Excel 2010 :: Error 1004 - Unable To Set Visible Property Of Pivotitem Class

Jul 10, 2014

I use Excel 2010 andexample.xlsx cannot make my code working because of the so famous errore above.

I have several pivot tables (pt) in different worksheets (ws), and a list of items stored in an array I created. I've written a macro for setting ON all items in pt except those ones in the array (listOffnet within the code). Everything works properly.

Now, I would like to do the complementary action: setting OFF all items that are not in the array. Unfortunately, I get the error at line:

[Code]....

View 1 Replies


ADVERTISEMENT

Excel 2010 :: Runtime Error 1004 / Unable To Set Hidden Property Of Range Class

Jun 25, 2013

I am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".

I am using excel 2010 x64.

Code:
Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then
If Range("B3").Value = 0 Then
Columns("G:P").EntireColumn.Hidden = True
Else
If Range("B3").Value = 1 Then
Columns("H:P").EntireColumn.Hidden = True

[code]....

View 3 Replies View Related

Run-time Error '1004': "Unable To Get The Buttons Property Of The Worksheet Class

Feb 24, 2010

I am getting the following error when i am clicking a Button on sheet1 which is generating duplicate of sheet1.I am trying to delete the button when duplicate is created..Error is:" run-time error '1004' Unable to get the buttons property of the worksheet class" at this line in code"ActiveSheet.Buttons("CmdHistory").Delete"

View 2 Replies View Related

Excel 2010 :: Unable To Get Mode Property Of WorksheetFunction Class

May 3, 2013

If I type in the VBA Editor immediate window

Code:
?application.WorksheetFunction.average(array(1,3))

I get the expected answer of 2, but

Code:
?application.WorksheetFunction.mode(array(1,3))

produces a pop up error of:"Unable to get the Mode property of the WorksheetFunction Class"

(Excel 2010 on 64 bit machine)

View 2 Replies View Related

Unable To Set The Visible Property Of The Worksheet Class

Jan 6, 2009

I've been using the following code successfully for years. Today I would get the error 1004:Unable to set the visible property of the worksheet class. All my searches came up with someone not realizing they had protected the workbook. As you can see, the first thing I do before trying to set the worksheet visible is to unprotect the workbook. In frustration and on a lark I tried .Sheets("items").Visible = True and it worked. These kind of intermittent errors in Excel VBA are very frustrating. Can anyone tell me what I am doing wrong?

View 6 Replies View Related

Workbook Protection - Unable To Set Visible Property Of Worksheet Class

Dec 26, 2013

I am having problems with some vba codes when I protect my workbook; 'I get an run-time error 1004 Unable to set visible property of the worksheet class'

The code I am trying is:

Sub Stats1_Return_TextBox1_Click()
ActiveSheet.Unprotect "meme"
Application.Goto Worksheets("BCM Database").Range("L15")
Sheets("Stats 1").Visible = False
ActiveSheet.Protect "meme"

End Sub

How to sort this. One more question is there away of protecting you vba code? stop users being able to view or edit them for instance?

View 4 Replies View Related

Runtime Error 1004 Unable To Set Locked Property?

Oct 27, 2011

I have a sub that I have copied out of a previous workbook where it still works fine. In the previous workbook it was assigned to a button. Now I am trying just to do it as an automatic action when the workbook is closed

It will lock any cell within the specified range that is not blank then protect the worksheet, save the workbook then save a dated archive copy

When I pasted it in to a new workbook I changed the range to A1:AP49 and strFileName

Now when I run it now I get an Error 1004 - Unable to set the Locked property of the Range class.

On Debug this line is highlighted:-
c.Locked = c.Value ""

The full code is:-

Private Sub Workbook_BeforeClose(Cancel As Boolean)
'
' Lock_cells Macro
' Macro compiled 10/26/2011 by G CARNCROSS

' Locks used cells, saves the workbook then saves a password protected copy with the days date in the file name then closes the workbook
'
'
ActiveSheet.Unprotect Password:="SHES"[code].....

View 2 Replies View Related

Error 1004 Dget Property From Worksheet Function Class

Jul 18, 2007

I've noticed error 1004 is very broad and switches its name depending on what you're working with. But I have no idea what it means.

This is the line w/ probs:

Sheeti.Cells(y, 2).Value = WorksheetFunction.DGet(InventoryRange, 3, CriteriaRange)

I looked at protection and Macro security and checked my definitions (that work in other contexts).

Does DGET need to have criteria and database in the same worksheet? My project is working between two workbooks.

View 6 Replies View Related

Excel 2010 :: Runtime Error 1004 - Autofill Method Of Range Class Failed

Jul 31, 2014

The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.

Code:
Sub colfrmadd()
Range("A1").CurrentRegion.Select
colcnt2 = Selection.Columns.Count

[Code]....

View 1 Replies View Related

Specialcells Property Error "Unable To Get The SpecialCells Property Of The Range Class"

Apr 14, 2007

Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.

Sheets(" Book Query").Range("A6:I6").Select
Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlsCellTypeVisible).Select
Selection.Copy
Sheets("Inventories and Variances").Select
Sheets("Inventories and Variances").Range("A7").Select

View 2 Replies View Related

Pivot Chart Error: Unable To Set The _Default Property Of The Pivot Item Class

Aug 15, 2006

I have created quite a nice little macro that;
drills through a lot of key figures, updates a pivot chart and copies the chart to powerpoint.

However it crashes on one particular data set every time with this error:
Run-time error '1004':
Unable to set the _Default property of the pivot item class

The code where the debugger stops is the last line below here.

lngKpi = Sheets("Helpfile"). Cells(lngRow, 2)
Sheets("Charts").Select
ActiveSheet.ChartObjects("DK").Activate
ActiveChart.PivotLayout.PivotTable.PivotFields("KPI # (overall").CurrentPage = lngKpi

I can manually change the pivot chart to the keyfigure it crashes on and thereby workaround the problem in the macro. Also it works for more than 50 other keyfigures without problems.

View 9 Replies View Related

Receiving Error In Code "unable To Get The Find Property Of The Range Class"

Apr 26, 2006

I am receiving the error "unable to get the find property of the range class" in my code. I have attached my code and highlighted red where my error is occuring.

On Error Goto ProductionRptEngineListExport_Error
Dim objWrkTmp As Excel.Workbook
Dim ObjWrkshtActive As Excel.Worksheet
Dim objWrkshtTmp As Excel.Worksheet
Dim RngStart As Excel.Range
Dim CurrentRowNum As Long, RowCnt As Long
Dim GroupRowNum As Long, ColCnt As Long
Dim chtChart As Excel. chart
Dim intwrktmp As Integer, intwrktmpTot As Integer, intLastRow As Long
Dim sngwrk As Single

ctlStatus = "Opening Production Report..."
DoEvents........................................

View 2 Replies View Related

Worksheet.function Average Returning Error "Unable To Get The Average Property Of The WorksheetFunction Class"

Jan 23, 2007

TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)

The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.

View 3 Replies View Related

Unable To Set Hidden Property Of Range Class

Mar 19, 2014

I locked the cells on Sheet1 from B4 to B10.

I protect the Sheet1 Review > protect sheet and selected two checkboxes from protect sheet property "Select locked Cell" and "Select unlocked cells".

It is working fine and it does not allow the user to view the locked cells B17:B24 while protection is on.

I have a RadioButton1 on the same Sheet1 and i put the following code behind the button to hide the 4 up to 10 rows. When i will press the button while password protection is on; it is giving me the following error:

Unable to set the Hidden property of the Range class.

View 7 Replies View Related

Unable To Get The FindNext Property Of The Range Class

Jun 26, 2009

I keep getting that error when I'm running my macro. When I debug, it points me to the bolded line in the code below. The larger macro I'm running this function in runs this function some 101 times without error before this happens.

The values of the parameters are as follows when it gives me the error:
Find_Exact("hchen", ws1, "B:B"). The first parameter is the only one that changes in the previously mentioned running of this function.

View 4 Replies View Related

Unable To Get The VLookup Property Of The WorksheetFunction Class...

Dec 4, 2009

I am trying to look at column at of two different workBOOKS and then when a match is found take the value from column D in workbook two and copy it to the corresponding row in the current column of workbook one.

this is the code I'm using and I get that unable to get the vlookup function. I thought maybe it was because not all of them will have matches so it could return an error if it is trying to return empty, so I put int on error resume next, and it ran through but never brought over ANY data, and there ARE matches and data to be brought over.

destRng is the range in the current column(that i just inserted) on the active worksheet that we will be putting the new info into. srcRng is the range in column A on the other workbook that the numbers are being compared to. src is just an integer

View 14 Replies View Related

Unable To Set Weight Property Of Border Class

Apr 22, 2010

I am using the following few lines of code:

Code:

Range("A3:L" & ActiveCell.Offset(1, 0).Row).Select
With Selection

.Borders(xlEdgeLeft).Weight = xlMedium
.Borders(xlEdgeTop).Weight = xlMedium
.Borders(xlEdgeBottom).Weight = xlMedium
.Borders(xlEdgeRight).Weight = xlMedium
.Borders(xlInsideVertical).Weight = xlThin
.Borders(xlInsideHorizontal).Weight = xlThin

End With

However am receiving an error: "Unable to set the Weight Property of the Border Class". The odd thing is, I only receive the error on the following 2 lines:

Code:

.Borders(xlEdgeBottom).Weight = xlMedium
'and
.Borders(xlInsideHorizontal).Weight = xlThin

The sheet is not protected, events are disabled, and the range that gets selected changes dynamically based on the number of rows of data in the table, however in this example cells A3:L15 are selected.

View 9 Replies View Related

Unable To Set AxisGroup Property Of Series Class

Dec 28, 2011

I made a macro to plot several line graphs on two axis (up to 5) side by side. I made the macro open up the files i need, and extract the necessary data into a common workbook. I put the common element, time as the x axis and heat as one y axis and pressure as the secondary axis. The source data on the excel worksheet is as follows:

(column A = time; column b = heat1; column c = pressure1, column d= heat2; and so on.

So when i have 3 workbooks i need to compare, it should have 6 lines. 3 sources work fine, but 2 sources gives me the "Unable to set the AxisGroup Property of the series class" error message.

Code:

Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1)).Select
Charts.Add
ActiveChart.ApplyCustomType ChartType:=xlBuiltIn, TypeName:= _
"Lines on 2 Axes"
ActiveChart.SetSourceData Source:=Sheets("Sheet1").Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1))

[Code]...

I don't get why it works for 3 but not 2 sources.

View 2 Replies View Related

Unable To Set Locked Property Of Range Class

May 1, 2014

The problem is coming from the Else statement.

Code:
Sub LockByColor()
ActiveSheet.Unprotect "pc"
Dim cl As Range
For Each cl In Range("$BO$1:$BZ$45")
If cl.Interior.Color = 6299648 Then
cl.Locked = True
Else: cl.Locked = False
End If
Next cl
ActiveSheet.Protect "pc"
End Sub

View 5 Replies View Related

Unable To Get CheckBoxes Property Of Worksheet Class

Jul 3, 2014

I have been working on this small project and I it works to create checkboxes and check what boxes are checked. However, at the end of checking which boxes are checked there is a pop up error message saying Run-Time error '1004': Unable to get the CheckBoxes property of the Worksheet class. These are the lines of code, where is the error?

Sub IsBoxChecked()
Dim titles(200) As String
Dim wks As Worksheet

[Code]....

View 5 Replies View Related

Unable To Get The Correl Property Of The Worksheetfunction Class

May 22, 2007

I get the "Unable to get the Correl Property of the worksheetfunction class" Error when I try to run the following code

CurrentRow = 2
CurrentColumn = 2
Finalrow = 5
WS2 = Sheet2
Finalrow2 = 5
Num_Records = 4

Correlation1 = Application.WorksheetFunction.Correl(Range(Cells(CurrentRow, CurrentColumn) & ":" & Cells(Finalrow, CurrentColumn)), WS2.Range("B" & Finalrow2 - Num_Records + 1 & ":B" & Finalrow2

View 9 Replies View Related

Unable To The Locked Property Of The Range Class

Sep 22, 2008

Sheets("PRODUCTIVITY").Select
Range("A20").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlDown)).Select
With Selection
.Locked = False (***debug screen is highlighting this line***)
.FormulaHidden = False
.ClearContents
End With
Range("A20").Select
ActiveCell.FormulaR1C1 = "PASTE NEW DATA HERE"
Range("A20").Select

This worksheet was built for use of many users so this sheet is PROTECTED.
The user is instructed to copy/paste information from our internal web into the selected areas in the worksheet.
When i UNPROTECT the worksheet the VBA works fine.

The data in the worksheet spans from columns A to P, and the length (# of records) is variable.

View 9 Replies View Related

Unable To Get The Sum Property Of The Worksheet Function Class

Jan 19, 2009

Here is the code that generates the error:

Set rng = Range("I:I")
LR = ActiveSheet.Cells(Rows.count, "I").End(xlUp).Row + 2
Range("I" & LR).Value = Application.WorksheetFunction.Sum(rng)
Range("I" & LR).NumberFormat = "#,##0"

and from what I've read on google the .SUM(rng) need to be set to a range, but isn't it already a range? I tried plugging in there Range("I:I") for rng and that didn't work either.

View 9 Replies View Related

Unable To Set XValues Property Of Series Class

Feb 19, 2009

I'm trying to add the xvalues, but I get an error that says "Unable to set XValues property of Series Class"

Set buildSeries = ws.Cells(6, 2)
For k = 4 To Col Step 2
Set buildSeries = Union(buildSeries, ws.Cells(6, k))
Next k
ActiveChart.SeriesCollection(1).XValues = buildSeries

View 9 Replies View Related

Unable To Get The Search Property Of The WorksheetFunction Class

Feb 23, 2009

I am having trouble with IsError function consistently catching errors in my call to the Search worksheetfunction. For example, here is a snippet of my code that works just fine:

Code: .....

View 9 Replies View Related

Unable To Get The Find Property Of The Range Class?

Apr 27, 2003

When I try and run my macro I keep getting an error message saying Unable to get the Find Property of the Range Class and it refers me to:

TeamRef = Worksheets("Info Reference").Range("A3:A120").Find(What:=strFind1, After:=Worksheets("Info Reference"), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False).Address

View 4 Replies View Related

Unable To Set The Formula Property Of The Series Class

Jul 14, 2006

I am struggling with one problem. I am trying to change formulae of series in a chart using VBA code given below. But I am getting

'Runtime Error 1004, Unable to set the formula property of the series class'

ActiveChart.SeriesCollection(1).Formula = _
Replace(ActiveChart.SeriesCollection(1).Formula, "Sheet1", "test")

View 4 Replies View Related

Unable To Get The Vlookup Property Of The WorksheetFunction Class ..

Jan 4, 2007

I have a UserForm with one ComboBox and one TextBox. The ComboBox is populated from another sheet with product codes in Col A and names in Col B. When the user selects a product code from the ComboBox the respective name appears in the adjacent TextBox. Once both boxes have been filled the user can then save the data to a third sheet. Now the problem arises when the user tries to manually enter a code into the ComboBox that does not appear in its rowsource - VBA states a run-time error and my new keyboard goes flying out the window again. Attached is an example sheet

View 4 Replies View Related

Unable To Set The Locked Property Of The Range Class

Jul 17, 2007

I am using the below code to unloock certain columns based upon a value in cell a1. The value is the previosu month end date. It was working, but now I am getting " run-time error 1004 Unable to set the locked property of the range class" Can anyone help me to fix the error.

Sub UnlockMe()
Dim cl As Range
ActiveSheet. Unprotect "password"
For Each cl In Range("$B$1:$M$1")
If cl = [a1] Then
cl.EntireColumn.Locked = False
cl.EntireColumn.Interior.ColorIndex = 6
Else
cl.EntireColumn.Locked = True
cl.EntireColumn.Interior.ColorIndex = xlNone
End If
Next cl
ActiveSheet.Protect "password"
End Sub

View 2 Replies View Related

Unable To Set The Xvalues Property Of The Series Class

Sep 19, 2007

For the last day I have been getting the following error: "Run-time error '1004': Unable to set the Xvalues property of the series class."

The archetecture of the marco is sound being that I have used this methology in another macro and it works correctly every time. The XValuesand Values range are also correct and I know this because I had the macro select the data cells and it does this correctly as well. The data for simplicity at the moment has no empty cells or abnormal data. The data cells are all filled with some kind of data. For the XValue Range the data would look something like "2070087 4/27/2007" and the Values range is filled with a number between 0 and 100. What I can't figure out is why it crashes with a valid establish range. I highlighted the lines it crashes on in read, they are near the bottom.

Sub Proto1()
'
' Proto1 Macro
' Macro recorded 8/30/2007 by aaron.verellen
'

'
Dim CurrentSheet As String, ChartName As String
Dim RowCount As Integer, ColumnCount As Integer, FirstColumn As Integer, LastColumn, _
FirstRow As Integer, LastRow As Integer, Row As Integer, Column As Integer, _
ProductColumn As Integer, ArrayIndex As Integer, ParameterCount As Integer, _
ItemCount As Integer, MyIndex As Integer
Dim UserProductFlag As Boolean, NewProductFlag As Boolean
Dim Possibilities() As String
Dim ProductXRange As Range, ProductYRange As Range .................

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved