Array Fx Is Giving Me A #NAME? Error

Feb 4, 2009

I have a CSE formula that's been working great since day one.

In B202 I have the name Magnecraft.

In Row9 I have all the possible sources for this item starting in D9:CB9.

The fx in C202 is as follows:

{=SUBSTITUTE(MCONCAT(IF(INDEX(D202:CC202,MATCH(B202,B202:B202,0),0)="X",","&$D$9:$CB$9,"")),",","",1)}

I have an "x" in E202 and I202.

C202 should then show (in this case) Abacus and A/E as the 2 sources available.

I'm getting an #NAME? error.

And if I insert a new row, all the data in each cell in C"C turns to #NAME?.

View 9 Replies


ADVERTISEMENT

Giving '400' Error

Jun 19, 2008

Sub testDateCompare()
Dim nmiDate As String
nmiDate = CDate("23/4/08")
Dim origDate As String
origDate = CDate("23/04/2008 15:05")
origDate = Left(origDate, InStr(origDate, " "))

Dim minDate As String
minDate = WorksheetFunction.Min(origDate, nmiDate)
MsgBox minDate
End Sub

Giving '400' error!?

View 9 Replies View Related

FileFormat Giving Error In 2000

Feb 9, 2007

I am using VB6 to automate excel. Ofcourse, the code needs to work with 2007 and all lower levels. When trying to save the excel doc in 2007 I get no errors. However, in 2000 (using the same code) I am unable to save my document.

Here is the
OfficeDoc.SaveAs FileName:=NewFileName, FileFormat:=FileFormatValue

It fails with error 1004: application-define or object-defined error.

I have checked to make sure no other office documents are running in the background under task manager.

View 9 Replies View Related

Simple If Greater Than Formula Giving Error

Jan 19, 2012

I'm getting a mismatch error on my If activecell.value > 5 Then portion of this code. I'm trying to say if the value in column AG is greater than 5 then create an email address from the first and last name. I've even made sure to copy and paste the formula results as values.

Code:
Sub CheckPFPDates()
Dim OutApp As Object
Dim OutMail As Object
Dim cell As Range
Dim emails As String
Dim salution As String
Dim currenttime As Integer

[Code] ........

View 2 Replies View Related

VBA Add Comment To Range Of Cells Giving Error

Feb 28, 2014

When i try to add comment to range of cells, i am facing error.

rng.AddComment "Comment"

View 2 Replies View Related

Indirect Giving Me A REF Error When Closing Workbook

Nov 2, 2007

My indirect formula doesn't work when I have the entire path defined. I have the entire filepath specified (which will never change), and then I have cell A6 with the tab name of the worksheet on the workbook
.
Workbook 1 named 'Testme' contains the table with range a2:b5
Worbook 2 contains the formula

I put this formula into workbook2 (the tab in the example is named hitab & I put that name in cell B6)


Here is what I have:Does not work even when other workbook is open
=VLOOKUP(B6,INDIRECT("'H:CUSTOMERSCurrentClientAMRO and General SuppliesBearings, Motors, PTsSavings Tracking[Testme.xls]"&A6&"'!a2:b5"),2,FALSE)

This DOES work when workbook is open, but not when it is closed (which would seem logical if when the workbook is closed, the formula needs the exact path)
=VLOOKUP(B5,INDIRECT("[Testme.xls]"&A6&"!$a$2:$b$5"),2,FALSE)

I can hard code everything except the tab name. Why doesn't Indirect recognize an entire file path and also why does it give a REF error?

- I did a search and found that some people said to use the add-in Indirect.exe. I followed the link and the page was no longer found.

View 9 Replies View Related

Special Cells Paste Giving Error

May 29, 2006

I am trying to use the Special Cells Goto and Paste, but I am getting an error saying 'this operation requires the merged cells to be identically sized' when I do the Copy the value that I want, Goto Special|Constants, then Edit|Paste Special|Values|Multiply. The cells containing constants are selected and if they are together, e.g. B7 & B8, then there is no problem, but if they are apart e.g. B7 & B9, I get the error.

View 5 Replies View Related

Worksheetfunction.match Giving Run Time Error '1004'

Mar 4, 2008

I am trying to used match function in the code but I am getting the following error:

Run time error '1004'
Unable to get the match property of the worksheet-function class

Here is the

View 9 Replies View Related

Sumif Giving VALUE# Error When Mixing Sheet References

Jul 29, 2009

I am very comfortable with using sumif statements although I have tried it link two data from 2 different sheets and I keep getting returned #VALUE!

I get a message "Unable To Read File" in a pop up box before fully opening.

View 9 Replies View Related

Macro Code Giving A 'application-defined' Error

Jul 8, 2006

The following code is giving me an object-defined or application-defined error:

wsDst. Range("E" & NextRow) = "=VLOOKUP($B" & NextRow & ",PriceList!$A:$IZ,MATCH(HLOOKUP($I" & NextRow & ",PriceList!$C$3:$IZ$3,1,1,PriceList!$A$3:$IZ$3),FALSE)"

View 6 Replies View Related

Protected Sheets With Macros Giving Runtime Error 1004

Mar 3, 2009

I created several macros objects to do simple hide columns, filter on, filter off, etc. type functions, using the Tools / Record Macro feature. Then discovered they won't work in a protected worksheet. Is there a way around this situation, other than turning protection off? Here's an example of the code for one of them, although I get the error or every attempt to perform a macro once the sheet is protected:

View 4 Replies View Related

Input Box Is Giving "Type Mismatch" Error

Oct 9, 2008

Below there is code for some inputboxs as well as some if statements on their results. The Exit sub situations work fine but If i do actually put a valid answer in the secod input box then it results in a mismatch error on the OR statement... why the first inputbox works fine but the second one gives me a type mismatch error when a valid input is given? Also if there's a more efficient way to do this please feel free to correct the code.

View 4 Replies View Related

#N/A ERROR In Array Formula

Jan 30, 2008

How do you suppress the #N/A error in the array formula below:

J$2:$J$1201,MATCH(1,($B14=Datasheet!$I$2:$I$1201)*($E$13=Datasheet!$G$2:$G$1201),0)))

View 9 Replies View Related

Array UDF Returning #VALUE! Error

Mar 23, 2008

I have come up with the following array UDF to help me split a large list of values into list of smaller groups.

The function takes the 3rd input argument to to understand how many smaller lists it needs to split the bigger range.
The 2nd argument simply specifies a seperator, either "," or ";"

On using the same on a worksheet I'm getting a #VALUE! error and for the life of me am not able to pinpoint the problem area.

Public Function CBOList(Rng As Range, App As String, OutRng As Range) As Variant

Dim Func As WorksheetFunction, UniqueVals As New Collection
Dim cnt, who
Dim ctr As Long, lst As String
Dim myarr() As Variant

Set Func = Application.WorksheetFunction

CBOList = ""

Application.Volatile...........................

View 9 Replies View Related

Average Array #DIV/0 Error

Nov 18, 2006

I am using the following array formula to give the average number of days aging on overdue reports for my staff where Manager and Aging_on_Overdue are named ranges in my input data: {=AVERAGE(IF((Manager="Joe Smith")*(Aging_on_Overdue>0), Aging_on_Overdue))}

This works fine as long as Joe Smith has Overdue reports, but returns a # DIV/0 if he has none. How do I get a formula to return 0 if he has no overdue reports? I need this because I have to do a weighted average of the group and my SUMPRODUCT formula returns a #DIV/0 for the group if any member of the group has no overdues.

View 2 Replies View Related

Get Error When Declaring A Jagged Array?

Jan 13, 2010

I'm trying to create an array of arrays (a jagged array). According to Microsoft's VB developer center I can declare in the following ways: ...

View 6 Replies View Related

Subscript Out Of Range Error In Array

Mar 21, 2012

I am pasting the VBA code below:

Public No_of_Sims As Variant
Public Sim_No As Variant
Public Ground_Up_Agg As Variant
Public UseSelfInsuredVehicle As String
Public Option_Name(1 To 12) As String

[Code] .....

The code highlighted in BOLD is where I am getting runtime error 9 (Subscript out of range).

View 7 Replies View Related

Subscript Out Of Range - Array Error

Dec 30, 2012

When I run my code it comes up with Error 9. I clicked debug and took a look at it and couldn't find out why it wasn't working.

Code:
Private Sub Hundred_Day_MA()
'Sets Last Trading Day's Date
Dim LastDate As Date: LastDate = ThisWorkbook.PreviousBusinessDay(Now, 1)

[Code]....

View 5 Replies View Related

Error On Function Applied To Array

Jul 20, 2009

I have the following code (below) which calls a function to return the sum of values in a specific part of the array.

I haven't set the function up correctly as it is causing an object not defined error(424), but I can't see where and have been going round the houses changing it. I'm wondering if it's my confusion over when to use By Val?


Sub getDataIntoArray()
Dim arrDataTot()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False

On Error Resume Next

ReDim arrDataTot(1 To 1)

View 9 Replies View Related

Error Filling Array With Only Few Values Within Loop

Feb 26, 2014

I am trying to fill an array with only a few values within a loop (when XspacingA is 0.5, add the value of the Line to the array) and keep getting the error "Subscript out of range".

View 3 Replies View Related

Redim Function - Array Already Dimensioned Error

Sep 20, 2012

I have an array that is going to have a variable length every time the macro is run. I set a really high length at the beginning and when I want to unload the data, I want to redim the array to only the amount of data that was loaded into the array.

I am getting an error of "Array already dimensioned" when use the redim function near the end of my code below.

Code:

Private Sub Trend_Click()Dim GraphRow As LongDim TodaysYear As Integer,
Adjustment As Integer, EndYear As Integer,
StartYear As IntegerDim X_Axis_Array(1 To 100) As VariantDim SelectedStmt As StringDim X_Axis_ArrayEnd As IntegerTodays

[Code] ........

View 5 Replies View Related

String Limit In Array - Querytables - Error 13

Jun 23, 2007

I need understanding what is the maximum length of string data type. I read that is 63K characters... but, in my case... maximum value is 253. I don't know why happens this. here is some code from one of my buttons.

Private Sub btn_procesare_Click()
Dim intUnit As Integer
Dim strBuffer As String
Dim contor, var_else, cale, dest, dest_final, masca, filtru, **** As String
Dim vntbuf As Variant
Dim sql As Variant
For i = 0 To Me.ListBox2.ListCount - 1
Application.Worksheets(1). Range("A" & i + 2).Value = Me.ListBox2.List(i, 0)
Next...........................

when watch for x, the value is maximum 253 characters. I get error Data Type Mismatch - Error 13 with this.

View 4 Replies View Related

Runtime Error 381 - Invalid Property Array Index

Apr 21, 2014

When I try to populate a worksheet with the data from a multicolumn listbox on a userform.

I have references which list index is to go to which cell on the worksheet, however if there is no entry in this list index it is giving me this error.

As the listbox could have 1 line or up to 10 lines populated, I think I need to put an error handling on so that if the entry in listbox index is "" then resume next, or something like that. However everything I have tried doesn't work and I keep getting this error.

Here is the code I have to populate the worksheet from the listbox. There are 7 columns and 10 rows.

How to handle this error?

[CODE]
Private Sub cbPrint_click()
Call Error_Handling_VBA_On_Error_Resume_Next
Dim ws As Worksheet
Set ws = Worksheets("Invoice Copy")
With ws
.Range("B11") = CusName.Value

[Code] ......

View 1 Replies View Related

Wrong Data Type Error In Simple Array Formula

Jun 30, 2013

I am trying to use FIND and an array formula to find the position of text in a range of cells (A2 and A3 in the example) which could be one of a number of options (C1:D1 here). But the array formula throws up the following error: "A value used in the formula is of the wrong data type". The simplest illustration of the problem is as follows. The formula in B2 is

Code:
{=FIND(($C$1:$D$1),A2)}
and $C$1:$D$1 contain REF and ATM respectively. [/CODE]
REF
ATM
203047 05AUG 08.55 OKEHAMPTON ATM
#VALUE!
CO-OP GROUP 380611 REF 191 7553375222 BCC
22

We see that B2 has a #VALUE! error - wrong data type. But for some reason B3 is ok returning 22!

View 9 Replies View Related

Adding Hyperlinks To Cells Using Array - Object Required Error

Aug 12, 2013

Im trying to add hyperlinks to cells using an array but im getting "run time error 424 - object required" error. THe code im using is:

Code:
Sub hyper3()
' not WORKING - ARRAY to add hyperlink to cells
Dim rngIn As Range

[Code]....

View 3 Replies View Related

Comparing A String To Values In An Array Resulting In A Run Time Error 1004

Jul 15, 2009

This workbook is designed to prompt the user with inputboxes allowing them to enter a name, hyperlink a file to that name, and then a date. Next all the drawing names are read into an array and stored. Along with some minor sheet formatting, this is what happens when the button "Add Drawing" is clicked.

Next, when the button "Revise Drawing" is clicked, the user will be prompted with an inputbox for a drawing name. This name will be compared to the names in the array. If the name is found, the row containing that drawing will selected and the user will be prompted to update the hyperlink, then the "drawing date" will be moved to the right by one column, then the user will be prompted for another date replacing the date that was moved. The first sequence of commands or button works fine. The button "Revise Drawing" prompts the user with the inputbox requesting the revised drawing name, then develops the runtime error 1004.

View 3 Replies View Related

Dynamic Array Redim Preserve: Run-time Error 9, Subscript Out Of Range.

Jul 20, 2009

I found quite a few posts about this problem, but none of the answers was any use to me. I need to redimension a 2 dimensional array in a Sub. I deleted all the code that is not of interest:

View 3 Replies View Related

IF Giving Me NAME#

Dec 13, 2006

I must be using hte wrong command or I am dumb.

Cell B8 I have a validation list of either Hub, Router, N/A

On cell C8 I want if (B8=Hub,3COM,0) but I get a NAME error. Is it because it won't work with letters but it can make the calculation?

View 9 Replies View Related

Vlookup Giving 3n/a

Oct 14, 2009

IM USING VLOOKUP TO FIND a VALUE IN AN ADJACENT CELL, BUT IF THE VALUE ISNT LISTED THEN I WANT IT TO DO NOTHING. EXAMPLE

=VLOOKUP(1100,Tuesday!A:F,6)

BUT IF THERE IS NO 1100 TO LOOKUP THEN GIVE ME A 0 VALUE OR DO NOTHING

View 3 Replies View Related

Giving Letter A Numerical Value

Apr 2, 2014

I'm working on a spreadsheet and I want the letter "E" to have a numerical value of zero, and not necessarily in just place as my sheet will be regularly updated. If you're a fan of golf, you will understand what I am doing. I'm basically making a custom leader board for a fantasy golf game that I'm doing, and I'd like for the letter E to represent the value of zero when I am adding up the scores.

For example
A1: -1
A2: -3
A3: 4
A4: E
A5: -2
A6: 3
A7: 3
A8: -5
Total: -11 (have a formula set up to only count the best 4 scores).

I want to be able to add up those columns, and since only the lowest 4 scores count, I need E to equal zero. I get that I could just put 0 there, so I'm being a little picky (in golf E represents Even par, essentially a value of zero for the purposes of this game). There are 20+ teams in the game so I need E to be recognized as zero in each of those fields.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved