I would like to round down to interger or half. I would give you some examples:
3.76 to become 3.5
2.48 to become 2
-1.12 to become -1.5
0.05 to become 0
I tried to use round down fucntion but I am not able to have the desired outcome. I thnink the issue is with the second argument of the aforementioned function. How many digits should be indicated? I put 1 but it does not work.
I would like to round this number (3.5) to become 4, but by using this formula =CEILING(A1,0.5) the result will be 3.5
i need a formula that turns 3.5 to 4
when i use this formula =ROUND(A2,0.5), 3.5 becomes 4, but 3.2 becomes 3 not 3.5
i.e. a formula turns 3.2 to 3.5 and 3.5 to 4
Macro which run after every Half (1/2) Seconds..
View 2 Replies View RelatedWhen I enter 1/2 I want it to stay as a half but when I press enter it automatically changes to the date. How can I stop this?
View 2 Replies View RelatedI need to pause for 0.5 seconds (half a second). How can I do that. applicatiom.Wait can only be used for whole seconds and a FOR ... NEXT loop is CPU dependant.
View 3 Replies View RelatedIs there any way I can split a cell in half, so I can put numbers in the left part of the cell, and the right part?
If so, I would I refer to those numbers in my macro?
I have two sheets. One containing in cell B2 "1211 - Extra Core Hours" (t_Cost_Centre_data) and then another sheet that displays the data. On the display sheet, there need to be two fields. Event ID and Event Name. The event ID is the "1211" and the name "Extra Core Hours".
My question is, how do I split the reference so that only the ID and name appear in the relevant cell?
Ie Event ID Event Name
1211 Extra Core Hours
Note, the ID's and names will change and they will be multiple.
Formula Help!.xlsx
I have a spreadsheet with members details in and I've added a few columns showing:
Col Q: Paid 2008 (blank if No, 1 if Yes)
Col R: Show Paid Yes or No (shows a Yes or a No)
Col S: Date Joined (only entered if new and joined during 2008)
Col Z: Subs owing from 2008 (if existing members and owe last yr's subs)
Col AA: Subs to Pay in 2009 (a standard £35 or pro rata if joined during 2008)
Col AB: Pro Rata (if they joined other than at the beginning of 2008)
Col AC: EA Sub? (based on a yes/no column, to add £5 if yes)
Col AD: Total to Pay for 2009
So the formulae (or data entered) for the above columns are as follows:
Col Q: Paid 2008 - blank if no, 1 if Yes
Col R: Show Paid Yes or No - =IF(Q2=1,"Yes","No")
Col S: Date Joined - a date entered in format d/m/yy
Col Z: Subs owing from 2008 - =IF(R2="no", 35,0)....I want a default 35 in here
Col AA: Subs to Pay in 2009 - =IF(S2="",35,"Pro Rata")....says that if there is no date which indicates they are an existing member, they will pay the standard 35, otherwise they'll be paying a pro rata fee...................
Problem:
It all works fine until a certain row (27 actually) - then I get a VALUE! error which points to the Date Joined field. Now I've tested that value against the vlookup table and it returns the correct data, so why doesn't it do it in my spreadsheet????? I've tried changing the formats on the cells; clearing all data; entering a different date, but from that row in the spreadsheet down to the last row, it simply won't work! I've looked at each formula in each cell on the rows where it is working and the rows where it isn't and I can't see anything different.
What else can I look for? It is SO frustrating as it does what I need it to to do but only for a third of the spreadsheet!!!!
Trying to take for example, 9/25/2012 and write a formula to make the resulting cell read 2H2012. Or 4/15/2012 and have the resulting cell read 1H2012.
View 5 Replies View RelatedWhen I go to print my 1 page document, I've selected to have the page shrink to fit onto 1 page. For some reason, when I choose this option to shrink, it doesn't print the entire document, only about 3/4 of the page or so. Something I did recently that was a little different that may have caused this but am honestly not sure is i added my company logo to the header so it'd print on the document too. If I added it as an image, for some reason it wouldn't print.
View 7 Replies View RelatedI have created a combination chart comprising a column and a line. The columns to the extreme right and left are half visible (I can only see half of the column).
Look at my two attachments to see what i mean.
Attachments:
Excel File: http://www.MegaShare.com/235337
Screenshot:
OR
http://img530.imageshack.us/my.php?i...icture1qi7.png
Note: I have cross-posted this thread in excelforum.com: http://www.excelforum.com/showthread.php?t=608124
I have large data sets with half hour values that I need to average into hourly values. Here is an example of the data:
28.12.2012
01:30:00
0,1
2,4
2,5
127,6
28.12.2012
02:00:00
0
0,9
0,9
118,5
[code]....
Is there a way in excel 2010 to cut out half of the data in a cell .. to make the top four in example to look like the bottom four?
1986 Jun- 9 to Jun-13
1986 Jun- 2 to Jun- 6
1986 May-26 to May-30
1986 May-19 to May-23
1986 May-12
1986 May- 5
1986 Apr-28
1986 Apr-21
I have a list of records that will eventually be used to create a pivot table. Sometimes an account number will be listed twice but instead of adding to the previous info, it needs to start a new record. I decided in these instances to mark the account number with a character (+). Even though the + will designate a separate record, I'd like it to be invisible.
Is there a way to automatically turn the font color white for only the +? Since I've automated the rest of the process using a macro, a VBA solution is fine.
calculate the full-width half-max of a peak in data? My chart (gray value vs. pixels) essentially looks like a letter M. What I've tried is finding the max of each peak, dividing that by two, and then using vlookup to find the corresponding pixel values on each side of the peak. But, since vlookup does not work for descending values, I cannot find the half-max value on the right side of each peak.
View 2 Replies View RelatedI have a worksheet containing one timestamp column and a single column of data, the interval being one minute. How can I aggregate it to get half-hourly totals?
View 4 Replies View RelatedI have huge columns of data that can only be 30 characters long. I want to use a formula to split the column into two. The original column will have a character limit of 30, and should not cut words in half. If the Length will be more than 30 while including the entire last word of the cell, that word should be the first displayed in adjacent cell in the 2nd column.
The 2nd column can be any length.
I usually use a Text to Columns method, but dont know how to make it not cut off the words.
I am running 2 audits on aspects of patient care. The first audit records a unique number that identifies the patient, and then a series of answers on demographics, and other stuff.
The second audit also records the unique number, and collects some other data on the particular patient at a later point in time (medication usage, levels of pain etc).
So in theory both audits will collect different information on the same patients. In practice, some patients will be missed and there won't be matching data sets. The order of collection won't be the same either, ie Audit 1 might be in the order of Patient 1,2,3,4 etc but Audit 2 might be patient 2,4,1,3
For various reasons these two data collection tools are not linked, and I end up with a spreadsheet for audit 1 and a spreadsheet for audit 2.
I need to merge these so that I can see all of the data for a particular patient at a glance, and where the gaps are, and apply some statistics to it etc. I could sort both lists by the unique audit number so that they are in order, and then copy blocks of data over from one sheet to the next, but there will be records missing, i might make a mistake with the alignment, and I'm sure there must be a better way.
I am using Excel 2010. Each audit case has about 50 columns of data for Audit 1 and 30 columns for Audit 2 . There will be ~20 new records (Rows) created each week that I want to progressively merge.
i have created a xlColumnStacked chart using VBA in excel 2000. i would like to place a line in the center of one of the Points(). How can i locate a specific point, for example Points(1), so what i can then "draw" a line in the center
View 7 Replies View RelatedI want to create a macro or formula for changing the colour of the cell after half an hour of inputting.
View 3 Replies View RelatedI don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
I received a reply somewhere
Dim i As Integer
is better used as
Dim i As Long.
Integers get cast to long in the OS, and then back to Integers when passed nback, so it is a unnecessary overhead.
but didn't want to hi-jack that thread
QUESTION:
why would we still use "integer" then?
I tested with
Sub testInteger()
Dim starttime As Double
starttime = Timer
Dim i As Integer
For i = 1 To 32766
Dim j As Integer
For j = 1 To 32766
Next j
Next i
I have been working on a basic input sheet for progress reporting at work to standardize the information and acheive a half decent automated report.
I am have trouble validating the textbox to only allow an integer to be entered in the box. On result of text being entered on add, a msgbox should prompt the user to enter only text.
How might I do this?
Private Sub CommandButton6_Click()
Dim iRow As Long
Dim ws As Worksheet
how can i sum integer like
1548=1+5+4+8=1+7=8
I have a problem with vlookup. Here is an example:
A1= 1.3
Then my data array would be something like this
C D
1 a
2 b
3 c
4 d
My problem is that the reference for the look up is a non-integer, but the data in the lookup is. How can I make this work?
Below is a snapshot of data in a column. I need a way to extract the number, may be a whole, may be decimal, and leave behind the text description. Result to be put into a new column:
Hernia Umbilical 553.1
Perirectal Abscess 566
Diverticulitis 577.0
553.21 Hernia Vental/Incisional
Abdominal Pain RUQ789.01
Abdominal Pain RLQ789.03
217: Benign Breast mass
541-appendicitis
Chronic 575.11 Cholecystitis
SBO560.81
786.05SOB
226/ Thyroid neoplasm
The idea here is that the integer could be integrated in anyway imaginable with the associated text. I don't need the text. The end result must display this in a new column:
553.1
566
577.0
553.21
789.01
789.03
217
541
575.11
560.81
786.05
226
i need is a script that will add two boxes together to get a sum in a third box, but where it is tricky for me is that i need the third box to retain the summed value even when either of the first two box values are deleted.
For example, say i have box A1=10, B1=40, and C1= SUM of A1 & B1 (so C1=50). Easy enough, but where im lost is that i want to be able to delete the value of either A1 or B1 and then have C1 still = 50, so then i can input another value into either A1 or B1 to continue to add to C1.
I'm creating a user form where the user can enter latitude and longitude in either Deg/Min/Sec format or Decimal Degrees. To go from decimal degrees into Deg/Min/Sec I need to do the following
A=Decimal Degrees (Single)
X=Degrees (Integer)
Y=Minutes (Integer)
Z=Seconds (Single)
X = Integer(A) <-- I need to cast A as an integer or truncate it. Not sure how to do this in VBA. Y = Integer[( A - X ) * 60] <-- Again, needs to be cast as an integer Z = {[( A - X ) * 60] - Y} * 60. I didn't see a native truncate function in Excel and in the past I've always used Left() or Right()
I am using the IsDate() and IsNumeric functions in my VBA code. Is there an equivalent function for testing if a value is an integer?
View 5 Replies View RelatedI'm trying to format a number inside of a chain of a string. So,
Worksheets("TASK").Cells(task_sht_current_row, task_sht_act_id_column) = Cells(current_act_row, work_package_column) & "-" & Cells(current_act_row, cti_wp_column) & "-" & current_act_step_num
So I'm trying to format the last variable so that it is always four digits, ie, 0001, 0034, 0204, 1234, etc...
Any clue how to do this, I've searched around and can't seem to find the code for it. I could do it with a long set of conditional statements, but I'm pretty sure there is a format function or something.