I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range
Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedSay you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedI have to split a range (with a variable number of rows and a fixed number of columns) to a variable number of persons (stated in a column from another worksheet). Basically, in Sheet1 I have in column B a list of names (for example: B3="A", B4="B", B5="C"). Can be a list of 3 names, 4 names or any number of names.
In Sheet2 I have a range of data which has 12 columns and a variable number of rows.
Now, I want to divide equally the rows from Sheet2 to the names from Sheet1.Column B, by creating a new WorkSheet for every name.
For example: If I have 3 names and in Sheet2 a range of data with 10 rows and 12 columns, I want to create 3 new WorkSheets (one for every name) and in every WorkSheet I want to have an equal number of rows, as following:
Sheet Name1: rows 1-4
Sheet Name2: rows 5-7
Sheet Name3: rows 8-10
By this way I splitted the list equally to the 3 names and the first name receives an extra row because 10 Mod 3 is 1, therefore remains a row undistributed.
I have to split a range (with a variable number of rows and a fixed number of columns) to a variable number of persons (stated in a column from another worksheet).
Basically, in Sheet1 I have in column B a list of names (for example: B3="A", B4="B", B5="C"). Can be a list of 3 names, 4 names or any number of names.
In Sheet2 I have a range of data which has 12 columns and a variable number of rows.
Now, I want to divide equally the rows from Sheet2 to the names from Sheet1.Column B, by creating a new WorkSheet for every name.
For example: If I have 3 names and in Sheet2 a range of data with 10 rows and 12 columns, I want to create 3 new WorkSheets (one for every name) and in every WorkSheet I want to have an equal number of rows, as following:
Sheet Name1: rows 1-4
Sheet Name2: rows 5-7
Sheet Name3: rows 8-10
By this way I splitted the list equally to the 3 names and the first name receives an extra row because 10 Mod 3 is 1, therefore remains a row undistributed.
how to write this in VBA? I tried with two FOR loops but I didn't manage to configure them properly.
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test()
Dim StartRng As Range
Dim Buffer As Range
Set StartRng = WorkSheets("Sheet1"),Cells(1,1)
StartRng.Activate
ActiveCell. CurrentRegion.Select
Buffer = rngStart.CurrentRegion.Copy
' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub
I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
View 3 Replies View RelatedI Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code:
Sub dataintoonesheet()
Dim i As Integer
Dim jk As Integer
Dim j As Integer
Dim rowstart As Integer
rowstart = 3
[Code] .......
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing
With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With
'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar
'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1
End Sub
I need my program to:
- find the cell containing the string "Datum/Tid"
- record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range
Dim lRow As Long
Dim lCol As Long
'Find method of VBA
Set rFoundCell = Range("A1")
Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
lRow = rFoundCell.Row
lCol = rFoundCell.Column
End Sub
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String
Dim stopDate As String
Dim startRow As Integer
Dim stopRow As Integer
startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)")
If startDate = "" Then End
stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)")
If stopDate = "" Then End
startDate = Format(startDate, "dd/mm/yyyy")
stopDate = Format(stopDate, "dd/mm/yyyy")
startRow = Worksheets("sheet1").Columns("A").Find(startDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
End Sub
I am getting error in Set MyRange
[Code] .....
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies View RelatedI attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.
View 7 Replies View RelatedI am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have
shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value
I want the select case list of a ComboBox to be treated as a variable in order to shorten the code size. To clarify the problem, i post the code with what i want to do, but don't know how to do it that way.
Code:
Select Case ComboBox1.ListIndex
Case 0: y = "AT"
For j = 0 To 26
Case "j": y = sheets("name").Range("A(j)") 'Range A(j) is a string, so y as well, as seen in Case 0.
Next j
End Select
Is something like this possible?
I have two macros that run fine separately. I want to join them, but when I do I get an Object variable or With block variable not set error.
Here's the code
Code:
Sub border_highlight_insert()
' Change heavy border to new column, change tint - keyed to year A6
With ActiveSheet
Dim i As Integer
[Code]....
This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message.
Sub mcrRefresh2()
Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh
End Sub
I am getting an error at this line:
Set rng5 = Range(.Cells(celle2.Row, celle4.Column), .Cells(celle2.Row, celle4.Column))
Sub UpdateNumbers()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
Dim rng4 As Range
Dim celle1 As Range
Dim celle2 As Range
Dim celle3 As Range
Dim celle4 As Range
Dim celle5 As Range
Dim flag1 As Long
Dim flag2 As Long................
I have a spreadsheet form with all kind of values and what I want to do is to find a data in a worksheet named "Config" based on the spreadsheet activecell value. With the find row adress I return data of another column but same row (in the worksheet) in two diferent label captions. If the spreadsheet activecell value it was found in the worksheet everything is ok but if the value is not found I'm getting the message "Object variable or with block variable not set"....
View 7 Replies View RelatedFunction Find_Range(Find_Item As Variant, _
Search_Range As Range, _
Optional LookIn As Variant, _
Optional LookAt As Variant, _
Optional MatchCase As Boolean) As Range
Dim c As Range
If IsMissing(LookIn) Then LookIn = xlValues 'xlFormulas
If IsMissing(LookAt) Then LookAt = xlPart 'xlWhole
If IsMissing(MatchCase) Then MatchCase = False
With Search_Range
Set c = .Find( _
What:=Find_Item, _
LookIn:=LookIn, _
LookAt:=LookAt, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=MatchCase, _ ........................
Using the message box I see that sheet 1 opens but then I receive an error message Run Time Error 91, Object Variable or With Block Variable not set. I tried declaring and using set on "project" but got nowhere. I also need to have a message indicating project not found. Once this part is solved I will loop all of my other workbooks
I've got a simple Macro which manipulates data in various worksheets. Problem is that I get the error: "object variable or with block variable not set" in the area of the code that I have put in bold below:
All I'm trying to do in this part is find the first occurrence of the #n/a value ....
I have looked at many different examples of uses of the average function but I haven't found any examples of what I need it to do. Here is the code I am trying to use, but I am getting some errors.
View 6 Replies View RelatedI've set up a userform (frmCoC) to read and write info to the "contractor database". Within that userform is a listview control that reads off a second, "induction database".
When the user selects and clicks on one of the displayed entry in listview, another form (frmInd) opens to edit data on the induction database.
There's a command button along side the original form (frmCoC) to create a new entry in the induction database. The click event for the button is as follows:
I only get the error 91 "object variable or blocked vairable not set" when the below code is used or loaded in Internet Explorer IE 9 browser but works fine in Excel.
Public Sub CommandButton9_Click()
Dim myDir As String, fn As String, wb As Workbook, rng As String
myDir = "C:DatabaseCust_Name"
fn = TextBox2.Text
On Error Resume Next
Set wb = Workbooks(fn)
If wb Is Nothing Then
[code].....
I'm trying to run some code but I keep getting the Object Variable or With Block Variable Not Set message. I'm not using any object in the line that is causing the error.
I'm getting an error on the last line of given code
Code:
Private Sub addDescriptions(BucketTotal as Double, Descriptions as String)
Dim DCELL as Range
'''Loop Through Controls'''
For i = 1 to 20
if Controls("TR" & i).Value = "" Then
Exit For
Else
Set DCELL = Columns("F").Find(Controls("DivRate" & i), Lookin:=xlValues, Lookat:=xlWhole).Offset(0,3)
The first goes through a directory and opens all the files.. after it opens a given file it goes off into a sub-routine to process the data in that file.
I am trying to create a counter in the first sub-routine and then pass that value into the second sub-routine to tell it to put the values out on the next row down.. so the first time through it puts the values out on row 1, next time it puts them out on row 2, etc.