I have a form that i am using that I would like to update at certain points in the code. I have the screenupdating set to false but it seems that this is keeping the userform from refreshing as well. Is there a way to refresh the userform without turning the screenupdating back on (because the user cannot see what is happening behind the scenes.
View 7 RepliesI have a command button on the first sheet of my workbook that opens a Userform. The following stages are simplified so as to not confuse the problem I am having. The user enters a word into a Text Box in the Userform, and when they click OK (Command Button), the second sheet of the same workbook activates, and the macro finds the word from a list in Column A. It then makes that cell the Activecell and then activates the first sheet again before closing.
The problem is that I would like all that to happen with Screen Updating turned off, so the user doesn't see the sheets change. For some reason, I can't get it to work. From my research, I have read that Screen Updating should not be turned off until after the Userform opens, or if you move the Userform around the page it will work as an eraser. So I presumed I had to add to the Search Button
Private Sub SearchButton_Click()
Application.ScreenUpdating = False
Sheets("Sheet2").Activate
'\The rest of the code follows here
so that when you click the Search Button the first thing it does is turn off Screen Updating. But for some reason this doesn't work.
I also tried adding the code into the sub that calls the Userform:
Sub OpenUserform()
UserForm1.Show vbModeless
Application.ScreenUpdating = False
End Sub
In Excel, I have created a userform where a user inputs parameters into various textboxes. A simulation runs based on these user entered values. All the VB code is in this form. There are some textboxes and charts that are supposed to get updated as the simulation runs so that the user can view the parameters change as the simulation happens (it is a "do loop").
Everything is fine except the charts and textboxes don't display the most current value. They display the starting value during the "do loop " execution. Once the do loop quits, they then display the final values and chart.
I have me.repaint and chart.refresh inside the do loop to display the most recent values. none work, as far displaying the most current values.
I have a userform for data entry. I am able to make codes for Add ( Add entry to database), clear ( Clear userform ) , Cancel (Exit userform). I have some more buttons and functions to be assigned to them but not able to write code .
Need codes for :
1) Have search box which searches Mat id in the complete database and returns value in the search result listbox. When we click on the result in listbox , the userform values are filled with the values that the mat id has . Then if user wishes he can update teh details for that mat id , and click on update button . the data is updated in the database. Or he can delete the entry from database by clicking on delete button.
2) Have arrows which will navigate through database ( need macros for that ) .
USERFORM.xlsm
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
Not sure if I am linking this correctly but here it goes...http://www.excelforum.com/excel-prog...ification.html
This is a previous post link that is now solved but I have a new question based on the code in the post. I would like to know how to add a search and update ability to the user form I have created. I am newb with user forms so I apologize in advance for my lack of knowledge.
And yes I know the way it is set up now it is depositing data in two different locations; this is for a specific purpose.
I have a table recording details of attendees of courses. There are common and variable entries columns) for each attendee (row)
Common: Venue, Date, Teacher, Course.
Variable ( and specific to attendee): Role, Place of work,
So if there are 40 attendees then currently I have to enter the common fields for all attendees 40 times !!
Is there a way of having input boxes/ user form which asks for the common fields and then automatically updates the table?
I have a form that allows users to enter details and retrieve details of data already entered. How can I make it so users can update the data in the subform?
View 3 Replies View RelatedI have developed a functional User Form that works like a charm. The form will Add New Records to my database and Get Next and Get Previous records. This all works like a charm. I am stuck on how to search by Last Name or Employee Number and then to Update the Existing Record. If I change anything in an existing record as the VBA is written today, my only choice is to add a new record to the end of the database. I have added Command Buttons, but I'm lost as to how to write the code. Here's what I have so far:
VB:
Dim currentrow As Long
Private Sub cmdGetNext_Click()
Range("A2").Select
ActiveCell.End(xlDown).Select
lastrow = ActiveCell.Row
[Code]...
I have been playing around with this and are totally baffled,userform service,enter pl094 in combobox1 ,first part looks up sheet1 and works well.
If I change overhauled date it changes on sheet1 ,but will not write to sheet repairs,has done in the past as you can tell from entries, have tried irow and c.row but for some reason will not write any more entries.
I have a userform that populates a list of names. As a name is added in column "D" column "C" updates a reference number using the formula =IF(D2="","",C1+1). I can get the formula to copy to the spread sheet but as a new name is added the formula stays the same. If I enter a name in cell D2 everything is fine but when I make the next entry in row 3 the same formula is entered as if it were text and not as a formula. so I wind up with a column of formulas that all say =IF(D2="","",C1+1) reguardless of what row the formula is in.
View 4 Replies View RelatedI have a time sheet which is used by around 15 people. Part of the timesheet is a userform which adds a new sheet and names it with the seleted month and year. I have made a few changes to my timesheet which I wish to update on other peoples sheets. I am going to send out a speadsheet with a macro that people can run and it will automatically make the changes to their timesheet. I have done all the work for updating the various formats and formuals but I have hit a bit of a brick wall when trying to change the code on a user form via a macro.
It would be great if I could either overwrite all of it or add a some lines of code from a specific line number.
The following code edits/adds the value of textbox2 to its corresponding cell. The problem with it is that after updating, the values are unrecognizable and can't be used for further calculations.
Code:
With LB
LI = .ListIndex
Range(.ListFillRange).Cells(LI + 1, 2).Value = TextBox2.Value
[Code]...
Although it does not gives an error it makes even more values in the column unrecognizable.
I have made this userform.
What i want to be able to do is select an item from combobox (comboCPM) and then be able to check off some or all of the checkboxes then up date that line items record.
Check box value can be a "x" or "true" dont really care.
I have gone though the combox excercise at www.contextures.com, but when I try to use that logic in my spread sheet I get nothing in my drop down... just blank spaces
I am writing code that when you click "OK" on the userform the macro should copy the user entered values which are already in a worksheet into another worksheet. Once the values have been copied over I would like the form to clear the values.
The code that I have so far is giving me a Method " Range" of object'_Global' failed error.
Sub UpdateVariables()
Dim HomeAddress
Dim CellAddress
Sheets("UserInput").Select
If Range("E1") = 0 Then Exit Sub
For Each Cell In Range ("E4:E496")
Cell.Activate
If ActiveCell.Value = 1 Then
HomeAddress = ActiveCell.Address
CellAddress = Variables & "!" & ActiveCell.Offset(0,1).Value
Range(CellAddress).Value = ActiveCell.Offset(0,-1).Value
Range(HomeAddress).Select
End If
Next Cell
End Sub
I have been working on a userform for entering in and editing data in a spreadsheet, but I'm stuck with the code for updating the edited data.
I have two pages on the Userform, one for adding a new entry, and one for editing an existing entry.
On the page for editing an existing entry, I have a combobox that displays information in the text boxes based the selection. What I need to be able to do is click save once I have made changes to the information in the text boxes and then have that information saved in the spreadsheet.
I have figured out all of the other buttons in the userform, but I am struggling with this last one. Here is my spreadsheet with some sample information entered in : ExcelFile.xls
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB:
Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub
[Code]...
I came across a userform which was perfect for my needs, as I only had to create additional fields, which I did and have attached. However, since I have more than 10 fields, I was getting an error with respect to the listbox function, where it stated that the list property could not be found. I gathered from the searches I did, that this is the max limit for this particular function. I have been unsuccessful in finding a solution, partly because I don't know very much and I'm not understanding how to incorporate some of these solutions into the vba code. I've created simple userforms before, but this one is a little more advanced than my current capabilities.
View 2 Replies View Related I have a userform I attached here with 3 combo boxes where a user can pick districts and schools, etc. When they click ok, the various tabs in this macro enabled workbook will "refresh" with the metrics for that entity)combination of picks from form) across the board. Each tab will have multiple pivot charts/tables so the filters will need to be addressed. I've been looking for code to kind of match this scenario. I've seen some that kind of in the ballpark, but due to the size and complexity, I suspect this will be extensive, right?
Parameter Selection.jpg
I am trying to make a userform that will update a list in the spreadsheet. Basically if a user types into a multiline textbox numbers (separated by line) like so:
5
10
15
20
then the macro will paste that data at the end of a list so that each number is in a new cell. The only thing I have that comes close is Range("A1").value = listbox1.value The problem with this is that it will input the entire list into one cell. I have attemped various things, like trying to get the list into the clipboard and pasting, but I haven't really had much luck.
I have to append the cell value with a user input string in to the same cell.
i.e, if the user types "Issue" in the cells ranging C1:C200, I would like to make a mandatory issue description to be entered by the user. So a user form with text box and command button was introduced which should append the cell value with the user input in the text box.
The issue that I have is with the cell selection within the code for the form.
ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"
For example if the user tabs out from cell C3, the output from the userform will be written to D3 ? or if the user hits Enter key to come out, the output will be written to C4 and so on.
How can I make ure the output is going to the same cell?
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Application.Intersect(Target, Range("$C$1:$C$200")) = "Issue" Then
Dim MyForm As New UserForm1
MyForm.Show
Else
Exit Sub
End If
End Sub
'Code for the userform is below:
Private Sub CommandButton1_Click()
If TextBox1.Text = "" Then
' the user input is mandatory
MsgBox "Issue Details is mandatory", vbCritical, "Mandatory Field"
TextBox1.SetFocus
Else
' append the cell value with user input in the text box
'****issue is here in the next line
ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"
Hide
End If
End Sub
I have a sheet with names and subdividers (Ent, Ver) on the columns, and dates on the rows. I am trying to make a form update the sheet when the name, ent or ver, and date match. I have attached a copy of my sheet to help explain that. I don't know much vba, but I can make a userform just fine. Trouble with most places is that the userforms only update based on empty cells, not based on more complex criteria.
View 7 Replies View RelatedI have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies View RelatedI have a sheet that creates a list of columns that may need to be updated or edited as necessary. Column A is a list of names that are alphabetized automaticaly from column D, so any change in column D would need to be reflected in column A. The attached sheet will (I hope) make things clearer.
I need a code for vinculating a user form and perform some searchings on a excel database.
For further details see attached file.
I created a user form in which some infromation is requested in order to search on excel database, I need a macro to search, display and update this data/information.
As an example, if i need to find the part number "C23138810-1" using the button search database and contains or match options, then displays all the information on the user form, this information is located in the same row where the part number is. Then, if some change is required, update is by clickig button "Update Data", and then if require "find next" item to review or update.
I have written a number of macros, and I typically use Application.Screenupdating = False at the start, and set it True at the end of each macro. However, I now have some big macros which call others as subroutines. This results in the screen updating for each pass thru a called macro, as the Application.Screenupdating = True statement is executed. Is there a means to repress this at the top level, or is there a better approach to take in writing code which will stop screen update for a macro, but not restart it each time the macro is called as a subroutine?
View 2 Replies View RelatedI've added a sort descending With Activesheet in this macro How can I better enable the completion before Application.Screenupdating = True.
Sub InsertRows_Xslopes25cb2()
Dim LR As Long, i As Long
Unload UserForm8
Application.ScreenUpdating = True
UserForm9.Show vbModeless
DoEvents
Application.ScreenUpdating = False
LR = Cells.Find("*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
On Error Resume Next
Range("F9:F" & LR).SpecialCells(xlCellTypeBlanks).Delete shift:=xlShiftUp
Range("G9:G" & LR).SpecialCells(xlCellTypeBlanks).Delete shift:=xlShiftUp
On Error GoTo myErr
I have VBA code that hides and display columns. I have it coded in between Application.ScreenUpdating = False and Application.ScreenUpdating = True commands thinking that it will not show all the flashing and movement of columns.
View 9 Replies View RelatedI need to write some code to update a label everytime the textbox data is edited. I have this code so far but it is returning an object error. NineV refers to the text box and and ninelabel refers to the label. This is the code:
Code:
Private Sub NineV_change()
Dim nivevalue As Integer
ninevalue = (((GP / 31.1035) * 0.255) * NineV.Text)
NineLabel.Caption = "£" & ninevalue
End Sub
I am using the following code in my Macro
Application.ScreenUpdating = False (I set it to "True" at the end of the sub)
But I can still see Excel changing tabs etc.