IF All Possible Values Are True THEN
Jan 20, 2010
I want to lookup a value using * and ? and have the result tell me whether all possible values have a "yes" next to them.
Let me explain. Example.
If I have this in table1:
Records Yes/No adfcjks7as Yes 91521cg N/A 215a786 N/A 9194215g Yes 2154a6 N/A 614asdff No asdf562 Yes as895as Yes a5s5d8d6 No
And I type *as in cell A1
THEN I want cell A2 to lookup "*as" in Table1[Records] and determine if all possible records have "Yes" next to them in column Yes/No. The result is "ALLYES" if its true or "NOTALLYES" if its false.
In this example the result is "ALLYES" because adfcjks7as and as895as are the only records that *as applies to and "Yes" is next to them in the same row. If there is only one possible value then it still applies.
Of course * and ? will be used in different arrangements to find possible values.
View 9 Replies
ADVERTISEMENT
Aug 2, 2009
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
View 8 Replies
View Related
Jan 15, 2014
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
View 7 Replies
View Related
Jun 28, 2007
I'm looking for some help. I need a function that can check if each of two seperate values is less than one. If less than one then divide by 2. Then give me the average of these two values. So it could be that it takes 0.5/2=0.25 for one value and 3 for another to give me the average of 1.625.
View 9 Replies
View Related
Mar 13, 2013
In the attached spreadsheet I would like to create a list of part numbers if column D E & F all have a #N/A value. Right now I'm using a True/False but this list contains around 3000 items and I don't want to have to scroll down to find the True values. Is there a way I can just create a list of corresponding part numbers to the True Values?
SAMPLE.xlsx
View 7 Replies
View Related
May 21, 2013
I'm using multiple data tables to run sensitivity analyses on a very large model. At the end of the analysis, I've got a matrix that tells me which scenarios are TRUE or FALSE (based on multiple criteria). I'm looking for an elegant way to extract the combinations that give TRUE.
Column1
Column2
Row1
FALSE
TRUE
Row2
TRUE
FALSE
Desired Output
True Scenarios:
R1, C2
R2, C1
View 1 Replies
View Related
Sep 26, 2013
I need to make an IF statement that when it's true it need to retrieve the values from a different column. With what function is it possible to just retrieves values?
I need to return the value from pivot table. Forgot to mention this.
View 4 Replies
View Related
May 13, 2008
I'm trying to find the sum of a range of values based on multiple criteria, and the criteria is that the fields all have to be identical, then sum them. I've attached a brief example spreadsheet that has the fields
A=City
B=State
C=Values
What I want the formula to do is first find the range of all the matching states, then find the range of all the matching Cities within the states, and then sum the values based on them having matching city values.
I've been able to do that with one criteria using SumIf, I'm not sure if this will help paint an image of what I want to do:
=ROUND(SUMIF($B$3:$B$11,$B$3:$B$11,$C$3:$C$11),0)
But I can't figure out the way to do multiple criteria against itself. Most of the results I get from Google using multiple criteria are using a set few values, and I can't seem to figure out how to alter those methods to work with my situation.
View 9 Replies
View Related
Feb 27, 2014
I need to count values of numbers in a row next to text(True ot False) Like:
A1____A2
True | 150
True | 66
False| 40
True | 78
False | 56
Output:
True: 294
False: 96
View 3 Replies
View Related
Jan 8, 2012
I have long text values that include names in cells A1:A100.
In cell D1:D10, I have a list of names that I would like to check if any of them is found in each of the cells in A1:A100 and if yes, return TRUE in column B.
So in a way, what I need is a a bit like the SEARCH function, only that I need to find multiple FIND_TEXT values. If just one of the names in D1:D10 is found, the formula should return TRUE.
View 4 Replies
View Related
Sep 19, 2012
I have values in A1 through A4.
I have a string of text in cell B1.
In C1, I need a formula that displays TRUE if any of the 4 numbers from A1 through A4 are contained within the text in B1. If not, FALSE will be displayed.
Been messing with SEARCH and FIND, but not getting it to work.... not sure if those are the functions I need.
View 9 Replies
View Related
Jul 25, 2014
I am designing a spreadsheet for my colleagues and I have run into a problem. Range U16 tu U and the first blank row has values TRUE or FALSE. The problem is you will never know if it's U16:U21 or U16:U90. The thing is to come up with a formula (no vba) that will count all TRUE values in that range. I found a formula on the internet to find the first blank column: =MATCH(TRUE,INDEX(ISBLANK(U16:U300),0,0),0) + 16 - 1
The formula works great and if I put it in, say, cell P2 it will return the correct result.
Now, the cell K2 has the following formula: =COUNTIF(U16:U300,TRUE). It Counts incorrectly. I do not want it to run to U300 but to whatever P2 returns. How can I do this?
View 9 Replies
View Related
Sep 25, 2009
I have number data in columns F through AK. In column AL I want a formula that will look in columns F through AK from the left to right. Once it identifies a positive value I want the formula to identify if after that positive number there are any occurances where there are 6 0's in a row (anywhere up until column AK). The formula can return a True or False. I want to drag the formula down across many rows of data. If the entire row contains 0's, I do not want it identified as a TRUE
View 9 Replies
View Related
Jan 28, 2010
I have a document passed to me that includes information pulled from an internal system.
I want to use some basic formulas to show Totals, averages etc.
However, the SUM function does not work on the data provided unless I select the cell (As if to edit the text) and the press enter.
Is there a quicker way of selecting all of the cells in Column A for example and performing this function on mass, rather than selecting each cell individually.
I have attahced a similar sample copy - My SUM formula is show in cell B15.
View 7 Replies
View Related
Apr 9, 2014
I have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.
View 8 Replies
View Related
Apr 6, 2014
I have a checkbox where the values are reflected as True/False in a seperate column, what i simply want to do is take the value from one cell, and add 10% of the value each time a value becomes True.
For example in this value column after the check box has been filled out it might look like this:
False
True
True
True
False
False
False
The cell then needs to take the figure, lets say, 100, add 10%, then add 10% to 110, then again and so on for however many "True" statements are in the column.
I have tried with no success with various SUM/SUMIF/COUNT/COUNTIF/IF etc cant seem to get it to work, im not sure the cell refreshes correctly after the checkbox is filled out and its not registering the new "True" value as by default its all set to "False".
View 7 Replies
View Related
Nov 15, 2006
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies
View Related
Jan 26, 2010
I need to figure out how to match three values on the "source info.xls" file attached to the "PFG FILE.xls" that is also attached. In column A in the "Source info.xls" file the formula will need to match the yellow column, then the green column, then the red column. keep in mind that the attached files are just a small subset of data. The "PFG File.XLS" is actually 150K rows long.
View 5 Replies
View Related
Jan 8, 2013
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
View 3 Replies
View Related
Dec 16, 2008
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
View 5 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Nov 4, 2008
how to change the default output values "FALSE" and "TRUE" for the AND() function ? Let say I want to change them to "FAIL" "PASS".
View 2 Replies
View Related
Aug 3, 2014
I'm currently using a formula which is exactly what i want but i need it to do something additional.
The formula is: =IF(ISNUMBER(SEARCH("Level 1 ",$I:$I)),$K:$K,"")
My understanding of this formula is that the cell the formula is in then searches column I for the value "Level 1 ", if it's true it returns what is in column K, if false then it returns the cell blank/0. This is a great function and works well.
What i want to know, is there a way to add another rule on to it that instead of returning the value blank/0, it finds the next cell in the column that has a TRUE value and omits it instead.
For example:
At the moment it shows:
Level 1A
Level 1B
Level 1C
(Blank Cell)
Level 1D
(Blank Cell)
Level 1E
But i want it to show like this:
Level 1A
Level 1B
Level 1C
Level 1D (Replaces blank cell with the next TRUE value)
Level 1E (Replaces cell that previously had "Level 1D" in it to the next TRUE value seeing as "Level 1D" is now above)
I don't want the cell to appear as blank.
In column K, i would only have the data for "Level 1 ", i can then copy the formula to other columns for "Level 2 " and so on. I don't need it to return the cells in alphabetical order, just the next true value in the column that matches the values in the reference column.
View 14 Replies
View Related
Nov 19, 2008
I am trying to compare two columns (store names) to verify if a store purchased a certain product. column a is all our stores and column c are the stores that got the product. the formula i am using is: =OR(EXACT(A2,C2:C93)) in column B and it returns a true or false value. However, when I copy the formula down column B, not only does the A value change, but so do the C values. How do I keep the c2:c93 portion of the function the changing, while the a2 goes to a3, a4, a5 etc.?
View 8 Replies
View Related
Oct 23, 2007
I have two cells, each with month values in them.
In the first, C3, the full date is entered in format dd/mmm/yy. In the second, C5, the month is entered in full, say "November".
I want in C7, to have a formula that tells me when the month part of C3 is the same as either the month in C5, or any of the other quarter ends starting from that month.
So for example, if November is in C5, then my four months would be November, February, May, and August. If the month part of C3 (=MONTH(C3)) is equal to any of these months. I want to have to enter only one of the four months though!
Is there a formula that allows me to do this?
View 9 Replies
View Related
Dec 5, 2007
i have used the following formula
=IF(OR(LEFT(J2)="3",L2>=15,L2
View 9 Replies
View Related
May 29, 2009
Is there another formula that I could use that would return YES or NO instead of TRUE or FALSE? This is the formula that I am currently using.
=COUNTIF(BG_WADDRESS,D2)>1
View 9 Replies
View Related
Nov 8, 2009
I guess the answer for this is simple but can't find the answer.
AB1FALSE IF TRUE THAT A4 = TEST12TRUE IF TRUE THAT A4 = TEST23FALSE IF TRUE THAT A4 = TEST34TEST2IF ALL ARE FALSE = ""
Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Feb 3, 2010
I've added a sort descending With Activesheet in this macro How can I better enable the completion before Application.Screenupdating = True.
Sub InsertRows_Xslopes25cb2()
Dim LR As Long, i As Long
Unload UserForm8
Application.ScreenUpdating = True
UserForm9.Show vbModeless
DoEvents
Application.ScreenUpdating = False
LR = Cells.Find("*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
On Error Resume Next
Range("F9:F" & LR).SpecialCells(xlCellTypeBlanks).Delete shift:=xlShiftUp
Range("G9:G" & LR).SpecialCells(xlCellTypeBlanks).Delete shift:=xlShiftUp
On Error GoTo myErr
View 9 Replies
View Related
Apr 2, 2014
In Column A I have the following values below.
Y
Yes
N
No
Questions how do you created a formula, Example If Cell A2 = Y or Yes Cell B2 will be 1, if not then 0.
Currently I was successful in writing this formula =IF(BB2="Y","1","0") but this formula only returns the value for Y, not Yes
View 3 Replies
View Related
