Set Print Area Based On Sort

May 15, 2008

I have a worksheet which contains data for 6 different groups. I have a sort macro already that sorts them into groups (group 1, group 2, etc.) What I want to do know is set the Print Area so I can just print each group individually with a button("print group 1", etc.)

The worksheet is set up as follows:

Columns B-H are the data I want to have printed. The number of rows is different for each group. I want to set the Print Area based on Column H. So, if H=1, set the Print Area for Columns B-H and all rows that have H=1. This seems like it should be simple enough, but I haven't quite been able to put the pieces together yet.

View 10 Replies


ADVERTISEMENT

Programmable Print Area: Macro To Set The Print Area According To The Amount Of Data In A Particular Range Of Cells

Feb 25, 2009

Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction

View 2 Replies View Related

How To Set Fixed Print Area In Excel So Cells Within Print Area Can Still Be Modified

Feb 12, 2013

I have a workbook with multiple sheets that I need to print.

Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?

I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.

View 1 Replies View Related

Print Area Based Off Cell Value

Apr 3, 2012

I have a code Ive been trying to get to work. It works fine with selecting the print area based off a cell value, it just wont update when ever the value changes.

This is on the Sheet's code

Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target Range("A1") Then Exit Sub
Call PrintbyName
End Sub

And this is in a module

Sub PrintbyName()
Dim rng1 As Range, rng2 As Range, rng3 As Range, rngPrint As Range
'Refer to the named ranges
With Worksheets("Permit Page")
Set rng1 = Range("$A$1:$bx$603")
Set rng2 = Range("$A$1:$bx$493")
Set rng3 = Range("$A$1:$bx$493,$a$549:$bx$603")

[code]......

I wasnt sure if I was suppose to fill out where it says "nothing".

View 9 Replies View Related

Set Print Area Based On A Condition

Jan 16, 2007

I have a worksheet named "TQUOTE" with the print area defined as A1:E:286 resulting in 5 pages printing ,however if there are only 3 pages of data I will be left with 2 blank pages being printed. (along with the header rows which are set to repeat for each page ). I should mention this worksheet is included in a list of sheets to print based on the response to a user form. Would it be possible to have the print area change based on the an empty cell that related to the next page break? eg. If the page break for page 1 ends at row 55, if a cell in row 56 were empty then set the print area to be A1:E55 If the page break for page 2 ends at row 85, if a cell in row 86 were empty then set the print area to be A1:E85 and so on ?? I do not have the skills yet to write this macro , and i bow to thiose

View 6 Replies View Related

Set Print Area Based On Cell Values?

Mar 12, 2014

I am trying to set the print area based on cell values, but I keep getting errors when running the macro. It fails where I have highlighted, but rc.Value shows as the proper number.

[Code] ....

View 4 Replies View Related

Macro To Set Print Area Based On Cell Value(s)

Dec 8, 2011

I'm looking for a way to set the print area based on the value of a cell. I have a worksheet that prints a 12-page document, with data pulled from separate sheets. At the bottom of these twelve pages is an additional 2-page section that I only need in certain instances.

For example, if a cell (let's call it A1) on Sheet1 says "brown," I need the print area set to include these additional pages. If that same cell ('Sheet1'!A1) reads "yellow," however, I don't need to include the 2 pages in the print area.

View 1 Replies View Related

Print Area Range Based Upon Formula

Feb 26, 2012

I am trying to dynamically set a print area based upon a formula from the contents of 2 cells. What I need is the print area range to be C1 to Ix, where x is the result of ((A2/B2)+2).

View 2 Replies View Related

Print 2 Selected Area (highlighted Area)?

Apr 11, 2013

How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time

View 7 Replies View Related

Print Previewed A Worksheet And Find A Tiny Image With A Small Portion Of The Print Area

Mar 27, 2009

I just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.

View 4 Replies View Related

Vb Code To Set Print Area And Print Out

Aug 24, 2007

with creating vb code that will select certain rows in a spreadsheet, set the print area to those rows and print them out, and then reset the print area back to default.
The data is all on one sheet, but is split into 5 different areas, each below the next, with the column headers at the top of each.
e.g.

header_____header_____header
data_______data_______data
data_______data_______data
data_______data_______data

header_____header_____header
data_______data_______data
data_______data_______data
data_______data_______data

and so on. At the press of a button it'll set the print area to the first section and print (the section includes the headers as well as the data). Then at the press of another button it'll set the print area to the next section. There could be any amount of rows of data in each section so it needs to cope with that.

View 9 Replies View Related

Print Only Used Area

Nov 9, 2006

I have a sheet that will be about 5 pages long if printed. To minimize wasted ink and paper, using VB I would like to be able to have it only print the portion uses (data entered) along with a section at the top and bottom. The section at the top would print on the top of the first page and the section at the bottom would print on the last page.

I know I could record a macro to select an area and print that but it would not do what I am trying to accomplish.

View 14 Replies View Related

Set Print Area VBA?

Jul 18, 2012

I have an excel sheet with lots of rows (it goes up to BAA) I would like to be able to print certain parts with a VBA

for instance if Sales is selected from a drop down (lets say A1) the macro will print

Area : C7:Z500
Scaling: fit to 1 page
Orientation: landscape
Color: Color

or if Sales next year is selected

Area : C7:D7 AA7:AZ500
Scaling: fit to 1 page
Orientation: landscape
Color: Color
etc....

View 9 Replies View Related

Print Area Always Changes -

Oct 2, 2007

I use the code below to print a portion of a sheet. My problem is that the area always changes. The $A$476 should be the first cell in that column that contains "HEA" The "536" in $F$536 is the last row that contains data. There are conditional formats all the way down to row 1,000 but not data

Private Sub CommandButton1_Click()
Dim strCurrentPrinter As String, strNetworkPrinter As String
****strNetworkPrinter = GetFullNetworkPrinterName("Adobe PDF")
****If Len(strNetworkPrinter) > 0 Then ' found the network printer
********strCurrentPrinter = Application.ActivePrinter
********' change to the network printer
********Application.ActivePrinter = strNetworkPrinter
********ActiveSheet.PageSetup.PrintArea = "$A$476:$F$536"
********ActiveSheet.PrintOut** 'print something
********' change back to the previously active printer
********Application.ActivePrinter = strCurrentPrinter
********ActiveSheet.PageSetup.PrintArea = ""
****End If
End Sub

Obviously there is a function also that finds the full network printer name, I didn't think it was important, because my issue is the print area. Everything else works fine. If you need it let me know and I will post it.

View 5 Replies View Related

Vba To Set Print Area

Feb 18, 2007

Looking for a macro that will set the print area on an accounts spreadsheet to the last non blank row, bearing in mind that all the rows contain formulas, have tried some macros but they assume the cells with formulas in them are non blank

View 4 Replies View Related

Set Print Area Using Activecell

Oct 7, 2012

Goal is to select range from active cell ( where coursos is ) to the top of that row. For some reason

ActiveSheet.PageSetup.PrintArea = Range("xey1":ActiveCell())

Does not work?

View 3 Replies View Related

VBA Code For Set Print Area

Feb 6, 2014

Making a macro that selects active cells (so anything with text in) and sets that as the print area.

Using the default builder I have:

Range("A1:AA44").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveWindow.SmallScroll Down:=30
Range(Selection, Selection.End(xlUp)).Select
Range("A1:AA692").Select
ActiveSheet.PageSetup.PrintArea = "$A$1:$AH$692"

[Code]...

Can trim this code with something

Range("any containing data").Select
ActiveSheet.PageSetup.PrintArea = "selection"

View 1 Replies View Related

Print Area Keeps Expanding

Mar 29, 2014

copying a document that was made in word into Excel. I set the print area and page size but it seems I can keep adding columns. When I check the print preview it still shows the one page but it appears wider.Will it automatically create a new page if the page size limit is reached?

View 2 Replies View Related

Print Area In 2007..

Jan 22, 2009

Excel 2003 used to have a feature where the user can select and set the print area. I do not see this feature in Excel 2007. So, how dow I set the print area in Excel 2007?

View 2 Replies View Related

Dynamic Print Area

Feb 5, 2009

I can define a name to calculate the desired Print Area for a page. For example, print_area_notes: =Notes!$A$1:INDEX(Notes!$A:$Z,final_Note,5). I can then use that name when defining the Print Area via Page Setup.

The problem is it calculates the cell range immediately and substitutes that in the Print Area field. When print_area_notes changes the actual Print Area does not. Is there some formula I can enter in Print Area that will allow this value to be set dynamically? I have tried setting Print Area to =indirect("print_area_notes") but it doesn't like that. I could, but prefer not to, write a VBA function to set the Print Area but even then how do I set it to be called automatically? I'd prefer to be able to enter a formula and do it without VBA code because you then have the security issues every time the spreadsheet is opened.

View 3 Replies View Related

How To Set Print Area In Code

Jul 6, 2014

I have 2 codes that set up different "print areas". Every time i run one of the codes the print area doesn't get set unless i run the same code again. So if i run code A which will set the print area with no issues and then right afterwards i run code B then code B's print area won't get set unless i run code B a 2nd time. And if i now i run code A, the same issue happens and the print area to Code A won't get set properly unless i run the code again.

Here is part of the code that discusses the print area:

[Code] .....

View 6 Replies View Related

Setting Print Area By VBA?

Aug 19, 2014

I have looked for a way to set the print area of a worksheet through vb.

I would like it to find the last row of the worksheet and set it to be printed.

Some of the examples take it beyond the last row of data, because the the code that may be in the empty cells.

HTML Code: [URL] .....

View 2 Replies View Related

Dynamically Set Print Area?

Feb 12, 2014

I'm trying to dynamically set the print area for a given worksheet. I use the code below and it works perfectly when it's executed upon opening the tab; however, the worksheet has filters which may lengthen/shorten the required print area.

Is it possible to execute the code below when the user selects print rather than when opening the tab?

[Code] ......

View 4 Replies View Related

Variable Print Area

Nov 4, 2009

I'm using Excel 2003.

I have a spreadsheet used for costing jobs giving a detailed breakdown of parts and time. Sometimes the customer requests a copy so I'm creating a macro for my boss that prints the spreadsheet, less the hidden columns that I don't want the customer to see. This I can manage.

My question is this: Is there a way within the macro to set the print area to change to where the last cell is automatically?

Each spreadsheet is a different length dependent upon the work required and setting a larger print area to compensate would use excess paper and ink.

View 10 Replies View Related

Setting Print Area VBA?

Jul 19, 2014

I'm looking for code that would set print area when printing the output of my Macro. Print area will always be the same for all two pages. I need to display first two tables on page one, and the next two on page two. All four tables will always contain the same number of columns and rows. I'm trying to automate this process as much as possible.

View 1 Replies View Related

How To Auto Set Print Area

Jan 29, 2007

if there is a way with functions or code to automatically set the print area. I would like to have it set to start at A1 and print to column G & the first ROW with a zero value in column F.

The ROW in which the first zero value appears will be the only variable. It will
always be column G.

View 9 Replies View Related

Macro To Set Print Area

Jul 20, 2007

Is there a macro that can automatically set the print area by determining what the used range is. For example, If P96 is my last used cell, I would want a1: P96 as my print area.

View 9 Replies View Related

Using Macro To Set Print Area

Oct 11, 2007

My macro selects cells containing data - then i want the macro to set the print area to those selected cells - works fine - but the selected cells won't be the same each time i run the macro. Here's how it looks now:

Range("A1:M1").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlDown)).Select
ActiveSheet.PageSetup.PrintArea = "$A$1:$M$76"

The next time i run the macro the selected cells won't be A1:M76 - how do i have the macro set the print area to whatever is selected?

View 9 Replies View Related

Print Area Code

May 7, 2008

I have some code to select a print area depending on wether or not there is data in a cell. The code I have so far partially works but not quite like I need it to. Here's what I have,

Sub selectprintarea()
Select Case True

Case Range("C5").Value > 0
Range("A1:M47").Select
ActiveSheet.PageSetup.PrintArea = "$A$1:$M$47"

Case Range("Q5").Value > 0
Range("A1:AA47").Select
ActiveSheet.PageSetup.PrintArea = "$A$1:$AA$47"

End Select
End Sub

It will select the print range if there is data in C5 but if there is data in C5 and Q5 it only selects the first print area. I know I need an "If - Else" or something of that nature but I cant figure that out. Also I need it to look at other worksheets not just the active one. I've tried a replacing the ActiveSheet with Worksheets (Sheet1). but that gives me an error.

View 9 Replies View Related

Set Print Area Through Code

Oct 24, 2008

I am having trouble setting print area on rows that can vary from 100 to 6000 rows. This code works good except that the print area cuts off the last row of data every time. "AreaBegin"=row 6 and "AreaEnd" = to last row after a set number of rows have been inserted based on a counter.

Basically how do I get this code to capture the last row for print area?

Sub SetArea()
ActiveSheet.PageSetup.PrintArea = Range("AreaBegin", Range("AreaEnd").End(xlUp)).Address

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved