code that can delete pair of rows that has certain criteria. I have included an example in the attachment and highlighted the rows that should be deleted. Since the values in each coloumn is going to change every day , I am looking for a dynamic code.
The objective is to:
To delete rows that has same code (columnd D), same basis (coloumn E), same Effective (coloumn H), value of TT (Column J) is either TI or TO and has offsetting Amounts (L) ie the sume becomes zero. Example pair of row 7 and row 8 as well as pair of row 12 and row 13 should be deleted.
TO and TI are actually transfer in and transfer out. Since the TI and TO for these rows make the amount zero for same code and same basis on the same effective date, I do not want to include this in the spreadsheet.
I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row
Code below
Sub deleterows() Dim i As Integer Dim intCounter As Integer Dim strLocation() As String
p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count
need a formula to calculate the total number of x's in one column (column B, C, E are training types= x) where the corresponding column date falls within a date range. It’s to total each type of training done for each month. I have 3 training type columns and a cell that calculates the total number of trainings for the each month:=COUNTIF(F2:F100,">="&DATE(2008,2,1))-COUNTIF(F3:F200,">="&DATE(2008,2,31)). So now I just need it broken down by training type per month. How many x's in each column for February as an example.
I'm trying to apply an autofilter to do the ol' "delete visible lines that meet criteria" trick. Unfortunately my vb macro, although applying the string correctly, hides all of the lines...
This is the part of code relevant to filtering (i'm trying to filter on column M which is 13):
I am looking for a formula that either accepts the number in a cell if the numbers on two other cells are "approved". In other words, I have on cell A1 my value to be tested. On cells A2 and A3 I have two numbers. On cell A4 I'm looking for a formula that copies the number on A1 if A2 is bigger then 0.25 and A3 is smaller then 0.35. In not, there's no copy or a N/A appears.
I have a filtered list of data expanded to "all" in each column. One column is "percentile" (25%, 50%, 75%, etc).
Search down the "percentile" column until you encounter 25% as an entry, then sum a number in the same row from a different column with each 25% entry you find.
I attached a spread. On the data tab, I have 2 criteria that I would like to use to move rows to another sheet. Columns U and W. An example would be that all rows that have a coil in Bay "B" and are allocated would go on the "B Allocated" sheet. I would also like this to automatically update when I delete the data in the data sheet and put new data in.
I would like to pull all rows and columns from a table and copy them to a separate sheet. I would like to pull the data if a certain value is present in a particular column. Essentially, it is the same effect of filtering the data but I don't want to have to keep filtering and copying specific cells and pasting them into a different sheet if I need to change the raw data.
Example: I would like to copy all ids, store, and partner information IF the partner is "X". I would like to put this information in Sheet A.
I have a spreadsheet which contains data for crime incidents occurring in a month. I have created a worksheet which uses "IF" statements to pull in data that occurred within the last 24 hours only. I would like to create a report that can be printed which has a crime category and lists all the incidents for that category below that occurred during the day. The issue I am having is that all "IF" and "LOOKUP" statements are line for line and I want to be able to skip blanks or where it is not the category in the title.
I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".
Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.
I have a range of data and need to summarize some of the data. In the table below is an example of the data. I would like to have a single formula where I can count the number of rows where the end date - start date is < 14 days. I would prefer not to add an additional column for the datediff value. Is there a way to do this with either arrays or named ranges?
Name Start End Other data Verizon 1/10/2010 1/25/2010 AT&T 3/2/2010 4/14/2010
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
I want to be able to delete certain rows based on multiple criteria. If data in the row does not meat the crieteira, it shud be deleted. I have attached the excel file sample in which I want to keep the highlighed rows and detele the rest. Its base on Origin city and Destination city combination. Eg: If Origin city="A" and Destination City = "B", I want to keep the row. Like wise for all highlighted rows. but if the Origin City = "B" and Destination City = "U" I want to delete the row.
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
I'm working this spreadsheet and i want to automate of deleting the entire rows once the last two columns contains both Zero values. the worksheet cotains thousands of row to clean-up.
What I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
Is it posibile to make a macro that automaticaly delete rows based ona a condition. Condition is to delete rows that have B column value "" or zero. For example:....
I want to create a macro the will delete all the rows in a sheet if 1 of 2 conditions are met. The first condition is if a cell is blank or if a cell contains the word "negative"
how to delete duplicate rows except the first and the last rows using macro..
I have data like this and i want to delete those rows except the first and the last rows
31/10/2006 31/10/2006 31/10/2006 31/10/2006
I use the below macros from btadams posted 27th January 2003 but only for delete the last row
Sub DleteDups() Dim Cell As Range
Do While ActiveCell.Offset(1, 0) <> "" If ActiveCell.Value <> ActiveCell.Offset(1, 0).Value Then ActiveCell.Offset(1, 0).Select Else ActiveCell.EntireRow.Delete End If Loop End Sub
Sub DeleteBlankRowInColumnA() 'this macro scrolls down Column A if the cell is empty the row is deleted. Dim A As Integer A = 0 Do Until A = 142 If Range(0, "a1") = 0 Then Selection.Delete shift:=xlUp End If Loop
I have an Excel spreadsheet that is given to me weekly, but I'd like to remove repetitive and empty rows before presenting it to someone. It is set up like this:
Row 1, A1, contains the word Project. Row 2 is blank Row 3 is blank Row 4 is blank Row 5, A5, contains the word Organization. Row 6 is blank Row 7, A7, contains a 6-digit number starting with 3. Row 8 is blank
(all of the above starts over again (loops) approximately 30 times) The final row contains the phrase "Grand Total"
*Row 5 is repetitive and is not required. I'd like to delete it.
I have too many empty columns. Getting rid of them (and Row 5) would greatly shorten my spreadsheet. I am aiming for: Project 301111
Here is the problem: i have two conditions to satisfy first is data from column A and second is data from column C, what i wanted to do is if both data from column A and B has the same other data in column A and C then sum the total in column D, F, I retain data for column B, E, G and H. Then delete the duplicate rows. By the way we also need to replace the remove the text (W1,W2,W3,W4 and W5) in column C.
I have a worksheet with part numbers, and I want to delete all the rows with part numbers matching a part number in another workbook (I could import the list into the part number workbook in a new sheet if it makes it easier). The part numbers in the other worksheet would be in column A.
I would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
