The following code is part of a much larger module. In the code I've set application.
screenupdating to false; however, it resets itself within 2 lines of unrelated code.
The first message box returns "Screen Updating = False", the second returns "Screen Updating = True". I have a suspicion that this is related to the Cube Analysis Add-in
I recently installed (Excel Add-in for Analysis Services).
Application.ScreenUpdating = False MsgBox ("Screen Updating = " & Application.ScreenUpdating) Application.StatusBar = ("Setting up report... Finding you selection...") 'get the user selected text and the column in which it can be found lookupVal = Sheets("Sales Leads").TreeView1.SelectedItem.Text lookupCol = Mid(Sheets("Sales Leads").TreeView1.SelectedItem.Key, 3, 1) 'the nodekeys are always "NK" & <column> & <count of nodes> so the third value in the key is the column. MsgBox ("Screen Updating = " & Application.ScreenUpdating)
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I have written a number of macros, and I typically use Application.Screenupdating = False at the start, and set it True at the end of each macro. However, I now have some big macros which call others as subroutines. This results in the screen updating for each pass thru a called macro, as the Application.Screenupdating = True statement is executed. Is there a means to repress this at the top level, or is there a better approach to take in writing code which will stop screen update for a macro, but not restart it each time the macro is called as a subroutine?
I have VBA code that hides and display columns. I have it coded in between Application.ScreenUpdating = False and Application.ScreenUpdating = True commands thinking that it will not show all the flashing and movement of columns.
I am using the following code to turn off the screen updating during code execution Application.ScreenUpdating = False Is there anything that would still show the screen updating desptite being set to 'False'?
I have a form that i am using that I would like to update at certain points in the code. I have the screenupdating set to false but it seems that this is keeping the userform from refreshing as well. Is there a way to refresh the userform without turning the screenupdating back on (because the user cannot see what is happening behind the scenes.
i have written so code that opens a spreadsheet and runs some macro from the new speadsheet and copys info over to the other spreed sheet i have Application.ScreenUpdating = FALSE at the begininnig and turn it back on at the end but it still making the screen show everything can anyone help.
Sub save() Application.ScreenUpdating = False Application.Calculation = xlCalculationManual
ChDir "P:OFFICERiskOPTIONSOptions Control FunctionRisk Analysis" Workbooks.Open Filename:= _ "P:OFFICERiskOPTIONSOptions Control FunctionRisk Analysis emplate euribor risk module.xls"
For some reason Application.ScreenUpdating = False has stopped working for me.
For testing purposes, I have freshly opened Excel (2003 SP3) and into the brand new workbook, added the following macro:
***************** Sub Test() Application.ScreenUpdating = False For i = 1 To 40 ActiveCell = i ActiveCell.Offset(1, 0).Select Next i End Sub *****************
When I run this macro, I see the individual values being written on the screen. Stepping through the code and using Watch, I can see that Screenupdating is set to False by the first line, but as soon as the Activecell is changed, Screenupdating is reset to True.
If I turn events off by adding Application.EnableEvents = false to the start of the macro, all works as expected, however I do not want to use this "workaround" as I use event driven macros.
I've got a listbox which populates a second listbox from cells on a hidden worksheet which is done through macros. Every time I select a value in the listbox, the screen " flickers" to the hidden worksheet. I want to be able to do the whole process without that "flickering". I tried using Application.ScreenUpdating = False, but it still flickers. Have I overlooked something?
Sub GetStaffteamQuery() Application.Calculation = xlCalculationManual Dim sConnParams, sSQL As String Dim dbFile, dbPath, dbName As String ThisWorkbook.Activate Sheet3.Select dbFile = "CounsellorData.mdb" dbName = "CounsellorData" dbPath = Sheet3.Range("databaselocation").Value selectedgroup = Sheet3.ListBox1.Value If VBA.Right(dbPath, 1) <> "" Then ' if last char in dbPath has no slash.................
If I'm starting in Sub #1 and I have turned screenupdating off, then later in the procedure I call a function that also has screenupdating off (and also back on at the end of the function), will I get a slight flicker here? I'm noticing a slight one, and I can only imagine that it's where the screenupdating is being triggered again. (removing the updating from the function isn't an option, because another procedure calls the same function & needs it turned off)
trying to copy both the values and the format of a certain range from one worksheet to another I am faced with two problems:
a) how can I copy something without having to previously add ".select"? (in the end I want to avoid any screen flickering)
b) how can I copy both the values and the format in one line (currently I have to use two lines)
Current problem: Below you can find a code snippet which is repitetiously launched in order to copy data(+format) from many sheets to one sheet, there is other code as well (not shown here), which is launched in between (dealing with charts and pictures). In order to avoid some screen flickering I have already included the "screenupdating=false" line, and I would like to drop the usage of any ".select" in my code, as any ".select" seems to update the screen irrespectively of "application.screenupdating=false" or not.
However, as soon as I erase any ".select" command, I get a runtime-error 1004 at the SECOND run of this code snippet here. The only way to circumvent this seems to include ".select" prior to the line causing the error. Why at the second run? Well, I think, it is because after the second run, the focus might remain with a chart and not anylonger at any cell. Is there any way executing the below code without the screen-flickering?
Sub copySample(ByVal M As Integer)
Dim wksTarget As worksheet, wksNow As Worksheet Const maxRowsConsidered=1000
Set wksTarget=Worksheets("target") Set wksNow=Worksheets(M)
A little context: Searching this forum for "sleep", "delay" or "animation" will bring up a host of threads referring to the kernel32 function, sleep. This is a great way of putting small delays into code without the potential "synchronisation" problems of application .ontime calls or the "ugliness" of multiple-thousands looping.
My question: When I call sleep (with values in the hundreds of milliseconds) several times in a macro, it seems like the computer just "gives up" screen updating after a few (maybe 50) iterations. The macro still takes the time I'd expect, accounting for all the sleeps, but it stops showing the intermediate steps and just shows the end result after the macro ends.
Is this something to do with RAM? Is there something about calling this command too much or too frequently that kernel32 doesn't like? Is my computer a useless bag of nails and spit?
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
I have a command button on the first sheet of my workbook that opens a Userform. The following stages are simplified so as to not confuse the problem I am having. The user enters a word into a Text Box in the Userform, and when they click OK (Command Button), the second sheet of the same workbook activates, and the macro finds the word from a list in Column A. It then makes that cell the Activecell and then activates the first sheet again before closing.
The problem is that I would like all that to happen with Screen Updating turned off, so the user doesn't see the sheets change. For some reason, I can't get it to work. From my research, I have read that Screen Updating should not be turned off until after the Userform opens, or if you move the Userform around the page it will work as an eraser. So I presumed I had to add to the Search Button Private Sub SearchButton_Click() Application.ScreenUpdating = False Sheets("Sheet2").Activate '\The rest of the code follows here so that when you click the Search Button the first thing it does is turn off Screen Updating. But for some reason this doesn't work.
I also tried adding the code into the sub that calls the Userform:
Sub OpenUserform() UserForm1.Show vbModeless Application.ScreenUpdating = False End Sub
I'm currently using a formula which is exactly what i want but i need it to do something additional.
The formula is: =IF(ISNUMBER(SEARCH("Level 1 ",$I:$I)),$K:$K,"")
My understanding of this formula is that the cell the formula is in then searches column I for the value "Level 1 ", if it's true it returns what is in column K, if false then it returns the cell blank/0. This is a great function and works well.
What i want to know, is there a way to add another rule on to it that instead of returning the value blank/0, it finds the next cell in the column that has a TRUE value and omits it instead.
For example: At the moment it shows: Level 1A Level 1B Level 1C (Blank Cell) Level 1D (Blank Cell) Level 1E
But i want it to show like this: Level 1A Level 1B Level 1C Level 1D (Replaces blank cell with the next TRUE value) Level 1E (Replaces cell that previously had "Level 1D" in it to the next TRUE value seeing as "Level 1D" is now above)
I don't want the cell to appear as blank.
In column K, i would only have the data for "Level 1 ", i can then copy the formula to other columns for "Level 2 " and so on. I don't need it to return the cells in alphabetical order, just the next true value in the column that matches the values in the reference column.
I am trying to compare two columns (store names) to verify if a store purchased a certain product. column a is all our stores and column c are the stores that got the product. the formula i am using is: =OR(EXACT(A2,C2:C93)) in column B and it returns a true or false value. However, when I copy the formula down column B, not only does the A value change, but so do the C values. How do I keep the c2:c93 portion of the function the changing, while the a2 goes to a3, a4, a5 etc.?
In the first, C3, the full date is entered in format dd/mmm/yy. In the second, C5, the month is entered in full, say "November".
I want in C7, to have a formula that tells me when the month part of C3 is the same as either the month in C5, or any of the other quarter ends starting from that month.
So for example, if November is in C5, then my four months would be November, February, May, and August. If the month part of C3 (=MONTH(C3)) is equal to any of these months. I want to have to enter only one of the four months though!
I want to lookup a value using * and ? and have the result tell me whether all possible values have a "yes" next to them.
Let me explain. Example.
If I have this in table1: Records Yes/No adfcjks7as Yes 91521cg N/A 215a786 N/A 9194215g Yes 2154a6 N/A 614asdff No asdf562 Yes as895as Yes a5s5d8d6 No
And I type *as in cell A1 THEN I want cell A2 to lookup "*as" in Table1[Records] and determine if all possible records have "Yes" next to them in column Yes/No. The result is "ALLYES" if its true or "NOTALLYES" if its false.
In this example the result is "ALLYES" because adfcjks7as and as895as are the only records that *as applies to and "Yes" is next to them in the same row. If there is only one possible value then it still applies.
Of course * and ? will be used in different arrangements to find possible values.
I've collected some GPS data of an athlete running and want to quantify both the number and duration of individual sprints.
In the attached xls file, there is a column for time, speed and another that returns whether the speed column is >18 kph or not. False is <18, sprint if >18 kph.
Each entry with a "sprint" means they are sprinting (running above 18 kph) and each entry is 0.2-s. Thus 5 entries added together = 1-s.
I want to know, not the total number of sprint entries but the number of sprint groupings for example.
false, false, sprint, sprint, sprint, false, false,false,false, sprint, sprint, false = two seperate groups of "sprints". I would therefore conclude that the athlete sprinted twice.
I also want to know the duration of the sprint for each of the groupings. For example based upon each entry being 0.2-s, the first sprint grouping would total 0.6-s and the second grouping 0.4-s.
I have two groups of numbers. The first group is x amount of rows and each row has 6 numbers. The second group is x amount of rows and each row is 7 numbers.
Each number from the first group needs to check to see if it exists in the second group. If it does exist, the cell should change to a highlighted cell, or switch to an 'X' or something else that identifies it has been matched. Note: Numbers may be duplicated in both groups. Is there an easy way to do this, or will it involve programming? I'm attaching an example of the "group" setup.
