Once the intended chain of actions is performed, normally EXCEL would go on to display the contextual menu, (which is its standard right-click action when no macros are involved).
Since I don’t want my macro operation to end with that menu covering part of my screen, I have the macro ‘type’ in ESCAPE, through one of these lines:
I'm trying to access one of my custom menus through a macro.
The keyboard commands are
alt, n, f
and
alt, n, g
I have these lines of
Range("A31").Select
SendKeys "%nf", True
SendKeys "%ng", True
All this seems to do is put the letters f and g in cell A31!
I have a simple macro that from Outlook Express sends emails, with the last code line to mimic ALT+S on the keyboard to send the message
Application.Wait (Now + TimeValue("0:00:02"))
Application.SendKeys "%s"
Yesterday I needed to install some new software that required at the end reinstalling of Microsoft Redistributable 2005. Not sure if for that reason but now the last line (the SendKeys) is not sending the email automatically anymore. What happens is:
-the email message windows pops up but is not being sent unless i do it manually (if i get rid of the two seconds pause ahead of that)
-have a VB error message that takes me before the SendKeys line (if I keep the two secs wait ahead of that)
It looks to me that either:
-the pc is not active anymore on the email message therefore the SendKeys doesnt work
-somehow the instruction finds the "door" shut by something else
-worse of all, the software has messed up with those send keys commands (tried to reinstall it but to no avail)
this is the code i'm using but sometimes it runs sometimes it runs incorrectly; i've been told that sendkeys is not a good choice and i should use API but i'm just studying VB6 and i do not know what is API; so i need a code to copy and paste in a module this is the code with sendkeys that i need insterad with API
Sub b()
Shell "C:Program FilesEquisThe DownLoaderDlwin", vbMinimizedFocus
SendKeys "%{T}", Wait:=True
SendKeys "{o}", Wait:=True
SendKeys "{A}", Wait:=True
SendKeys "{DOWN}", Wait:=True
SendKeys "{TAB}", Wait:=True
SendKeys "C:Documents and SettingsfrancoDesktop", Wait:=True
SendKeys "{TAB}", Wait:=True
SendKeys "matrice1.txt", Wait:=True...............
A theoretical question following an empiric result.
For the command “SendKeys”, for instance, take these two lines:
I am trying to use a macro to automate the use of alt key.
my code looks like this-->
Private Sub CommandButton1_Click()
For i = 0 To 10
Range("A" & i).Value = ActiveSheet.SendKeys("%" & i)
Next i
End Sub
This code is to enter the value of ALT+1...ALT+10 to column A
I am using SendKeys in a VBA script to activiate 2 Add-In functions when a worksheet is activated. The code I am using is:
Private Sub Worksheet_Activate()
Application.SendKeys "%GR"
Application.SendKeys "%GH"
End Sub
Whilst this code works fine as is I would like to provide the user with some progress information either with a message box or via the status bar. The first command refreshes data from an external source and the second hides unwanted rows and columns. I do not have access to modify these add-in functions.
I have tried:
Private Sub Worksheet_Activate()
Application.StatusBar = "Refreshing data in progress ..."
Application.SendKeys "%GR"
Application.StatusBar = "Hiding rows and columns in progress ..."
Application.SendKeys "%GH"
Application.StatusBar = False
End Sub
However, the system does not wait for the sendkeys commands to complete before changing the status bar message so it flashes them on and can hardly be seen
I would also like to turn screen refresh off to speed up the process time however the Application. ScreenUpdating function appears to be ignored.
Ive put together some code that sendkey values to another app. I'm having trouble now looping throught a worksheet and sending the keys of each cell.
For example ill used range a1:c4 I like to have a loop that moves to a1 and takes the value and sendkeys then b1 sendkey value.
I would like to emulate hitting the Alt+Ctrl+"Print Screen" button on the keyboard with the following code. I know there are some restrictions around using the PrintScreen with the SendKeys, but I'm hoping I can still figure out how to make this work.
Following is the first part of a larger macro I've set up. If I can just get this to work, that would be perfect.
Sub PrintTheScreen()
Application.SendKeys "^%" & "PRTSC"
End Sub
SendKeys "^F"
would work but it doesn't any ideas / alternatives?
Sub ExcelOptionDialogSendkeys()
Application.SendKeys "{ESC 5}%TO"
End Sub
But if you happen to want to assign it to a Ribbon button click...
Sub rxExcelOptionsDialog(control As IRibbonControl)
Application.SendKeys "{ESC 5}%TO"
End Sub
the sendkeys method just doesn't seem to work under any circumstance.
I used to run a macro on Win XP - where in I open a Web browser and then Send keystroke to Open new ones - Which was working fine. But now when i use the same macro in Vista it gives me a "Error - 70 : Permission Denied" @ sendkeys.
Option Explicit
Public myIE As Object
Sub OpenIE()
Set myIE = CreateObject("InternetExplorer.Application")
myIE.Navigate "www.ozgrid.com"
myIE.Visible = True
Application.Wait (Now + TimeSerial(0, 0, 5))
SendKeys "^N" ' to Open New Window
End Sub
What i require now is I need to Open IE - 7 - Which i am able to do and then open several Tabs with different URL's
I have created some code that directs me to a web page, and i use send keys to navigate my way to the input field. In this input field I am trying to put a cell value in a range use send keys to download the file, and the repeat the process for the next cell.
Here is my code so far, it does everything right up until pasting the copied cell into the input section of the web page - the issue is it is pasting nothing
VB:
Shell "C:Program FilesMozilla Firefoxfirefox.exe " & "https://website.com", vbMaximizedFocus
Application.Wait Now + TimeValue("00:00:05")
SendKeys "{TAB}"
' Input username
[Code] .....
I need to use sendkeys to insert code into codepane in VBE.
I use sendkeys "MyFunction()", but the "()" doesn't show up just "MyFunction"
I use sendkeys "MyFunction" & chr(40) & chr(41), still only get "MyFunction"
I was looking at Colo's website for the Application.SendKeys method, http://puremis.net/excel/code/039.shtml ,so that I can speed up a page/print setup macro that I have.
I was partially successful in setting this up, but I did notice that there was no argument number in that method for setting up the "Fit to x Pages Wide" and "y Pages tall".... I really need that functionality....
I saw something here that is supposed to get the zoomfactor : http://groups.google.com/group/micro...8d0?scoring=d& but I can't seem to incorporate it into my code so that it works.
Is there an Argument I can set up to get those?
Here is my code so far:
Sub ElecECNPrint()
Application.SendKeys "{ENTER}", False
Application.Dialogs(xlDialogPageSetup).Show _
Arg1:="", _
Arg2:="", _
Arg3:=0.25, _
Arg4:=0.2, _
Arg5:=0.42, _
Arg6:=0.39, _
Arg11:=xlPortrait, _
Arg12:=xlPaperLetter, _
Arg13:=79, _
Arg17:=600
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
End Sub
I want to change Arg13:=79 to Arg13:= Zoomfactor, but I just ain't cutting it as each page is a different size and I am running this from Personal.xls ....
I'm trying to use the SendKeys function to copy data from a range using a button.
I realise this is not the most elegant of ways to acheive the result, but there are a number of factors involved.
The range is laced with code.
However, I have not been able to find a solution. I created 2 macros that work using the alt+F8 and enter option as well as the run from the macros menu method. Whenever I try to use the keyboard short cut eg. Ctrl+e it will either not do anything or pause and then select every cell. The codes are below:
Sub Macro5()
'
' Macro5 Macro
'
[Code]....
I have tried multiple letter options and have also tried many macros in a new workbook and I cannot get it to run with the keyboard shortcut.
I have a workbook that I transfer back and forth from my desktop to my laptop, that uses Sendkeys to add code to the active pane in VBA. It doesn't work on my laptop, but works fine on my desktop.
Both computers have Vista. Is there a switch somewhere to make Sendkeys work?
We have a business system which has some very disjointed reporting. To fix this I have multiple extracts that are then combined into a single report. I then add Year & Period from a lookup of a date in a particular field. Unfortunately most values are returned as #N/A but if I manually go into the sheet and select an offending cell and click then magically the formula then corrects itself.
So I thought I would be clever and use Sendkeys {F2} as part of my code. Unfortunately this is a bit hit & miss as it works on some but not on others. Also the Sendkeys piece repeats itself leaving my frontsheet a 1000 rows from the start. This is easily fixed by selecting cell A1as the last step.
My question is there methods in VBA by not using sendkeys that will achieve the same result and is consistent. I am using Excel 2010.
Code:
Sub Add_Calendar()
Dim cell As Object, c As Range
'setup for calendar data population
' Range("H1") = "Created Date"
Range("N1") = "Year"
Range("O1") = "Period"
'copy the format
[Code] ........
How to stop macro while running SendKeys statement. I am not able to stop the process while running SendKeys statement. this is my Sendkeys VBA
For Each cell In Selection
SendKeys cell.Text, True
Next cell
I want to switch on Caps & Number lock on opening an Excel document. I'm using the following code;
View 10 Replies View RelatedI have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
I got a website with 2 frames: A top frame (separated in 3 sections) and a bottom.
If I click on the first top section, I'm able to Tab to the bottom frame.
Same thing on the sec top section, tab couple of times and I'm in the bottom frame.
But the last top section, I'm not able to tab to the bottom frame.
If I tab, it stays on the top section and I can only select one of the 3 top sections (it will loop between top section 1 and top section 3)
My goal here is to enter the text "Need Planned " in the cell offset 0,1 to the active cell and then have the edit cell (F2) invoke to append text.
I tried to select cell (nt necessary to add the text) and then send keys F2 but it does not enter the edit mode for that cell.
ActiveCell.Offset(0, 1) = "Need Planned "
ActiveCell.Offset(0, 1).Select
SendKeys "{F2}", True
I was looking for a final result as follows
21-Aug-09 + 1 = 24-Aug-09 (Day + next 1st working day)
21-Aug-09 + 3 = 26-Aug-09 (Day + next 3rd working day)
I created a spreadsheet with many CF's and save the sheet on our network, however, when my manager tries opening it the CF's do not work. they are there when I click on CF > Manage Rules, they just not working, neither is the Data Validation Drop Downs?
View 7 Replies View RelatedIn attached file I need doing sum where total working hours are not showing correct.
TotalingTime.xlsxā€ˇ
In A column the date something is received will be entered.
In B column there is a drop down list that has "insured" "Fee" "Aged Debt" "Other".
In C column I am trying to get another date to populate dependant on what is picked from column B, so if Insured is picked then 1 working day needs to be added to the date in column A and populate in column C. If any of the other 3 options are selected 5 working days needs to be added to the date in column A and populated in column C.
I have been using this formula: =IF(B2="","",IF(B2="Insured",A2+1,A2+5)) however this is not working days and I am stuck how to get to add working days
I have a dropdown answer column (J) to select an answer and in column (K) next to it that scores the answer. I'm trying to sum the score of (column K) in cell K7 but can't seem to get it to work.
View 3 Replies View RelatedI defined few name in manager but that are not working. I Defined names with multiple sheets with same Column.
See the attachment : Demo.xlsx