Runtime Error Referencing A Picture?
Jan 17, 2012correct this line of code?
Workbooks("Copy of ReportMacros.xls").Sheets(Sheet1).Shapes("Picture 1").Copy
ADVERTISEMENT
Runtime Error 481 - Invalid Picture
Jan 16, 2013I am using some code I found on the internet, but I have made some samll changes to it and I am getting a Run-time error 481 - Invalid picture Some of the Pitures do load but some of them dont load.
Here is the code I am using
Code:
Public Declare Function URLDownloadToFile Lib "urlmon" Alias "URLDownloadToFileA" (ByVal pCaller As Long, _
ByVal szURL As String, _
ByVal szFileName As String, _
[Code].....
Getting Runtime Error: Syntax Error Or Access Violation
May 3, 2006I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
Error In Runtime First Go, No Error In Debug Or Second Go
Jul 6, 2006The code thats generating the error is the following:
For Y = 8 To 131
TmpDate = Empty
Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
TmpDate = Range("A1").Value
For Langd = 1 To Len(TmpDate)
TmpChar = Mid(TmpDate, Langd, 1)
If Not TmpChar = " " Then
TmpComp = TmpComp + TmpChar
End If
Next Langd
TmpDate = TmpComp
TmpComp = Empty
If Len(Dag) = 1 Then
Dag = "0" + CStr(Dag)
End If
Macro continues before the Next-statement...
(it might not be good programming, but I think it should work).
A little explanation to the code.
I have a spreadsheet located on the intranet that has values I need in my spreadsheet. These figures are sorted by date, so I search for the date to find the right figures.
The line Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
works prefectly. I can see the value in my spreadsheet in the cell A1. its the next line that causes the error "Type mismatch".
The value I get from the intranet spreadsheet looks similar to this:
"1 Jul 2006 " (note all the spaces).
What I do is just run it through a loop and cut of all spaces so it will look like this: "1Jul2006" to be sure I dont miss a space or anything.
Now to the funny part.
The error only happens at runtime on the first go.
If I chose to END the macro then and there, and then run it again from the top it works perfectly.
If I set a stopsign to debug the code, it works perfectly on the first go too.
Can anyone explain to me why that happens??
I know enough about programming to handle my syntax errors and so on, but I cant see anything wrong in this one...
Please note that this isnt the the entire code.
I'm building a report on 12 diffrent spreadsheet. The main macro is almost 2000 rows of code, and it call other Subs too (because of limitations in the VBA-editor. A macro cant to be too big), so its impossible for me to post the entire macro...
Runtime Error 424
Mar 5, 2007if I leave the inputbox blank I get an Excel error. I.e. it says that the formula I tried to type contains an error..... Is the Type:=8 not working properly here?
Dim Addr As Range
On Error GoTo Problem
Set Addr = Application.InputBox( _
Prompt:="Enter or Select a cell in the last record", _
Title:="Select Last Record:", Default:=Selection.Address, Type:=8)
If Addr Is Nothing Then Exit Sub
Edit: I guess I should mention that I am trying to retrieve a cell reference from the user via an input box. This cell reference will help me determine the last record in the spreadsheet.
Runtime Error 13 -
Sep 18, 2007In Excel 2003 I have made a model for evaluating co-workers. The model consist of a number of different questions regarding performance. At the top of the sheet, the user have to select som data from a drop down list, and depending on the answer (upward or downward), som of the questions in the sheets is hidden or shown. For this purpose I have created this string of VB-code in the sheet:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$E$5" And Target.Value = "Upward" Then
Rows("20:41").EntireRow.Hidden = True
ElseIf Target.Address = "$E$5" And Target.Value = "Downward" Then
Rows("20:41").EntireRow.Hidden = False
ElseIf Target.Address = "$E$5" And Target.Value = "" Then
Rows("20:41").EntireRow.Hidden = False
End If...........
Runtime Error '9' ..
Oct 30, 2008He's the issue i'm getting with the code...
Public Sub Auto_Open()
wrkbkName = Application.ActiveWorkbook.Name
'this little snippet of code determine which branch the user is at
'based on the ip address
'if ip is like 192.168.1.xxx then we on welthsrvr
ipadrr = GetIPAddresses(True)
If Left(ipadrr, 9) = "192.168.1" Then
Runtime Error 13
Dec 14, 2008Private Sub Worksheet_Change(ByVal Target As Range)
If Not (Application.Intersect(Target, Range("G9:BF94")) Is Nothing) Then
With Target
If Not .HasFormula Then
.Value = UCase(.Value)
End If
End With
End If
End Sub
However when ever I select more than one cell which already has text in it and press delete I get a runtime error 13 and the debugger highlights this line:
.Value = UCase(.Value)
Runtime Error 9
Jan 26, 2009I get a runtime error 9 on my excel form.
This line is highlighted:
Workbooks("Proposal for XL.xlsm").ActiveSheet.Range("S13:AH13").Copy
Runtime Error With 97
Apr 12, 2006I have created a workbook for external users that allows them to track data on a monthly basis and submit to me. Each spreadsheet has a code to sort names alphabetically. Here is the
Sub Button53_Click()
Dim i
For Each i In [B10:K309]
If i.Value = 0 Then
i.Value = ""
End If
Next
ActiveSheet. Unprotect Password:="xxx"
Range("B10:AB309").Select
Selection.Sort Key1:=Range("B10"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
ActiveWindow.ScrollRow = 10
ActiveWindow.SmallScroll ToRight:=-5
Range("B10").Select
ActiveSheet.Protect Password:="xxx", DrawingObjects:=True, Contents:=True, Scenarios:=True
End Sub
Everything works great for the majority of users, but those who are using Excel 97 return a runtime error on the following line: If i.Value = 0 Then. This code was created in Excel 2000 since that was the software our office used.
Runtime Error 91
Apr 5, 2007I'm getting Runtime Error 91 on this line:
destRange = Range(.Cells(destRow, 2), .Cells(destRow, 7))
Here is the overall function:
Public Sub sendRow(myRow As Integer, destinationSector As Integer)
'************************************************************
'1. Copy Row... Cols 2-7
'2. Find First Empty in new Sector
'3. Paste Row on first new Row
Dim myBounds() As Integer
Dim destRow As Integer
Dim destRange As Range
Dim cutRange As Range
Dim y As Worksheet
myBounds = getSecBounds(destinationSector)
This subroutine is being called from the Worksheet_Change event, and should therefore have an active sheet.
Runtime Error 1004 Application-defined Or Object-defined Error
Jul 24, 2007I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub
Runtime Error '1004'
Jan 12, 2007Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error...
______________________________________________
Runtime Error '1004':
Unable to set the Visible property of the Pictures class
______________________________________________
When I select Debug, it takes me to the line with Me.Pictures.Visible = False
Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?
Runtime Error 1004,
Feb 22, 2007Getting a error message when opening a workbook "Runtime error 1004" I dont know much about excel and the user explained it to me as best she could . Here is where the script bugs:
Sub auto_open()
fdist = ActiveWorkbook.Name
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Worksheets("f_cumul").Cells.ClearContents
Worksheets("f_cumul").Cells.ClearFormats
Worksheets("vtes_dj").Select
Range("a1").Select
Selection.End(xlDown).Select..............
Runtime Error '6' : Overflow
Oct 19, 2007I have read the other posts on here and swapped, Dim timeinc As Interger to Dim timeinc As Long and Dim timeinc As Double but neither worked. They both make the calculation 0 and I can not figure out why. This macro has worked before and is failing only on this new dataset which I have attached as well.
I am solving this problem on a PC and the macro was built for a Mac but I do not think that should change much as when I run it on a Mac it fails the same
Functions :: Runtime Error '9'
Nov 3, 2008 I've been having some problems with my company's spreadsheet in terms of calculations using Add Ins.
Some of the functions work within the spreadsheets - others give me a runtime '9' error,
Userform On Top Of Another -> Runtime Error 402
Oct 20, 2011I have an application using two userforms. Following sequence is used:
1. Open Userform1 (with uf.show)
2. click on a commandbutton in userform1 opens a second userform on top of userform1.
3. Close userform2 with commandbutton on userform2 (userform2.hide)
(I did not want the user to close the UF via the "X" )
Runtime error 402 : Must close or hide topmost modal form first
So, I changed my code so when the user clicks the commandbutton in userform2
userform1.hide (which is the topmost)
userform2.hide
But again I get the same error.
VBA Overflow - Getting Runtime Error 6?
Sep 14, 2012I have a script that usually runs, but all of a sudden gives me a run-time error 6: Overflow error. Basically I'm searching for certain criteria and copying or cutting and pasting lines from one sheet to another. Why I'm getting the error by the code below?
Sub teal()
Dim i As Long
Dim qq As Long
Dim assignmentnum As Long[code]......
Keep Getting Runtime Error 1004
Apr 21, 2014When I run the following code it keeps giving me a runtime error 1004.
Code:
Sub ImportData()
Dim fNameAndPath As Variant
Dim wb As Workbook
Dim cNextRow As Long
Dim Ans As String
NextRow = ThisWorkbook.Worksheets("Errors").Range("B" & Rows.Count).End(xlUp).Row + 1
cNextRow = ThisWorkbook.Worksheets("Compare").Range("A" & Rows.Count).End(xlUp).Row + 1
[code]...
Macro Runtime Error?
Jul 16, 2014I have a bug on a macro that was working until yesterday. I did not write this macro and I cannot seem to fix it. The debug stops at the below command. The data it looks at seems to be in the right format so I think there is something else that is wrong.
Set PTCache = ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)
Runtime 1004 Error
Feb 15, 2008I have this macro and I keep getting a 1004 runtime error 'PasteSpecial method of range class failed' on the highlighted line,
Sub Print_()
'
Sheets("Sheet1").Select
Cells.Select
Selection.Copy
Sheets("Print").Select
Cells.Select
Selection.PasteSpecial Paste:=xlPasteColumnWidths, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
With Selection.Interior
.ColorIndex = 2
.PatternColorIndex = xlAutomatic
End With
Runtime Error 50290
Jul 14, 2008I have a workbook with some Change Event code posted below. It executes fine 90% of the time; however, cells with dropdown lists create an issue. If I double-click one of the dropdown cells (to directly type a value), then while my cursor is in the cell, click the small arrow to display the list, a 50290 (Method Intersect of Object Global failed) error occurs and highlights the red line in my code. Any ideas what this is about and how I can avoid it? (I've also included my Selection_Change event, as that's the only other code on this sheet).
Dim OldValue As String
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("AD:AF")) Is Nothing Then Call Summary.summarize
If Not Intersect(Target, Sheets("ProjectData").UsedRange) Is Nothing Then
edited = Target.Row
SingleVal Sheets("ProjectData").Range(edited & ":" & edited)
End If
If Not Intersect(Target, Range("K:K")) Is Nothing Then
If Target.Value "N/A" Then
While InStr(1, confirm, "y", vbTextCompare) 1 And InStr(1, confirm, "n", vbTextCompare) 1....................
Runtime Error 6 - Overflow
Nov 11, 2004I am currently trying to develop a code for calculating the value of an asian option using a binomial tree... In running the macro I get a run-time error 6 - overflow message. I have put the code below. note that the code is still under construction - in order to check it I have put in some hard-coded figures. Of course, these should be calculated in the model eventually. The bug is in calculating the "InterO1" value ...
Sub bereken_asian_call()
sig = Sheets("Sheet1"). Range("B1").Value
T = Sheets("Sheet1").Range("B2").Value
N = Sheets("Sheet1").Range("B3").Value
r = Sheets("Sheet1").Range("B7").Value
div = Sheets("Sheet1").Range("B8").Value
S = Sheets("Sheet1").Range("B12").Value
K = Sheets("sheet1").Range("b13").Value
alpha = Sheets("Sheet1").Range("B14").Value
Dim St() As Double
Dim F() As Double
Dim O() As Double
Dim NewAv1() As Double
Dim NewAv2() As Double
Dim Ffut1() As Double
Dim Ffut2() As Double
Dim Ffut3() As Double
Dim Ffut4() As Double
Dim den1() As Double
Dim den2() As Double
Dim InterO1() As Double
Dim InterO2() As Double
dt = T / N
u = Exp(sig * Sqr(dt))
d = 1 / u
pu = (Exp(dt * r) - d) / (u - d)................
Runtime Error '438' With Vlookup
Oct 13, 2006I have written some code to perform a Vlookup for some data from another sheet but when i run the code it comes up with runtime error '438' "Object doesn't support this property or method".
Sub RAS_StockUpdate()
Dim Count As Integer
Dim SKU As Long
Dim FileName As String
FileName = ActiveWorkbook. Name
Workbooks.Open FileName:= _
"\Hwyfile1publicRange TransitionRAS DatabaseRAS_Data_Export.xls"
Windows(FileName).Activate
For Count = 1 To 100
Range("B16").Select
ActiveCell.Offset(Count - 1, 0).Select
Select Case IsNumeric(ActiveCell)
Case True...................................
Macro Runtime Error 9
Dec 7, 2007I downloaded an excel file from a German student's site. With this file, it is possible to calculate very simply species turnover (I'm a biologist) activating a macro. When I run it, afetr answering lots of questions (which I think I answer well), it appears an "error run-time 9 - subscript out of range". In the download folder there were only two files: turnover.xls and instructions.pdf
Here is the code. The debug highlights the bold line.
.............................................
Function Works But Get Runtime Error 13?
May 20, 2014This is a function to add the ascii values of a string to give a single value. Initially I wrote this as a Sub routine and it worked fine, but when making it into a function, I get this error. From a little research it appears that you can not use a string as an argument for a function call, yet that defeats the object of this particular function.
The intention of this function is that it works on a name in a given cell and the value (an integer) that is produced is then displayed in another cell, or if using it as a formula, the cell the formula is in.
I simple wrote the work "Hello" in cell A1 the ascii values of these added ignoring any spaces give 500 which is correct.
Runtime Error 424 When Trying To Show Userform
Jul 25, 2014Ive created a userform that I want to have input data into specific cells in my worksheet. I have the userform created, and some of the other VB stuff written, but it is far from being functional. I have come across the first of what to is to be many problems (Im pretty rusty at VB).
I have a button on my spreadsheet that is supposed to show the userform using this macro
[Code] .....
When I click the button, it breaks at "Form1.Show" giving me "Run-time error 424 : Object Required".
Runtime Error 13 Type Mismatch?
Aug 18, 2014i have written a vba code to open excel file saved at network server. The issue is code opens the file but gives "Runtime Error 13 Type mismatch"
Code :
<code>
Sub test_opening()
Dim filepath As String, filename As String, completename As String
Dim hurray_macros As Workbooks
[Code].....
Runtime Error 9 - Subscript Out Of Range
Feb 12, 2014I am trying to consolidate data in Sheet7 of all the files in a folder to a single file. In case a file doesn't contain Sheet7, i want to get the name of the workbook. The code is working fine, but after it loops it is returning Runtime Error 9 - Subscript out of range.
[Code] .....
Runtime Error Code 1004
Jan 16, 2007I am converting Excel Templates which were developed in office 97 to Excel 2003.The templates are running fine in office 97 ,but when I run the same template in off 2003 I get the error "Run time Error Code 1004 : Application or Object Defined " and when I tried to debug the cursor is pointing to a cell which contains a formula which add multiple cell values.Can any one throw some light on this why the template which works fine on office 97 is not working in office 2003?
View 11 Replies View Related
