Is there anyway I can schedule an excel workbook to open up at a certain time; I have some code attached to the Workbook Open function; so when the workbook is opened the code will run; but I need the workbook to automatically open at say 17:00 everyday so the code can run.
View 9 RepliesI have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
I am trying exactly the same things stated in here Open two workbooks at the same time as stated in the other thread's answer I would love to "just use the Workbook name IF both Workbooks are in the same folder." both files are in the same folder and this is the code that I am trying to use
Private Sub Workbook_Open()
Workbooks.Open ("toto1234.xls")
and it does not work any one explain me what I am doing wrong?
I have put together a duration schedule for work and have it set up now so the days with automatically fill if they are on or between the start/end date. Below is the formula that I have constructed. As of right now each activity is colored the same. I would like to have each activity match the color of the person performing it. My crew names are all in column A with a conditional format to be color coded with the name entered.
View 11 Replies View RelatedI am trying to have a Command Button launch Outlook and attempt to schedule an Appointment.
The person would enter the date on to the cell below and the time as well. Additional I would also want it to grab email addresses from the Recipients box and place them on to the TO field....
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I'm trying to look at options for scheduling macros to run at a particular time. Ideally I would like to run one at 3:00 am during every week night. From what I've looked into, I can run the OnTime procedure and it could schedule this to run each night. Does anyone know if this is correct, and if there are any other options avaliable to me?
Also, does anyone know if this can run automatically if Excel is closed, or does Excel have to be open? Does the workbook have to be open?
I've been tasked at work to make an excel file to do more than what I think I can figure out on my own. What I need done is this:
1. Every Monday, check excel file for data
2. If data exists, send email with said data
Here's my issues:
How do I get the workbook to open while logged off the computer? The file is stored on a share network drive, not locally. How do I get it to send an email without someone logged on to click "send"?
I tried using windows scheduler, but I don't have sufficient privileges to run as batch (IT restrictions).
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open()
Dim dTime As Date
dTime = Time
If dTime >= TimeValue("9:30 PM") And _
dTime < TimeValue("9:40 PM") Then
ImportData
End If
End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I'm basically looking for a forumla that will count each employees total scheduled work days for the month inserted and then depening upon the day it is will show how many days the employee has left to work for the month.
View 9 Replies View RelatedMy Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
View 5 Replies View RelatedI would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
View 5 Replies View Relatedthis is a relatively straightforward query, would be obliged for any tips on same. I have the following piece of -
View 2 Replies View RelatedCreate a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
View 9 Replies View RelatedI did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
I have an Excel application in which I use the Workbook Open event to show a userform.
This works fine when Excel is not already open, but if another Excel workbook is already open, the Workbook Open event does not work.
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
I run a model in Excel that automatically saves my file every xx iterations. After saving the file I want to make a backup of the file. Tried
[Code] .....
but get a permission denied error message.
I don't want to use .SaveAs as it is a huge file that takes a while to save and SaveAs has a tendency to break links that should not be broken..
Here's my macro:
Code:
Sub CopyRow()'
'Copies row to new sheet, highlights it, marks column 'A' as copied.
'
Dim cCell As Range
Set cCell = Selection.Cells(1, 1)
Selection.Copy
Sheets("Sheet2").Select
Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
This is pretty basic I just don't know what command to use. I have a macro that's supposed to copy data from one workbook to another, it works fine but In the macro it open the other workbook then closes it. I would like the macro to not reopen the second workbook if it is already open (since reopening causes it to lose the newly updated info). I think it can be done with a If command but I don't know which tried the following: If workbooks("M:/database") Is Open but of course 'is open' doesn't work, but can anyone tell me what to use instead.
View 2 Replies View RelatedNeed some VB Code to check if a workbook is open or not. Either way, it needs to be opened and made active.
I have tried using some of the answers already on here but not getting anywhere.
Looking for a macro, to run upon opening file, that opens a linked file and if the file is already open does nothing.
View 2 Replies View RelatedI have set up a workbook (wb2) that has external references to another workbook (wb1). All is good and works fine when you open the 2 files from windows explorer. I have then put a hyperlink to wb2 from wb1. When you click on this link the file opens but throws up errors saying some of the named ranges cannot be found?
View 3 Replies View RelatedPlease see attached files.
Book1.xlsx
test.xlsm
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
im looking for some code to transfer cells a3,d6,f9,i6,k10 and i18 from open workbook named "hello"
to
closed workbook named "goodbye" and input to next available row
a3 to a1
d6 to a2
f9 to a3
i6 to a4
k10 to a5
i18 to a6
How to Automatic open others Workbook when we opened the Master Workbook.
Examp.: I have a workbook (Master.xls), and when this file be opened, and then others workbook (Transactions.xls, Order.xls, etc.) is opened too.