The below code was working absolutely fine yesterday but since this morning I am getting an error: "Insert method of range class failed" at the following line:
[Code].....
Here is the complete code.
[Code].....
I have googled it and didn't find any workable solution. My DataEntry sheet is unprotected.
I have a macro that opens a specified woorkbook that changes every month. There are formulas which are pasted to range I1 of the new workbook to calculate the totals on this sheet. Everytime i run the code though, I get an error that says "Select method of range class failed" and Range("I1").Select is apparently the error.
View 7 Replies View RelatedWhy I'm getting the above error when I try to copy and sort data into a workbook?
I'm using this:
Code:
Sub GetData1()
Dim SaveDriveDir As String, MyPath As String
Dim FName As Variant
SaveDriveDir = CurDir
MyPath = Application.DefaultFilePath 'or use "C:Data"
[Code] .......
To import the data and then these lines to copy the unique records to a range:
Code:
Sheet33.Range("C1").Select
Sheet33.Range("C1:C1000").AdvancedFilter Action:=xlFilterCopy,
CopyToRange:=Sheet33.Range("S1"), Unique:=True
But the above lines are highlighted when I get the error.
Macro has been working fine for ages suddenly have received this consistently?
It's not debugging to allow me to see the route of the problem.
i've googled and seen it's normally a use of select but can't see any issue in my code or understand why it would work for months and now stop.
note: also after i click Ok on the error the macro seems to continue running and data is pulled through. ...but this message comes up every time so it's questioning the reliability of the data it's pulling.
Check Personnel Number in Data Tab with Personnel Numbers in Insert Tab. If they match copy that row from Insert Tab and paste it into the next available row in the Moves Tab.
Column Descriptions: Name, Age, Phone Number, Personnel Number, Notes
Worsheet Tabs: Data, Insert, Moves ....
I found the following for something that I was searching for on the web.
Selection.Columns.PasteSpecial Paste:=8
My question is two fold, 1) What does the '8' mean? 2) Is there someplace that tells me what other numbers for PasteSpecial mean?
This solved a problem that I had when trying to do a PasteSpecial for Column Width. What I had been trying was the following:
Selection.PasteSpecial Paste:=xlColumnWidths, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
But I would get the error run time error '1004', PasteSpecial method of Range class failed.
This script is resulting in:
Run-time error '1004'
PasteSpecial method of Range class failed.
[Code] .....
It highlights
[Select Code] .....
when I hit debug.
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2()
Dim xls As Excel.Application
Dim oWB As Excel.Workbook
Dim tmp As String
Dim ws As Excel.Worksheet
[code]....
My code is :
Public Const GRAPH_PutData_COL1 = "A"
Public Const GRAPH_PutData_COL2 = "B"
Range(GRAPH_PutData_COL1 & "1").Sort Key1:=Range(GRAPH_PutData_COL2 & "1"), _
Order1:=xlAscending, _
DataOption1:=xlSortTextAsNumbers
it is showing error, "sort method of range class failed error 1004"
Above error only showing when first record is empty...
When I try to run following code, I get error
Run-time error '1004': Select method of Range class failed
Workbooks("Book1").Worsheets("Sheet1").Range("A1").select
however if I split the code like below it works perfectly
Workbooks("Book1").Worsheets("Sheet1").Select
Range("A1").select
As part of a larger Macro I have the following Code:
Range("X2").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]>0,""Yes"",""No"")"
Range("X2").Select
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
Range("X2", "X" & lastRow).Select
Selection.Copy
The code works fine when I have more than two rows of data that I am manipulating but gives me an Run Time Error - AutoFill Method of Range Class Failed at the following line:
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
When I have only one row of data I get the Run time error.
Any code that will allow me to process the data if I have one row of data as well.
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
What do I need to do to fix this?
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed"
have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I lost 2 days trying to discover the bug in my program, but I coudn't find the right answer.
How can I activate the AutoFilter to show me the rows selected with "YES" ?
This is the code... The compiler stops always at the command Selection.AutoFilter.
I am encountering this error when I try to run code I have written on my own machine. I am working with all unprotected sheets, and I am running Excel 2007. All of the sheet exist.
Here is my ....
This very simple macro in Personal.xlsb is driving me crazy!
I want to paste a previously selected and copied range at the current position as values. The range will seldom be the same as previously, and the position where it will be posted will be random too.
The code is: ...
I found the following code on your forum, but get the following error:
Run time error '1004'. Autofill method of Range class failed.
The error occurs when the spreadsheet either have 1 row of data completed or no data, can I get code to ignore the autofill when I only have 1 row or no rows completed in various spreadsheets. I have attached a copy of the spreadsheet.
This file has been running just fine....
But now I got this
Run Time error '1004':
PasteSpecial method of Range Class failed.
Sub ResetMacro()
Range("G26").Select
ActiveCell.FormulaR1C1 = "=Template!RC"
ActiveWorkbook.Sheets("Template").Range("G26:AE86").Copy
ActiveWorkbook.Sheets("Portfolios").Paste
Selection.AutoFill Destination:=Range("G26:AE36"), Type:=xlFillDefault
Range("G26:AE36").Select
Selection.AutoFill Destination:=Range("G26:AE86"), Type:=xlFillDefault
Range("G26:AE86").Select
End Sub
RunTime Error 1004: AutoFill method of range class failed
Takes me to the code and highlights in yellow the line in bold.
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LChangedValue As String
Dim LTestValue As String
Dim smessage As String
'Test first 7 rows in spreadsheet for uniqueness
Lrows = 8
LLoop = 2
'Check first 7 rows in spreadsheet
While LLoop <= Lrows.........................
I get the following error: Run-time error '1004': Select method of Range class failed at the following code line:
Worksheets("Sheet1").Range("A6").Select
I am using the following code and I'm getting a Run-time error '1004' error. When I reconstruct the macro one line at a time and run the macro between adding each new line - no error. After reconstructing the macro in its entirety, I can run it once with no error. However, if I try to run it again immediately after that, I get the error and I keep getting the error every time I run it from there on. I dont understand how it can work once and then stop working. Here is the full
Sub MoveToRoster()
ActiveSheet. Unprotect
Dim item As Long
Dim myString1 As String
Dim myString2 As String
Dim myString3 As String
item = InputBox("Please Confirm The Row Number Of The Child To Be Moved To The Roster.")
myString1 = "c" & item & ":e" & item
myString2 = "g" & item & ":n" & item
myString3 = "c" & item & ":e" & item & ",g" & item & ":p" & item ..........................
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
View 3 Replies View RelatedI have a macro that works by pasting formulas into cells and then pasting over them with the values produced by the formulas. It works fine for 500 iterations then crashes at this line:
View 8 Replies View RelatedMy workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View Related1.) I have excel 2007 and when I recorded the macro yesterday it worked just fine, but today it's coming up with the box to update values. The macro is set to open up the vendor assignment sheet and do a vlookup against the clerk and then return the information to the original sheet and then copy paste special values. 2.) Today it's also doing the calculating thing in the corner using 2 processors which it has not done before. 3.) Run-time error '1004': PasteSpecial method of Range class failed.
[code]' Keyboard Shortcut: Ctrl+r
'
Dim OriginalSheet As Workbook
Set OriginalSheet = ActiveWorkbook
Columns("B:B").Cut
With Columns("A:A")
.Insert Shift:=xlToRight
End With
[code]....
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code:
Sub colfrmadd()
Range("A1").CurrentRegion.Select
colcnt2 = Selection.Columns.Count
[Code]....
this is some real simple code but for some unkown reason it keeps failing on me..
Sheets("All Work").Select
Cells.Select
Selection.Copy
Sheets("Sheet3").Select
Cells.Select
ActiveSheet.Paste
Sheets("All Work").Select
The second Cells . select doesnt work for some reason when i attach it to a button on the work sheet and i get the message
"runtime error "1004"
select method of range class failed"
but when i run just the macro it all goes smooth.
I am trying to filter and copy from masterlist to wholesalecertified. The data is actually pasted to WholesaleCertified, however, I got error 1004.
Sub Refresh()
With Application
.ScreenUpdating = False
.DisplayAlerts = False
Sheets("WholesaleCertified").Select
Cells.Select
Selection.ClearContents
Sheets("MasterList").Select................
I have a pretty simple macro that I recorded and attached to a button. The macro is:
Sub Paste_Data()
Cells.Select
Selection.ClearContents
ActiveSheet.PasteSpecial Format:="Text", Link:=False, DisplayAsIcon:= _
False
Range("A3").Select
End Sub
The user opens the file that contains this macro, then runs a report from a website that dumps into an excel file. They copy the data from the Book1 output, then click the button to paste it into the template. If done this way, it works fine.
However, if they run the report and get Book1 THEN open the file containing the macro, they get a run-time error 'PasteSpecial method of Worksheet class failed' on the 'ActiveSheet.PasteSpecial... line
