Compiling Data From Multiple Workbook Into A Line By Line Master Schedule

Mar 30, 2013

I have about 180 workbooks which I need to compile into a Master Schedule.

All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?

Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?

View 1 Replies


ADVERTISEMENT

How To Make Function That Works On One Line Work On Multiple Line

May 19, 2014

I have this function that works on line 3 and if the conditions are met, the result is 1

=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))

Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1

I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,

View 9 Replies View Related

Convert Macro In 1 Line To Multiple Line Code

Dec 8, 2007

i hv following code

(i use generate macro)

my question is how to arrange the code from one line to multiple like :-

following code show in excel macro environment is one striaght line.


' Create new var on yr , and replace 2006 to CY06.

ActiveCell.FormulaR1C1 = _

View 9 Replies View Related

Multiple Line Texts To A Single Line?

Mar 30, 2014

I have a multiple line texts I want to convert it in single line like for Example:

The following contents is to be converted in a single line

contents:

[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on

Result:

[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on

View 4 Replies View Related

Read Pdf Or Doc File Line By Line And Then Parse Data Into Proper Cells And Rows?

Feb 23, 2013

I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.

View 11 Replies View Related

Read Range Of Data Line By Line Which Is Increasing Dynamically

Aug 20, 2014

I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.

vbaStk.JPG

What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.

I'm new to VBA and I'm not so sure what I'm doing with vba codes

View 1 Replies View Related

Paste Method When Compiling Data Into Master Worksheet

May 6, 2014

Here is my code thus far - it seems to go through the directory and copy data (single columns of 101 data-points) from the workbooks, but does not successfully paste it into the master-workbook (error message reads: 'paste method of worksheet class failed').

VB:
Sub LoopThroughDirectory()
Dim MyFile As String
Dim ecolumn
MyFile = Dir("C:Documents and SettingskbriemMy DocumentsErindi_i_vinnsluEXCELprufa1")

[Code] ....

View 3 Replies View Related

Search Unopen Sheet For Value / Change Color Of Line / Copy Line Paste?

Nov 17, 2012

Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.

When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:

Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.

The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.

Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.

View 5 Replies View Related

Excel 2010 :: Macro To Delete Last Line Of Data In Each Worksheet In Workbook?

Apr 24, 2014

I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.

Sub Macro1()
Macro1 Macro
Dim ws As Worksheet

[Code]....

View 2 Replies View Related

Combine 2 Cells With Line Breaks In Each Of Them And Keep Line Break Formatting?

Aug 5, 2014

I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:

A
B
C

1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street

View 7 Replies View Related

VLookup Returning All Occurrences Of Result Line By Line

Feb 6, 2013

I need the Service Order tab to populate with data from the CPR tab based on the IO#. Since there is more than 1 occurrence of an IO# I need a formula to list the 1st, 2nd, 3rd, etc result of the vlookup in the cell under the 1st.

=VLOOKUP($E$2,CPR!$L$4:$AA$12,2,FALSE),

When I drag this down I get the 1st occurrence of the IO# 777 I need all of them.

B C D
Atex ID#(unique id) Campaign name Site
Row 7 1st occurrence of IO# 777
Row 8 2nd occurrence of IO# 777
Row 9 3rd occurrence of IO# 777

View 2 Replies View Related

Inserting New Line With ONLY Formula From The Line Above - Basic VBA / Macro

Apr 30, 2013

I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.

I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.

I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.

View 2 Replies View Related

Report A List Line By Line Based On Name Criteria

Jun 21, 2008

Currently I am using Excel 2000. I did a search and couldn't seem to find the answer I was looking for. Hopefully someone can help. It would be greatly appreciated since I have been trying to figure out how to do this for days.

I am trying to create a worksheet that will pull info from a row on one sheet to another sheet based on the name; then continue to list the info on each line afterward until there is no more of the that particular criteria. See below (this is just an example to simplify the data but would need the same process):

This would be the data on sheet 1:

Name Bonus Commision

Tom $45 $50
Mary $25 $75
Mary $30 $80
Tom $60 $50
Tom $90 $25

What I would like to do is have 2 more sheets. One would be Tom's sheet and the other would be Mary's sheet and it would look like this:

Tom's Sheet:

Tom $45 $50
Tom $60 $50
Tom $90 $25

Mary's Sheet:

Mary $25 $75
Mary $30 $80

I am not completely familiar with all of the functions in Excel and compared to you guys I am a complete novice.

Is this possible to do in Excel without using a macro?

View 9 Replies View Related

Create Line Graph That Will Incorporate Multiple Columns Of Data In One Series Of Data

Sep 27, 2011

I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.

I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.

Example Below:

Column AColumn B Column C159261037114812

Now in the example all of the values are x values.

View 2 Replies View Related

Excel 2010 :: Insert A Line Every 4th Line?

Nov 29, 2013

I have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code

View 2 Replies View Related

Line Graph Not To Continue The Line If There Is Nothing In Row 10 Of The Table

Nov 6, 2009

With the attached spreadsheet i cannot workout how with the line graph not to continue the line if there is nothing in row 10 of the table.

for eaxmple if there is no value in cell M10, i would like the actual addtion line to stop at the last value on the graph that was in L10.

View 4 Replies View Related

Highlight Last Line Of Text And Copy To Line Below?

Mar 14, 2014

I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.

Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.

What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:

1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)

I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.

View 5 Replies View Related

How To Change Line Thickness In Line Graph

May 21, 2010

I have a chart sheet with a line graph that contains two series: I want to change their thickness, but I am not able to format it with VBA.

View 6 Replies View Related

Identify And Insert Line In Last Blank Line

Aug 22, 2012

Creating a macro that will identify the last blank line in column J and insert a line in it? The macro will need to look from the "bottom" as there is blanks cells above the last line.

View 5 Replies View Related

Put All Values Of A Specifice Line In That Matrix In A Line

May 20, 2008

I'm working with matrix in vba and i'm trying to put all values of a specific line in that matrix in a line in excel. For example:

Matrix =
1 2
3 4

and i want Range("B1:B2") = 3 | 4 (the second line of that matrix).
Is there any way of doing this without perfoming a loop?
[something like Range("B1:B2").value = 'range'(matrix(0,0) , matrix(0,1)) ]

View 9 Replies View Related

New Line With VBA On Rows And Merging New Line

Mar 14, 2013

The following code adds a new row at a given point (Based on a fomula in a column returning "1")

The code works well BUT I want to merge this new row from column A to coulmn M

Im not sure how to do this, (I dont want to merge the entire row)

Example Code:

Sub ExtLne()
Dim Lastrow As Long
Dim I As Long
Lastrow = Range("A" & Rows.Count).End(xlUp).Row
I = 1
While I

View 2 Replies View Related

Delete A Line.or Rather A Line On A Line

Apr 8, 2008

I have a spreadsheet where there is a white line that is over a row line. No matter what I do I cannot seem to delete it.

I zoom in but I cannot select it.

I change the border of the cells and it will not disappear.

I am completely lost as to what else it could be, no doubt it is a simple answer that is staring me in the face. I inherited the spreadsheet so not sure what was done in the past.

View 9 Replies View Related

Populate Data From Multiple Worksheets Into A Master Workbook

Feb 8, 2009

I have a master workbook with 20 worksheets. 5 worksheets in the worksbook are distributed to field reps, but the remaining 15 worksheets are not. What is the best practice for receiving the 5-worksheet workbook from the field rep and importing the data into the 20-worksheet master workbook? If I merely use Copy Sheet I am able to copy the worksheets into the master workbook but then I have to remove the pathname references in each of the copied worksheets in order to map the data in the master workbook - which is quite cumbersome.

View 9 Replies View Related

Merge Data From Multiple Workbooks Stacking Data Into Master Workbook

Aug 2, 2013

I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.

The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files.
My question is how do I write the code so the source files populate the master in a specific order.
For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.

This is the code I am using to consolidate the data:

Option Explicit
Sub ConsolidateSheetsFromWorkbooks()
'Author: Jennifer Starr
'Date: 7/12/2013
'Summary: Open all files in a folder and merge data (stacked) on all

[Code] .....

View 1 Replies View Related

Combine Several Workbooks Containing Data In Multiple Sheets Into Master Workbook?

Apr 9, 2014

I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.

View 1 Replies View Related

Excel 2010 :: Data From Multiple Workbooks Into Master Workbook

Jul 9, 2012

I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.

View 1 Replies View Related

Macro Copy Data From Multiple Workbooks Into Master Workbook

Aug 4, 2012

I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following

1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from.
2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook
3. Copy over all rows that contain the word "down" under column D titled Operational status

The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.

I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.

View 2 Replies View Related

Automatically Transfer Data From Multiple Workbooks Into Master Workbook

May 28, 2014

I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:

Sub LoopThroughDirectory()
Dim MyFile As String
Dim erow
MyFile = Dir("C:ToolFolderWorkObjectives")

[Code].....

View 9 Replies View Related

Transfer Rows Of Data From Multiple Workbooks To Master Workbook Based On Value In Row

Apr 16, 2014

I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:

A / B / C / D / E / F / G / H / I / J / K / L / M
Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total

There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number

View 12 Replies View Related

Print Workbook From Command Line

Mar 25, 2004

Is there a way to print an Excel Workbook from the command line? Is there a command line reference anywhere for Excel?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved