I have written a macro to record some information to cells on a spreadsheet. Below is my code. As you can see I already have row setup in the code, but I now want to add column as an integer. So that if something were recorded in col m, then it would add 1 to colu and the next information would be added in col n.
Col = 13 (M) to start with.
Dim row As Integer
Dim colu As Integer
If Trim(txt(8, 10, 25)) = Workbooks("Book1").Worksheets(1).Range("K" & row) Then
MyScreen.Area(8, 4, 8, 5).Copy
MyScreen.Area(22, 40, 22, 41).Paste
SendKey "<ENTER>"
If MyScreen.Area(7, 57, 7, 57) = "A" Then
Workbooks("Book1").Worksheets(1).Range(colu & row) = Trim(txt(7, 57, 74)) 'getting my error here.. something wrong with colu
colu = colu + 1
End If
I set a column width to some integer like 10, and the next time I open the file it has changed to something like 9.89. Is there some configuration that prevents this from happening and leaves my setting alone?
Essentially, I have a column of integer values which I would like to iterate through. The integers in the column vary from 12 to -12 with the exception of 0, so 24 possible integer values here.
For each possible value, I would like the activecell.offset(0,7) value added to a variable.
So if I iterate from cell A1 to cell A10, each time a value of "1" appears, I would like the cell 7 spaces to the right of the "1" cell added to a "total" variable for "1" e.g.: "totalOne".
The same applies for every value within my range. So if there are three instances of the value "8" between A1 and A10, then each value 7 cells right of those "8" values will be added to a total value for the value 8.
I started to use:
select case range("u4:u150"). value
case 1 Dim value1 = value1 + ActiveCell.offset(0, 7).Value
However, at this point I realised that a switch statement stores the range I have given it as an array, so my 'case 1' cannot work as it is trying to compare an integer with an array.
Finally, if it stores an array, surely it wouldn't be able to get cell.offset values as it would have no references to those locations given that the array is just a group of integers, not actual cell references? Will I have to use lots of "for each" statements? hope not!
I have a first column, which contains random integers typically with gaps of between 10 to 50 blank cells. The data may have up to 5,000 rows in total.
In the next column along I would like a calculation which averages the integer in the first column out across all rows until another integer is reached in the first column.
E.g. In the first column, the first number is 60, then 9 blank cells till the next entry. In the second column the first 10 cells each contain the number 6 ( = 60/10).
I am building a Workbook which takes data from SheetA and inserts it into SheetB. Part of the data is only entered when a positive value exists.
I then do an export from SheetB.
The problem is that I need to get the column number and pass it to the cell reference based on the field name in row 1.
Dim sFindstring As String Dim rFindcell As range Dim iR As Integer Dim iC As Integer
sFindString = " Find this string in the cell" 'Using cells find the findstring Set rFindCell = Cells.Find(What:=sFindString, After:=[A1], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
'OK so look here iR = 3 'I am trying to pick up the column number iC = rFindCell.Column
rFindCell throws an object or with block variable not set error. Is there some property that I need to set.
I have an excel that gets updated monthly with new sales data. The sales data comes straight from our custom CRM system in a .xlsx file. All columns on this spreadsheet have a column type of general.
In the excel that is updated monhtly however their are certain columns that are set to a date type so that we can group pivot tables by date. Currently I have to paste the data that is exported from our CRM system into the monthly spreadsheet (beneath all the prior months data), create a new column next to any date field and then use the formula
Formula:
[Code] .....
I then have to take the resulting data and paste them as values over the original data so that it is in the correct format.
Is there a quicker way of doing this so I don't have to keep adding a new column and doing the forumula, can I somehow set the column so it automatically converts data in a general format to a date format.
setting up filters or sorting for different columns in excel.
I am trying to make a database for my research. At the moment my cells look like this (this is just and example, the real list would be much longer):
Source Policy
IEA WEO RE Policy Global
IEA Clean Technology Tracker RE Policy China, US
[code]...
I would like to put a drop down menu that allows me to search my sources. For example, I want to find 'IEA' in the 'Source' column and only entries with 'IEA' in the title pop up. Or I want to find 'Wind' in the 'Policy' column and only entries with 'wind' come up.
I have some code to plot a column chart of data but it isn't working as expecting at the moment. The code is below. The variable binCounter is a count of how many cells in a range that I want to plot on the chart.
However, what I am finding is that the first couple of cells in the range appear as the series name with the rest appearing as the data in the chart. Secondly, the chart appears with the axis labels 1,2,3 etc when I have some custom ones I would prefer to use. How do I go about setting this property, as I can only find options on setting the axis title There is a lot of stuff on XY charts on Google but I can't find much on column charts unfortunately .
VB: 'activate sheet and chart Worksheets("Home Page").Activate ActiveSheet.ChartObjects("Histogram").Activate
I though I could do this with a nested IF statement but it is too cunfusing for me. What I am trying to accomplish is this:
Experiment Is Steward EU ID Location Data Quality GE Entry Order
[Code] ........
I want to have a screen pop-up asking me what my limit < would be for column "ESTCNT" so if I put in 25 or any other number that it would highlight all the rows that are less than 25, then look at the row above and below and if it matches the same number (that is in the cell "Range" of the highlighted column) in column "Range" then copy that row to a new sheet. Meaning all tha rows that match the "Range" would be in the same new sheet.
The rows might be different lengths and that there will not always be a number in cell "ESTCNT". Column headers will always be the same but might not be in the same column each time. And if it is not to hard once it is completed to find column "SPPLOT" in the new sheet created and asking what I want to autofil the column with.
I have been working on a basic input sheet for progress reporting at work to standardize the information and acheive a half decent automated report.
I am have trouble validating the textbox to only allow an integer to be entered in the box. On result of text being entered on add, a msgbox should prompt the user to enter only text.
How might I do this?
Private Sub CommandButton6_Click() Dim iRow As Long Dim ws As Worksheet
Below is a snapshot of data in a column. I need a way to extract the number, may be a whole, may be decimal, and leave behind the text description. Result to be put into a new column:
The idea here is that the integer could be integrated in anyway imaginable with the associated text. I don't need the text. The end result must display this in a new column:
i need is a script that will add two boxes together to get a sum in a third box, but where it is tricky for me is that i need the third box to retain the summed value even when either of the first two box values are deleted.
For example, say i have box A1=10, B1=40, and C1= SUM of A1 & B1 (so C1=50). Easy enough, but where im lost is that i want to be able to delete the value of either A1 or B1 and then have C1 still = 50, so then i can input another value into either A1 or B1 to continue to add to C1.
I'm creating a user form where the user can enter latitude and longitude in either Deg/Min/Sec format or Decimal Degrees. To go from decimal degrees into Deg/Min/Sec I need to do the following
X = Integer(A) <-- I need to cast A as an integer or truncate it. Not sure how to do this in VBA. Y = Integer[( A - X ) * 60] <-- Again, needs to be cast as an integer Z = {[( A - X ) * 60] - Y} * 60. I didn't see a native truncate function in Excel and in the past I've always used Left() or Right()
So I'm trying to format the last variable so that it is always four digits, ie, 0001, 0034, 0204, 1234, etc...
Any clue how to do this, I've searched around and can't seem to find the code for it. I could do it with a long set of conditional statements, but I'm pretty sure there is a format function or something.
In the following code snippet I have worked out a way to verify that the user inputs an Integer and then prompts downstream if an improper value was entered. The user is prompted for a corrected reponse and loops until they get it right. The initial Cancel at the first prompt was causing issues until i saw poster: titarelli use StrPtr(). Except for subsequent cancels, the code works but it is clunky at best. How to tighten this up?
VB:
Dim Quantity As Variant Dim CorrectedQuantity As Variant Dim j As Integer
Take a look at the sample sheet. I get the information as an import that looks like the info in column A.
I want it to look like the data in Column B. If I try to format as a number it always turns the last number to a 0. I also dont want the 0's on front of the digits either.
I dont really care how its done. But I would like a routine to turn column A into and like the example in Column B. No zeros on the front and maintaining all numbers.
I'm trying to write an if statement that checks if a value is a whole integer value or not. I was initially using the Mod operator but realized that the Mod operator rounds values to whole numbers before determining the outcome. Initially I tried:
I need to count, not list, all of the factors of an integer. For instance the number 12 has the following, 1 2 3 4 6 12, so the solution to the NoF(12)=6.
I would like to round down to interger or half. I would give you some examples:
3.76 to become 3.5 2.48 to become 2 -1.12 to become -1.5 0.05 to become 0
I tried to use round down fucntion but I am not able to have the desired outcome. I thnink the issue is with the second argument of the aforementioned function. How many digits should be indicated? I put 1 but it does not work.
