Receiving Error In Code "unable To Get The Find Property Of The Range Class"
Apr 26, 2006
I am receiving the error "unable to get the find property of the range class" in my code. I have attached my code and highlighted red where my error is occuring.
On Error Goto ProductionRptEngineListExport_Error
Dim objWrkTmp As Excel.Workbook
Dim ObjWrkshtActive As Excel.Worksheet
Dim objWrkshtTmp As Excel.Worksheet
Dim RngStart As Excel.Range
Dim CurrentRowNum As Long, RowCnt As Long
Dim GroupRowNum As Long, ColCnt As Long
Dim chtChart As Excel. chart
Dim intwrktmp As Integer, intwrktmpTot As Integer, intLastRow As Long
Dim sngwrk As Single
ctlStatus = "Opening Production Report..."
DoEvents........................................
I am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code: Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then If Range("B3").Value = 0 Then Columns("G:P").EntireColumn.Hidden = True Else If Range("B3").Value = 1 Then Columns("H:P").EntireColumn.Hidden = True
Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.
Sheets(" Book Query").Range("A6:I6").Select Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select Selection.SpecialCells(xlsCellTypeVisible).Select Selection.Copy Sheets("Inventories and Variances").Select Sheets("Inventories and Variances").Range("A7").Select
I use Excel 2010 andexample.xlsx cannot make my code working because of the so famous errore above.
I have several pivot tables (pt) in different worksheets (ws), and a list of items stored in an array I created. I've written a macro for setting ON all items in pt except those ones in the array (listOffnet within the code). Everything works properly.
Now, I would like to do the complementary action: setting OFF all items that are not in the array. Unfortunately, I get the error at line:
I am getting the following error when i am clicking a Button on sheet1 which is generating duplicate of sheet1.I am trying to delete the button when duplicate is created..Error is:" run-time error '1004' Unable to get the buttons property of the worksheet class" at this line in code"ActiveSheet.Buttons("CmdHistory").Delete"
I protect the Sheet1 Review > protect sheet and selected two checkboxes from protect sheet property "Select locked Cell" and "Select unlocked cells".
It is working fine and it does not allow the user to view the locked cells B17:B24 while protection is on.
I have a RadioButton1 on the same Sheet1 and i put the following code behind the button to hide the 4 up to 10 rows. When i will press the button while password protection is on; it is giving me the following error:
Unable to set the Hidden property of the Range class.
I keep getting that error when I'm running my macro. When I debug, it points me to the bolded line in the code below. The larger macro I'm running this function in runs this function some 101 times without error before this happens.
The values of the parameters are as follows when it gives me the error: Find_Exact("hchen", ws1, "B:B"). The first parameter is the only one that changes in the previously mentioned running of this function.
Code: Sub LockByColor() ActiveSheet.Unprotect "pc" Dim cl As Range For Each cl In Range("$BO$1:$BZ$45") If cl.Interior.Color = 6299648 Then cl.Locked = True Else: cl.Locked = False End If Next cl ActiveSheet.Protect "pc" End Sub
Sheets("PRODUCTIVITY").Select Range("A20").Select Range(Selection, Selection.End(xlToRight)).Select Range(Selection, Selection.End(xlToRight)).Select Range(Selection, Selection.End(xlDown)).Select Range(Selection, Selection.End(xlDown)).Select With Selection .Locked = False (***debug screen is highlighting this line***) .FormulaHidden = False .ClearContents End With Range("A20").Select ActiveCell.FormulaR1C1 = "PASTE NEW DATA HERE" Range("A20").Select
This worksheet was built for use of many users so this sheet is PROTECTED. The user is instructed to copy/paste information from our internal web into the selected areas in the worksheet. When i UNPROTECT the worksheet the VBA works fine.
The data in the worksheet spans from columns A to P, and the length (# of records) is variable.
I am using the below code to unloock certain columns based upon a value in cell a1. The value is the previosu month end date. It was working, but now I am getting " run-time error 1004 Unable to set the locked property of the range class" Can anyone help me to fix the error.
Sub UnlockMe() Dim cl As Range ActiveSheet. Unprotect "password" For Each cl In Range("$B$1:$M$1") If cl = [a1] Then cl.EntireColumn.Locked = False cl.EntireColumn.Interior.ColorIndex = 6 Else cl.EntireColumn.Locked = True cl.EntireColumn.Interior.ColorIndex = xlNone End If Next cl ActiveSheet.Protect "password" End Sub
Code: Private Sub ComboBox1_Change() ActiveSheet.Rows("3:62").Hidden = False Range("D1").Value = ComboBox1.Text End Sub
I get a runtime error '1004' when I make my combo box selection. I don't have any security or password protection type stuff. The combo box is part of a more complicated spreadsheet and I don't want to switch to a data validation type drop down and I really want it to be activeX.
I have recently tried to implement the password protect from viewing code from this site. It worked brilliant on a basic spreadsheet, but when I tried to implement it on a worksheet with links I keep getting the error:
Run-time error '1004' Unable to set the hidden property of the Range class
I'm looking to loop a comparison code. I'm using dynamic referencing (using x and y) to find maximum values for specific time intervals. The code works on a cell to cell basis, meaning if I input the formula and change the cell referencing manually then the equation will give the desired results. However when I attempted to create a VBA code to speed up the process I kept getting a 1004 Unable to set FormulaArray Property of the Range Class error, I later figured out that the Formula Array function is limited to a certain number of characters so I split up my function into 3 different string formulas. I still get the same error.
I have created quite a nice little macro that; drills through a lot of key figures, updates a pivot chart and copies the chart to powerpoint.
However it crashes on one particular data set every time with this error: Run-time error '1004': Unable to set the _Default property of the pivot item class
The code where the debugger stops is the last line below here.
I can manually change the pivot chart to the keyfigure it crashes on and thereby workaround the problem in the macro. Also it works for more than 50 other keyfigures without problems.
I'm trying to unhide all the cells in a worksheet, but keep getting the "Unable to set the Hidden property of the Range class" error and I'm not sure what to do.
I am having trouble with a macro for unprotecting a sheet keeping specific cells locked then clearing contents of other cells then reproect the sheet. I wrote one for one sheet which works and I have re used this but it keeps saying Unable to set the Locked property of the Range class.
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv) If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
I've been using the following code successfully for years. Today I would get the error 1004:Unable to set the visible property of the worksheet class. All my searches came up with someone not realizing they had protected the workbook. As you can see, the first thing I do before trying to set the worksheet visible is to unprotect the workbook. In frustration and on a lark I tried .Sheets("items").Visible = True and it worked. These kind of intermittent errors in Excel VBA are very frustrating. Can anyone tell me what I am doing wrong?
I am trying to look at column at of two different workBOOKS and then when a match is found take the value from column D in workbook two and copy it to the corresponding row in the current column of workbook one.
this is the code I'm using and I get that unable to get the vlookup function. I thought maybe it was because not all of them will have matches so it could return an error if it is trying to return empty, so I put int on error resume next, and it ran through but never brought over ANY data, and there ARE matches and data to be brought over.
destRng is the range in the current column(that i just inserted) on the active worksheet that we will be putting the new info into. srcRng is the range in column A on the other workbook that the numbers are being compared to. src is just an integer
However am receiving an error: "Unable to set the Weight Property of the Border Class". The odd thing is, I only receive the error on the following 2 lines:
The sheet is not protected, events are disabled, and the range that gets selected changes dynamically based on the number of rows of data in the table, however in this example cells A3:L15 are selected.
I made a macro to plot several line graphs on two axis (up to 5) side by side. I made the macro open up the files i need, and extract the necessary data into a common workbook. I put the common element, time as the x axis and heat as one y axis and pressure as the secondary axis. The source data on the excel worksheet is as follows:
(column A = time; column b = heat1; column c = pressure1, column d= heat2; and so on.
So when i have 3 workbooks i need to compare, it should have 6 lines. 3 sources work fine, but 2 sources gives me the "Unable to set the AxisGroup Property of the series class" error message.
I have been working on this small project and I it works to create checkboxes and check what boxes are checked. However, at the end of checking which boxes are checked there is a pop up error message saying Run-Time error '1004': Unable to get the CheckBoxes property of the Worksheet class. These are the lines of code, where is the error?
Sub IsBoxChecked() Dim titles(200) As String Dim wks As Worksheet
Set rng = Range("I:I") LR = ActiveSheet.Cells(Rows.count, "I").End(xlUp).Row + 2 Range("I" & LR).Value = Application.WorksheetFunction.Sum(rng) Range("I" & LR).NumberFormat = "#,##0"
and from what I've read on google the .SUM(rng) need to be set to a range, but isn't it already a range? I tried plugging in there Range("I:I") for rng and that didn't work either.
I'm trying to add the xvalues, but I get an error that says "Unable to set XValues property of Series Class"
Set buildSeries = ws.Cells(6, 2) For k = 4 To Col Step 2 Set buildSeries = Union(buildSeries, ws.Cells(6, k)) Next k ActiveChart.SeriesCollection(1).XValues = buildSeries
I am having trouble with IsError function consistently catching errors in my call to the Search worksheetfunction. For example, here is a snippet of my code that works just fine:
