Set All Series In Chart To Secondary Axis?
Nov 21, 2012
How do I select all of the series on my chart and flip them over to the secondary axis? I can't seem to find an answer via google... Either VBA or straight Excel would be fine.
For the record, this is part of a larger question. I've been creating a chart using a couple for loops to work through a 2D array (VBA, clearly). At first I would just set each series to the second axis as it was created, but I've found that if I use collapseable groups to turn off different values...well, if I collapse the first series it all dissapears (still shows up in the legend, but the lines are gone.)
If I leave them on the primary axis I have no prolblem. So now I'm working on the theory that it's the way they are being added. So I'm looking for another way to put them on the other axis.
how do you put all series in a graph on the secondary axis all at once. Either an Excel based or VBA answer is fine (I can turn the Excel into a Macro if push comes to shove.)
View 1 Replies
ADVERTISEMENT
Jul 29, 2009
where i can fix the secondary value axis to start at 0 instead of starting from minimum value like usual?
like the min value of my value axis is -12, the secondary axis will follow suit, i. e 0% will start at -12. i want it to start at 0 instead.
View 9 Replies
View Related
Jul 11, 2007
When ever I add a secondary axis to my chart my bar chart sub type changes to a stacked bar chart. How do I keep the sub type bar chart? I have attached an example. I have tried playing with the gap and width of the bars but to no avail.
View 3 Replies
View Related
Apr 27, 2008
In VBA, how to add a secondary x-axis in the lower portion of the chart if I already have the primary axis in the upper part?
This code
ActiveChart.HasAxis(xlCategory, xlSecondary) = True
just adds it to the upper if I have the primary at lower.
View 4 Replies
View Related
Jan 10, 2014
I have a chart with sales data on one axis and inventory on a secondary axis. I have the average of each columns of data and want to add a reference line to each axis with it's average. I have added the averages to my data set, but it only adds the reference line to my primary axis. I actually began by manually inserting two lines to the chart (which seems asinine). They actually didn't print because they weren't actually on the chart, but rather just on the spreadsheet behind.
View 5 Replies
View Related
Nov 26, 2011
All I want to do is color the numbers on both the primary and secondary axis. Primary i want the shade of blue below. Secondary I want the shade of green below. Only the primary axis part of the code does its job. The secondary axis remains black. The code does complete without errors. Excel 2010.
sub color_axis()
ActiveChart.Axes(xlValue).TickLabels.Font.Color = RGB(38, 40, 118)
ActiveChart.Axes(xlSecondary).TickLabels.Font.Color = RGB(0, 153, 0)
end sub
View 1 Replies
View Related
Jan 16, 2007
im having problem formatting my graph.
chart type = line.
I have 1 series of data, which is N values vs. Time.
Time however, is specified by specific dates. The graph is not putting a plot point accorrding to the date corresponding to the N value.
Example values:
date:____1/1/05 _______ 5/7/05 _____ 8/13/05
n value: __55 ___________ 22 _________ 11
I want the chart to reflect the time between the dates and put a plot point (n value) under each date listed and connect with a line.
View 9 Replies
View Related
Mar 13, 2014
Is there a way to Right justify a secondary Y axis?
The primary Y axis is right justified, but the secondary is left justified.
View 8 Replies
View Related
Apr 24, 2012
I am trying to add a secondary axis for a graph but it is not displaying as it normally does, instead of the columns remaining side by side they overlap. I don't normally have any issue with this so I'm not sure what I'm doing wrong. I've attached images to show what i mean.
Before I add secondary axis
After adding secondary axis
View 1 Replies
View Related
Apr 8, 2014
I have been trying to break my new chart that combines stacked bars on the primary axis with their labels on a transparent line graph tied to the secondary axis. The secondary axis allows me to show the labels I want as categories and position them relative to the visible part of the stacked bar (waterfall style) proportionately outside of the bar. The trouble comes when my label positioning is less than or more than the primary boundaries. I can solve this manually by changing the max or min value of the secondary axis, but what I really want is for the secondary axis to be locked to the primary axis' max and min automatically.
View 2 Replies
View Related
Apr 30, 2014
I have a stacked column chart that I need to show an average on, that is on a second axis and shown as a line rather than a column.
I have tried moving it to a secondary axis but then it keeps changing the graph to show only the average.
this is just one of about 25 graphs I am having to do like this.
stacked 2 axis.xlsx
View 2 Replies
View Related
Mar 1, 2014
I have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies
View Related
Apr 20, 2007
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies
View Related
Sep 27, 2006
how to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
View 5 Replies
View Related
Jan 26, 2008
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Apr 18, 2013
How can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies
View Related
Sep 21, 2011
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
View 5 Replies
View Related
May 15, 2008
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies
View Related
May 31, 2012
How to format an Excel table in a forum post!
I have the following table
Code:
seqIdpointsMAEMFE
1033022
1122-511
12-10-1018
130-517
14-11-117
1630-620
1712-120
186-444
190-126
I want to create a stacked chart with seqId as the x axis, and the other 3 columns are values on the y axis.
Excel is making seqId a data series, I don't want it to do that. How do I change it? This is what I have now:
View 9 Replies
View Related
Sep 10, 2012
I have a combination column and line chart with the line series on the secondary axis. Is there a way that I can tell excel to scale the secondary axis so as the line always appears above the columns? As it is it appears above in most instances but sometimes appears below the columns.
View 2 Replies
View Related
Oct 12, 2007
I'm trying to change the default option for the data series when graphing in Excel 2003 .... I am trying to create a line graph
Excel, by default, is putting static pressure on the x axis and the air flow on the y axis .... I need it to be the other way around
I have found out that:
By default, Excel plots whatever you have fewer of—rows or columns—as the data series
apparently it is possible to change this Excel default option, but I can't figure that out
in step 2 of the Chart Wizard, I have tried many different things, but can't get Excel to chart the Air Flow CFM on the x axis, and have static pressure values on the y axis
View 9 Replies
View Related
Aug 1, 2007
I got a set of data which is only 2 colums collecting data problems. The output i get is a time stamp and a fault. Im looking to set a chart up with the time been on the X - axis and number of problems per hour on the Y - axis.
View 7 Replies
View Related
Jun 30, 2008
I have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
View 9 Replies
View Related
Jun 19, 2008
I want to use a macro to change attributes of a series in a chart. Unbelievably, if the series has been pasted into the chart from another chart, and although the macro can address the series and even return values (eg name) correctly, the selection simply cycles to one of the original series on the chart.
View 3 Replies
View Related
May 17, 2007
I have some simple data and i want to create a horisizontal bar chart with 2 axis (X axis) the top one showing number of stocks number up to 270 and the bottom with Market Cap up to 1,200. (See attached). I set up the chart and it looks fine but it has only one axis so in order to create a second axis i right click on the blue series (no of Stocks) and go through the motions of setting up a secondary axis. However when i do that it ends up looking like the chart to the right with the Bars Cojoined (which is not what i want) I cannot seem to achieve 2 axis with separated bars
View 3 Replies
View Related
