I was looking at the other posts and this should work. Why the bleep can't I get the MROUND function to work. Simple scenario...I need to round UP numbers to the nearest 50. 320 should bring back 350, 351 should bring back 400.
For example, if this is in cell A1, I think the formula should be =MROUND(A1,50). Yet everytime I use the function, it gives me NAME#.
I have excel 2003. I'm working on a weight lifting program and need to have cells round to the nearest 0 or 5. My problem is that the cells I need to round already have a formula in them and I can't get the cell to round the answer of the formula.
D17=U4*.6
I need the answer to be rounded to the nearest 0 or 5.
I wish to apply a rounding rule that will correctly round up or down to the nearest 5 or 0.
I tried using ceiling and floor and am almost there, but not quite.
Rule is to round up or down to nearest 5 or 0
originalplancfcheckroundedrulewill use
634should be 630635630f634
634.4should be 630635630f6343f
634.5should be 635635630c6352c
634.6should be 635635630c6352c
635should be 635635635c Or f6351f
635.1should be 635640635f6351f
635.5should be 640640635c6364c ...............
I have downloaded a punch in time clock from another user " Alex17", great job by the way. I was wondering on how to apply some certain rules this. I would need the times to round to the nearest quarter. Let's say someone punched in @8:01AM or any time up to 8:07AM, I would need it to round to 8:00AM, if they punched in from 8:08AM up to anytime to 8:14Am, I would need that to round to 8:15AM or if someone punched in @ 8:23AM it would round to 8:30AM....etc. I attached the form.
I need these rules to apply
7:00 - 7:07 round down to 7
7:08 - 7:15 round up to 7:15
7:16 - 7:22 round down to 7:15
7:23 - 7:30 round up to 7:30
7:31 - 7:37 round down to 7:30
7:38 - 7:45 round up to 7:45
7:46 - 7:52 round down to 7:45
7:53 - 8:00 round up to 8
or if this makes more sense
7:00 - 7:07 round down to 7
7:08 - 7:15 round up to 7.25
7:16 - 7:22 round down to 7.25
7:23 - 7:30 round up to 7.5
7:31 - 7:37 round down to 7.5
7:38 - 7:45 round up to 7.75
7:46 - 7:52 round down to 7.75
7:53 - 8:00 round up to 8
I write up job cards that require measurements in fraction form. Usually whenever i want to round off a figure , say 10/16, to 5/8, i right click on the figure and format cell it. However, this can be quite time consuming if there are multiple cells and are of a different breakdown.
What i would like to know if there's a shortcut way where when the 10/16 is in the cell, it automatically rounds off to the nearest fraction.
How do I round $452.57 in cell A1 to $453.00? I want to format the cells to round to the nearest dollar and leave the .00 cents.
View 9 Replies View RelatedIn cell A1, I might have the following numbers: 1, 5, 10, 50, 100.
In cell B1, I will have an unknown number
In cell C1, I want to round the number in B1 using the information given in A1.
For example:
A1 = 1
B1 = 153.45
C1 should be 153
C1 = round(B1,0)
A1 = 5
B1 = 153.45
C1 should be 155
C1 = round(B1,0) +/- 5 (depending on the situation)
A1 = 10
B1 = 153.45
C1 should be 150
C1 = round(B1,-1)
A1 = 50
B1 = 153.45
C1 should be 150
C1 = round(B1,-1) +/- 50 (depending on the situation)
Is there a quick of doing this using VB? I can do a bunch of if then statements... but was wondering if there's an easier way.
I am trying to round a number down to the nearest 1/4". For example;
Round Down 8.80" to 8.75".
Is there any combination of Rounddown and Mround that will accomplish this?
I have an overtime spreadsheet where I calculate how mush I'm paying on vouchers, as they only come in lots to £5.00 I want to round the figure to the nearset £5.00, doesn't really matter if I overpay as it will even out next time, what's a basic forumula to work this out?
View 6 Replies View RelatedI need to round, up or down, dollar figures to the nearest .x9 cents. Examples:
$4.32 = $4.29
$5.55 = $5.59
$3.07 = $3.09
$5.00 = $4.99
I have a cell that returns a value...lets say "439". I need the cell to automatically round the number up to the nearest 25th. Like this:
439 would become 450
521 would become 525
551 would become 575
Need best method to round the value up or down to the nearest 5¢.
I have to do this to upgrade my budgetting spreadsheet's shopping list due to our government discarding the 1¢ and 2¢ coins
I must admit I really don't even know how to round only the cents of the value which is all I really all I want to do I spose, isn't it
I don't really understant the MSexcel's ROUND function instructions and can only round the integer not the ?float? part Can you help MrEXCEL
EG: RoundedOK.??¢ where all I want to round is the .
What formula could I use to round up or down time values to the nearest 6 minute increment?
Example:
Time ----> Rounded To
5:02 PM --> 5:00 PM
5:03 PM --> 5:06 PM
4:18 PM --> 4:18 PM
4:19 PM --> 4:18 PM
4:20 PM --> 4:18 PM
4:21 PM --> 4:24 PM
etc.
We are trying to find the correct formula to round number to the nearest even number. In the attached example, 0.105 should round to 0.10 since the zero to the left of the five is even. If the problem was 0.115 then the answer would be 0.12 since the one to the left of the zero is odd.
I would like to round this number (3.5) to become 4, but by using this formula =CEILING(A1,0.5) the result will be 3.5
i need a formula that turns 3.5 to 4
when i use this formula =ROUND(A2,0.5), 3.5 becomes 4, but 3.2 becomes 3 not 3.5
i.e. a formula turns 3.2 to 3.5 and 3.5 to 4
I am trying to round similar to Banker's Rounding or Scientific Rounding but I can't find a consistent formula that works perfect with decimals.
Using three decimal places for all the samples, I can get 0.0785 to round to 0.078 but 0.1785 wants to round to 0.179 instead of staying 0.078. Or 0.0005 will round to 0 but 0.5115 wants to round to 0.511 instead of 0.512.
Here is a list of sample numbers along with desired results:
.0785 should be .078
.5115 should be .512
.5035 should be .504
.0005 should be 0
.0025 should be .002
.0194 should be .019
.0195 should be .02
.0135 should be .014
.0115 should be .012
.8115 should be .812
I cannot find a formula which gives me all of these results. Here is a list of the formulas I have tried so far (NOTE: cell A2 is the working cell in my worksheet where I enter the number to be rounded)
1) =MROUND(A2,0.001)
3) =ROUND(A2,3)
4) =IF(ISERROR(IF(MOD(MID(A2,4,1),2)=1,CEILING(A2,0.001),FLOOR(A2,0.001))),0,IF(MOD(MID(A2,4,1),2)=1,CEILING(A2,0.001),FLOO R(A2,0.001)))
5) =EVEN(A2)
6) =ROUNDUP(A2,3)
7) =ROUNDDOWN(A2,3)
I have a form to round to nearest quarter but if it is less than 1 hour I need it to round to a total of 1. Can this be combined in one formula.
I also need my time to be configured so that if the start time is a PM number then end time AM it does not figure right. is there a way to remove the AM/PM from time. I have already tried all the formats from number,time, & custom.
Attached is my form : Timesheet Form 2014.xlsx
I must be using hte wrong command or I am dumb.
Cell B8 I have a validation list of either Hub, Router, N/A
On cell C8 I want if (B8=Hub,3COM,0) but I get a NAME error. Is it because it won't work with letters but it can make the calculation?
IM USING VLOOKUP TO FIND a VALUE IN AN ADJACENT CELL, BUT IF THE VALUE ISNT LISTED THEN I WANT IT TO DO NOTHING. EXAMPLE
=VLOOKUP(1100,Tuesday!A:F,6)
BUT IF THERE IS NO 1100 TO LOOKUP THEN GIVE ME A 0 VALUE OR DO NOTHING
Sub testDateCompare()
Dim nmiDate As String
nmiDate = CDate("23/4/08")
Dim origDate As String
origDate = CDate("23/04/2008 15:05")
origDate = Left(origDate, InStr(origDate, " "))
Dim minDate As String
minDate = WorksheetFunction.Min(origDate, nmiDate)
MsgBox minDate
End Sub
Giving '400' error!?
I'm working on a spreadsheet and I want the letter "E" to have a numerical value of zero, and not necessarily in just place as my sheet will be regularly updated. If you're a fan of golf, you will understand what I am doing. I'm basically making a custom leader board for a fantasy golf game that I'm doing, and I'd like for the letter E to represent the value of zero when I am adding up the scores.
For example
A1: -1
A2: -3
A3: 4
A4: E
A5: -2
A6: 3
A7: 3
A8: -5
Total: -11 (have a formula set up to only count the best 4 scores).
I want to be able to add up those columns, and since only the lowest 4 scores count, I need E to equal zero. I get that I could just put 0 there, so I'm being a little picky (in golf E represents Even par, essentially a value of zero for the purposes of this game). There are 20+ teams in the game so I need E to be recognized as zero in each of those fields.
Sheet 1 has 3 columns: grade, step, NBS
Sheet 2 has 3 columns: SM, grade, step
I want to add a column NBS to sheet 2 for that exact grade and step, from
the data on sheet 1.
I tried the following formula but it gives me #value!.
=INDEX(sheet1!$C$2:$C$6,MATCH(B2&C2,sheet1!$A$2:$A$6&sheet1!$B$2:$B$6,0),3)
This formula has been working fine for me...until I have the condition where no value >0 has been entered in my LOOKUP range as yet. Or at least that is what I have managed to test so far. I've verified that my values have the same format (General) and I've verified that my ranges are all of the same size.
I'm looking in one worksheet for a work order meter reading that will be entered in another sheet when the Unit # for the equipment matches. I discovered if there is a work order entered for and no meter reading has ever been recorded yet, I get the #N/A error. If I go in and put a fictitious meter reading in of 1, the error goes away. It doesn't like a blank or zero meter reading and I need to know how to get around this. Here's the current calculation:
I referred the above two articles and accordingly created Personal.xls file in XLSTART folder. Here is the screenshot: http://dl.getdropbox.com/u/872430/excel.png I have done nothing else to the workbook except what is seen in the screenshot.
I have tested the funtion by using it as a formula in the Personal.xls file.
When I start Excel, Personal.xls does start up but the funtion is not available to my in my other workbooks. Is there anything that I have missed out?
I have a very large excel spreadsheet with many formulas in it. Some of the formulas are giving a 0.00 value even when there should be a $value. I don't know why this is happening? It is not happening to every formula and it is not consistant within the same row or even the same column. Most of these formuals have been used in this spreadsheet for years by many different people with no problems.
View 4 Replies View RelatedI noticed that when I clicked F4 Button on the keyboard it shows the screen resolution(with screen 1 and screen 2) as though one wants to use projector. The keyboard's configurations seems different from what I am used to.
What I can do to resolve this as I wanted to use the F4 Button referencing($).
I have a problem with isnumber giving me two different results. One time it will evaluate the following as true:
ISNUMBER(0)
and in the same sheet it will evaluate the same as false.
I need ISNUMBER to NOT recognise "0" as a number all the time.
I've got a Macro that generates three reports for me, one at a time.
After a report has been generated it creates an Email and attachs the report to the Email, I then check the report is ok before sending out.
The problem is, that once the first Email has been generated Excel is pushed into the background and the macro sloooooooows down.
I believe (though I will quite happily be wrong) this is because Excel is no longer the PC's main concern.
What I was wondering was, is it possible to bring Excel back to the foreground once the Email has been generated.
I have a CSE formula that's been working great since day one.
In B202 I have the name Magnecraft.
In Row9 I have all the possible sources for this item starting in D9:CB9.
The fx in C202 is as follows:
{=SUBSTITUTE(MCONCAT(IF(INDEX(D202:CC202,MATCH(B202,B202:B202,0),0)="X",","&$D$9:$CB$9,"")),",","",1)}
I have an "x" in E202 and I202.
C202 should then show (in this case) Abacus and A/E as the 2 sources available.
I'm getting an #NAME? error.
And if I insert a new row, all the data in each cell in C"C turns to #NAME?.
Cell A3 on my SHEET1 has the following formula =DATE(YEAR(C1),MONTH(C1) + 1,DAY(C1). It goes on like this for the next 12 months (+2, +3, +4....).
Column B on my SHEET2 has One of the five product codes (A, B, C, D, E) and Column D on my SHEET2 has manually entered dates
I created the following condition for each product code under each month in SHEET1
=IF(MONTH(Sheet2!$D$1:$D$39)=MONTH(Sheet1!$A$3),COUNTIF(SHEET2!$B$2:$B$39,"=A"),"")
The formula only works for two product codes (A and B), and then yields blank cells.