How to stop macro while running SendKeys statement. I am not able to stop the process while running SendKeys statement. this is my Sendkeys VBA
For Each cell In Selection
SendKeys cell.Text, True
Next cell
Attached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
Test.xlsm
I have a spreadsheet containing a macro to automatically sum values from week to week and display the max/min and average. This is almost fully working. The problem I have is the macro copies the sum formula down the page and doesn't stop at the last row. It always adds one or two extra rows. The formula should stop at row 77 however this does not happen and therefore the sum keeps going. Which in turn, distorts the max/min figures.
View 2 Replies View RelatedI wanted to run a macro at 08:00 each day. I tested the macro would auto start and run, and set the test to start at 13:00.
In the Private module of the Workbook I put
Private Sub Workbook_Open()
Application .OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
and in a standard module
Sub TestTimeMacro()
Application.OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
Initially I had the TimeValue set as 13:00:00. The test worked OK so I changed the timevalue to 08:00:00.
The macro now runs at 08:00 and 13:00.
How do I stop the 13:00 event?
I currently have a userform that runs a bunch of code for me. There are a lot of listboxes on the userform that have rowsources of various dynamic named ranges. I'm running into a problem when I have the used click the "Remove Item" button from the userform. Normally it is supposed to go back to the sourcerow and remove all of the cells that contain values that are selected in the listbox.
The code for removing the cells works just fine, however when it deletes a cell, for some reason the code executes a private sub that is in a different sheet. I can't figure out why and it's messing up my macro.
Here's the
FROM USERFORM:
Private Sub cmdAIRemove_Click()
For i = 0 To lbAISummary.ListCount - 1
If lbAISummary.Selected(i) = True Then
For Each cItem In Worksheets("Lists").Range("YourAI")
If lbAISummary.List(i) = cItem.Value Then
cItem.Delete (xlUp) '<- right after this line it jumps to NWSMonth_Change
i = i - 1
End If
Next cItem
End If
Next i
End sub...
I've created a macro that runs for about 3 seconds. While the macro runs, the active worksheet display jumps around because of the various cell references being addressed in the macro.
Is there a way to stop the jumping around? How can a simple "Progress" screen be displayed while the macro is running?
I'm opening a workbook and then running the macro in the workbook. The problem is I would like to build a "timeout" feature if the macro is running too long (as some of the macro's this will run can take days to complete) but I don't know how to run the macro asynchronously. Also I need to know if i can get it to run asynchronous is there an event that will tell me when the process is finished. The calling application of the macro is written in VB6 and opening excel workbooks to run the macros out of. also the "timeout" feature must be done from the VB6 application it cannot be edited into the the workbooks containing the macro.
View 6 Replies View RelatedI've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
Is it possible to run a macro from an IF command?
View 9 Replies View RelatedI am using SendKeys in a VBA script to activiate 2 Add-In functions when a worksheet is activated. The code I am using is:
Private Sub Worksheet_Activate()
Application.SendKeys "%GR"
Application.SendKeys "%GH"
End Sub
Whilst this code works fine as is I would like to provide the user with some progress information either with a message box or via the status bar. The first command refreshes data from an external source and the second hides unwanted rows and columns. I do not have access to modify these add-in functions.
I have tried:
Private Sub Worksheet_Activate()
Application.StatusBar = "Refreshing data in progress ..."
Application.SendKeys "%GR"
Application.StatusBar = "Hiding rows and columns in progress ..."
Application.SendKeys "%GH"
Application.StatusBar = False
End Sub
However, the system does not wait for the sendkeys commands to complete before changing the status bar message so it flashes them on and can hardly be seen
I would also like to turn screen refresh off to speed up the process time however the Application. ScreenUpdating function appears to be ignored.
Hi, I am runnning this marquee label function in a userform (Dash). When I close the form, using 'unload frmDash' the function is still running in the background. Can someone give me a tip on how to end it at the same time as the form is closed?
View 14 Replies View RelatedI have a large macro called SplitData, which takes a load of data and splits it and reformats it each month.
I have 4 Activex Control combo boxes on one sheet that are linked to a range...this range changes each month, so I blank out the range and then repopulate.
My problem is that when I blank out the range, it triggers the Private Sub ComboBox1_Change() and throws some errors because there is no data to select.
So, I was wondering if there is something I can set in my SpltData macro that will not run the ComboBox1_Change sub while the SplitData macro is running?
I have a vba function linked to conditional formatting that i want to temporarily stop while a sub to insert a line is running as the sub stops when it hits the sheet where the vba function operates. When i disable the vba function (or remove the vba function) the sub works fine, if the vba function is not disabled the sub stops.
View 4 Replies View RelatedMy users log on with unique PIN numbers for example 1234. I have a worksheet that has approximately 10 different VBA codes. What I would like is the ability at the start of the code to say if the current users pin is not in a hidden range then exit the code. If not run it. Is this possible?
View 7 Replies View RelatedI have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.
View 11 Replies View RelatedI have a file that shows a rolling screen and updates information every 30 mins. I want to be able to stop the screensaver from activating while this file is open.
I have found this code on the forum that does this, how do I call this function from another module? ...
I was looking at Colo's website for the Application.SendKeys method, http://puremis.net/excel/code/039.shtml ,so that I can speed up a page/print setup macro that I have.
I was partially successful in setting this up, but I did notice that there was no argument number in that method for setting up the "Fit to x Pages Wide" and "y Pages tall".... I really need that functionality....
I saw something here that is supposed to get the zoomfactor : http://groups.google.com/group/micro...8d0?scoring=d& but I can't seem to incorporate it into my code so that it works.
Is there an Argument I can set up to get those?
Here is my code so far:
Sub ElecECNPrint()
Application.SendKeys "{ENTER}", False
Application.Dialogs(xlDialogPageSetup).Show _
Arg1:="", _
Arg2:="", _
Arg3:=0.25, _
Arg4:=0.2, _
Arg5:=0.42, _
Arg6:=0.39, _
Arg11:=xlPortrait, _
Arg12:=xlPaperLetter, _
Arg13:=79, _
Arg17:=600
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
End Sub
I want to change Arg13:=79 to Arg13:= Zoomfactor, but I just ain't cutting it as each page is a different size and I am running this from Personal.xls ....
I have a couple of functions running in my workbook, and for no reason that I can see, when one of them runs during a simple macro I use to show/hide some columns, the worksheet vanishes. Is there a way to stop all functions running while I show/hide columns?
View 5 Replies View RelatedI am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
However, I have not been able to find a solution. I created 2 macros that work using the alt+F8 and enter option as well as the run from the macros menu method. Whenever I try to use the keyboard short cut eg. Ctrl+e it will either not do anything or pause and then select every cell. The codes are below:
Sub Macro5()
'
' Macro5 Macro
'
[Code]....
I have tried multiple letter options and have also tried many macros in a new workbook and I cannot get it to run with the keyboard shortcut.
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedThis formula is being used in a vacation time spreadsheet. So after each paycheck the if statement is applied and need to calculate the accumulation for that week based on if the person has worked 5 yrs or less. I need to stop the today's date calculation in the if statement after it is used. So that each time the spreadsheet is opened the values are a fixed number not changed based on the current date. However if the if statement is pasted into the next pay week it will calculate based on the actual date.
It is calculating is the following:
C4 = 5yrs Anniversary Date of Hire
3.08= less than 5 yrs
4.62= more than 5 yrs
=IF(($C$4)<=TODAY(),4.62,3.08)
[URL] ......
Creating a formula that basically has a big IF statement. I hope this makes sense, so here goes. I am looking to find the "age" or "elapsed days" of an ID from when they created an account to when they stopped. This might be very complex and if there's not a way to calculate the Elapsed days (even though that's what I prefer), perhaps there is some formula that can return a value like a "1" or "True" or something that lets me know the statement is true.
original formula from post 3261273
{=IF(D2>0,A2-INDEX(A$2:D$16,MATCH(B2&"1",B$2:B$16&C$2:C$16,0),1),"")}
New formulas needed or revised from the above:
Formula 1: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Create to Suspend but NO Stopped)
Formula 2: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped) OR Column 6 (Unsuspend), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Suspend Only, No stopped or Unsuspend)"
Formula 3: The ID in column 2 does not have to be the same, but if there is a value in column 3 only (Create) and there is no value in the Suspend, Stopped, or Unsuspend columns, then place a "1" in the cell. My manual calc is the "Create Only" column.
Event Date
ID
CREATE
Suspend
STOPPED
Unsuspend
Elapsed Days (Create to Suspend but NO Stopped)
Elapsed Days (Suspend Only, No stopped or Unsuspend)
[Code] .........
this is the code i'm using but sometimes it runs sometimes it runs incorrectly; i've been told that sendkeys is not a good choice and i should use API but i'm just studying VB6 and i do not know what is API; so i need a code to copy and paste in a module this is the code with sendkeys that i need insterad with API
Sub b()
Shell "C:Program FilesEquisThe DownLoaderDlwin", vbMinimizedFocus
SendKeys "%{T}", Wait:=True
SendKeys "{o}", Wait:=True
SendKeys "{A}", Wait:=True
SendKeys "{DOWN}", Wait:=True
SendKeys "{TAB}", Wait:=True
SendKeys "C:Documents and SettingsfrancoDesktop", Wait:=True
SendKeys "{TAB}", Wait:=True
SendKeys "matrice1.txt", Wait:=True...............
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
Once the intended chain of actions is performed, normally EXCEL would go on to display the contextual menu, (which is its standard right-click action when no macros are involved).
Since I don’t want my macro operation to end with that menu covering part of my screen, I have the macro ‘type’ in ESCAPE, through one of these lines:
A theoretical question following an empiric result.
For the command “SendKeys”, for instance, take these two lines:
I'm trying to access one of my custom menus through a macro.
The keyboard commands are
alt, n, f
and
alt, n, g
I have these lines of
Range("A31").Select
SendKeys "%nf", True
SendKeys "%ng", True
All this seems to do is put the letters f and g in cell A31!
I am trying to use a macro to automate the use of alt key.
my code looks like this-->
Private Sub CommandButton1_Click()
For i = 0 To 10
Range("A" & i).Value = ActiveSheet.SendKeys("%" & i)
Next i
End Sub
This code is to enter the value of ALT+1...ALT+10 to column A