How To Right Justify A Secondary Y Axis
Mar 13, 2014Is there a way to Right justify a secondary Y axis?
The primary Y axis is right justified, but the secondary is left justified.
Is there a way to Right justify a secondary Y axis?
The primary Y axis is right justified, but the secondary is left justified.
I am trying to add a secondary axis for a graph but it is not displaying as it normally does, instead of the columns remaining side by side they overlap. I don't normally have any issue with this so I'm not sure what I'm doing wrong. I've attached images to show what i mean.
Before I add secondary axis
After adding secondary axis
I have been trying to break my new chart that combines stacked bars on the primary axis with their labels on a transparent line graph tied to the secondary axis. The secondary axis allows me to show the labels I want as categories and position them relative to the visible part of the stacked bar (waterfall style) proportionately outside of the bar. The trouble comes when my label positioning is less than or more than the primary boundaries. I can solve this manually by changing the max or min value of the secondary axis, but what I really want is for the secondary axis to be locked to the primary axis' max and min automatically.
View 2 Replies View RelatedHow do I select all of the series on my chart and flip them over to the secondary axis? I can't seem to find an answer via google... Either VBA or straight Excel would be fine.
For the record, this is part of a larger question. I've been creating a chart using a couple for loops to work through a 2D array (VBA, clearly). At first I would just set each series to the second axis as it was created, but I've found that if I use collapseable groups to turn off different values...well, if I collapse the first series it all dissapears (still shows up in the legend, but the lines are gone.)
If I leave them on the primary axis I have no prolblem. So now I'm working on the theory that it's the way they are being added. So I'm looking for another way to put them on the other axis.
how do you put all series in a graph on the secondary axis all at once. Either an Excel based or VBA answer is fine (I can turn the Excel into a Macro if push comes to shove.)
where i can fix the secondary value axis to start at 0 instead of starting from minimum value like usual?
like the min value of my value axis is -12, the secondary axis will follow suit, i. e 0% will start at -12. i want it to start at 0 instead.
When ever I add a secondary axis to my chart my bar chart sub type changes to a stacked bar chart. How do I keep the sub type bar chart? I have attached an example. I have tried playing with the gap and width of the bars but to no avail.
View 3 Replies View RelatedI have a stacked column chart that I need to show an average on, that is on a second axis and shown as a line rather than a column.
I have tried moving it to a secondary axis but then it keeps changing the graph to show only the average.
this is just one of about 25 graphs I am having to do like this.
stacked 2 axis.xlsx
In VBA, how to add a secondary x-axis in the lower portion of the chart if I already have the primary axis in the upper part?
This code
ActiveChart.HasAxis(xlCategory, xlSecondary) = True
just adds it to the upper if I have the primary at lower.
I have a chart with sales data on one axis and inventory on a secondary axis. I have the average of each columns of data and want to add a reference line to each axis with it's average. I have added the averages to my data set, but it only adds the reference line to my primary axis. I actually began by manually inserting two lines to the chart (which seems asinine). They actually didn't print because they weren't actually on the chart, but rather just on the spreadsheet behind.
View 5 Replies View RelatedAll I want to do is color the numbers on both the primary and secondary axis. Primary i want the shade of blue below. Secondary I want the shade of green below. Only the primary axis part of the code does its job. The secondary axis remains black. The code does complete without errors. Excel 2010.
sub color_axis()
ActiveChart.Axes(xlValue).TickLabels.Font.Color = RGB(38, 40, 118)
ActiveChart.Axes(xlSecondary).TickLabels.Font.Color = RGB(0, 153, 0)
end sub
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
I need to line up the cells in a sheet so all the cells are right justified like they are normally left justified. Normally the cells align under col A and the cells go to the right in the columns. I need the columns to normally line up under AA and for the cells to go to the left.
View 1 Replies View RelatedI have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedI've put together code to construct a chart
It all works fine but I've noticed an odd quirk which I can't explain nor can I seem to fix. Here's the (reduced) code :
Code:
Dim appExcel As Object ' Excel Application
Dim chtPareto As Object ' Chart
Set appExcel = CreateObject("Excel.Application")
Set chtPareto = appExcel.Charts.Add
With chtPareto
' Primary category axis
[code]....
The category (x) axis title should be horizontal, whereas the value (y) axis title should be rotated. Stepping through the code, when I .SetElement for the category axis title, it appears horizontal as planned. However, as soon as I .SetElement for the rotated value axis title, the category axis title also rotates.
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View RelatedI need to create a graph with a 2 x axis and a single y axis. For example:
Pressure ( PSIA) Solubility (mol %) Velocity (m/s)
200 0.024 1
300 0.036 1.2
400 0.041 1.8
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
Here is something I have found while sorting data from a much larger spreadsheet but is quite disturbing that Excel will not sort very specific lines based upon a secondary value. From the data below try the following:
Select all the data and sort the rows by a primary column of E and a secondary of D both "Descending" and no header row of course.
In my Excel 2003 on two computers you hopefully will notice that row 1 and 2 refuse to sort based upon the secondary D column descending however rows 3,4 and 5,6 will sort correctly. Flip it back to "Ascending" for the secondary Sort of column D and it works correctly for 3,4 an 5,6.
Why does Excel refuse to sort rows 1 and 2 correctly based upon the secondary column D?
I am trying to reproduce a graph similar to this: [URL] ....
How to get the Y axis in the center and two distinct bar charts on either side.
Sample data can be found here: [URL] ....
how to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View RelatedI have a log that I have data validations on.
Column C validates on a list called "Division"
Column D is supposed to validate based on the selection in Column C, and give the list based on Column C.
I had it working awhile ago, then I went and changed the lists. Now, the lists are not validating appropriately (I'm not getting the expected drop down in D based on the selected in C) and I don't know why its not working anymore.
Is it possible to use a formula to replicate primary and secondary lookup in SQL and is it possible to retrieve data from Excel spreadsheets using SQL.
View 1 Replies View RelatedMy Excel gets stuck in a strange world sometimes where it seems like a pop-up blocker is turned on. By this I mean that i can't get question alerts to show in Excel. My only relief has been to reboot.
Here's what I mean - I generally see this two different times:
If I'm in a document that I've modified and click the "X" to exit the file - it never asks me to save, just closes without saving.
When I do a "find" on an item, I do get the first box where I can specify my search criteria. If there is a match, it will take me to the match if I do a find next. However, if I do a find all or there is not match, nothing else happens. I can see the cell addresses flickering in the name box.
I have tried to write code to format numbers to zero decimal places as well as to justify the format as the zeroes appears as 00000000 when imported.
I need the macro to do this on the first 7 sheets.
I also need ------- lines and ) to be cleared on the first 7 sheets.
I have attached sample data and my code below
Code:
Sub Format_Data()
Dim Cnt As Long, i As Long
Cnt = Sheets.Count
Application.DisplayAlerts = False
For i = Cnt To 7
Range("F:H").Select
With Sheets(i)
[code]....
I have a data set that is a spectrum of (y)intensity vs (x)energy I was wanting to add an additional X axis at the top of the graph showing the wavelength conversion for the energy value, is that possible in excel? and if so how?
View 1 Replies View Relatedhow do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies View RelatedI'm pulling excel data that is adding extra rows to add more relevant data on a certain column for THAT particular row. How do you create a command that will scan if a certain cell on column B is empty, so that it will justify the multiple data on different cells on column C?
My situation example: Cell B7 is empty so that means I will need cell C7 and C6 to justify. (If possible, an explanation on how to delete row below after justifying would be great!)
I will add a screenshot w/ mock data if needed.
I would like to add a vertical axis to the right of my plot that looks exactly the same as the left axis. The only way I found to do this is to add a secondary axis. However this axis is based on a data series and it does not match the left axis.
How can I make the left and right vertical axis look the same.
Any way to get the values in a chart/graph by putting an specific X axis value.
E.g. There is relation between Gauge height and Flow
GaugeFlow
0.30500.320.100220.3413880.275390.3813470.855280.4017081.322240.4137521.692480.4333542
.468280.4529963.431060.4823795.30220.5115577.774290.5229628.94510.56120913.535920.58917.68
If I draw the curve with Flow on X-axis and Gage on Y-axis and then want to know the flow at Gage 0.53m.
OR
By putting flow value to know Gage height.
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies View Related