With Wb.strMyBookINT
Set S70Wscopy = Sheets("s70 pivot data") 'set s70 pivot data sheet for kpi 44 s70 pivot data
Set IMFWscopy = Sheets("imf pivot data") 'set imf pivot datasheet for kpi 44 imf pivot data
End With
With Wb.strMyBookEXT
Set IMFEXWscopy = Sheets("imf ex") 'set imf ex sheet for kpi 15 imf ex
End With
correct syntax to set these sheets?
I've been looking at code a lot here and at the end I always see people ending their VBA code by setting the variables to nothing. Why is this done? Don't all the variables in the sub automatically get trashed when the sub ends?
So what would be the difference of me doing:
Code:
Sub emailUser(strSubject As String, strMessage As String)
'Allows you to email the user if an error occurs instead of giving a messagebox
'and stopping everything. This way if something can not be checked out, you know
'what happened and can redo it the next morning (or fix the error if need be)
Dim olApp As Object 'Outlook.Application
Dim Msg As Object 'Outlook.MailItem
[Code] .....
vs
Code:
Sub emailUser(strSubject As String, strMessage As String)
'Allows you to email the user if an error occurs instead of giving a messagebox
'and stopping everything. This way if something can not be checked out, you know
'what happened and can redo it the next morning (or fix the error if need be)
Dim olApp As Object 'Outlook.Application
Dim Msg As Object 'Outlook.MailItem
[Code] ........
I have put together the below macro to take data from an Excel spreadsheet and place in a word documents (using bookmarks.
What should happen is it should open up the correct word template depending on what data is in column E (Servicecode) and fill in the bookmarks with the data from excel.
It all works fine and goes through the loop and saves, inputting the correct data into the bookmarks but after looking at the saved templates and scrolling through using F8 the IF ELSE does not seem to work. It CALLS theBearSSR macro rather than the relevant macro e.g. word in E2 is Cele, the macro should call the CeleSSR macro (which opens the correct template).
I don't think i have declared my DIM Servicecode correctly... I can't seem to figure out how to make the IF ELSE condition look at the Servicecode and then go to the correct sub routine (the difference between them is the template that is opened).
HTML Code:
Sub Celebration()
Dim departuredate As String[code]......
i have a variable that will be the same in every module within a workbook. i have tried playing with Global, Public, Conts, etc. but get compile errors.
essentially this is what i want... i just want to set the dte globally so i dont have to set it in each module.
Code:
Global dte As Date
If Weekday(Now()) = vbSunday Then
dte = Date - 2
Else
dte = Date - 1
End If
I need to be able to locate some important columns in a table of raw data (the column locations are not fixed).
I would like to identify the locations (based on the heading values in Row 1) and store them as Public variables. The Match function works fine for this, however I'd like to make a simple loop to set these variables (opposed to repeating the function for each).
In the example below, I can't figure out how to reference "List1(Count)" as the name of the variable I'm trying to set.
Code:
Public Field1 As Long, Field2 As Long, Field3 As Long 'The column numbers will be stored here
Sub FindFields()
Dim List1(3), List2(3)
Dim Count As Long
'Public variables (declared above)
[Code] ......
So after running FindFields(), the Test1() macro should give "1 - 2 - 3" (for example) as the locations of the fields in Sheet1. But currently this doesn't work.
I have a WorkBook with each sheet being a calendar month. I want to set the ActiveSheet as the current month so each time I open the WorkBook it opens to the current month WorkSheet not the last WorkSheet I was viewing.
View 12 Replies View RelatedI need to prepare count sheets for stock take on my company and I have a long list for data with hundreds of locations. What my colleagues have been doing is to filter the locations 1 by 1 and clicking print because we want the page numbering to be 'page 1 of 3', page 2 of 3 etc. for each location.
For example
Location a has 2 pages we want it to be page 1 of 2, page 2 of 2
Location b has 1 page we want it to be page 1 of 1
This is so that we can detect if any count sheets have gone missing.
I want to be able to print everything at 1 go, without filtering the locations manually and clicking print as it takes hours to do so.
Is there anyway I can do it? I have some knowledge on excel but not macros.
i want to set the minimum to be 20 less than the minimum value in the data, and the max to 20 more than the max value of the data.
View 9 Replies View RelatedIs there a way that I can set a single worksheet in a workbook to always be on manual calculation, but keep all other sheet in the workbook set to automatic?
I want to be able to open the workbook, any calculations to perform automatically and then i will select the 'manual' sheet and perform these calculations manually. I also need to these settings to always apply each time i open the workbook.
I am trying to setup a search page in a worksheet on a document. I want to be able to search by an indicator (DID#), but there maybe multiples of the same (DID#) in the data. I want to be able to have each instance of the multiples displayed on the search page. In addition, I want to reference other data that matches that (DID#) in separate cells.
Please see below, I want to have a search area that I can input the DID# and have a return of the corresponding info for that row. If I search "123" there are 2 entries and will need both displayed. The data is much bigger, but this is just a sample.
Date
DID#
Location
Type
Owner
12/13/14
123
Anywhere
Flooring
RL
[Code] .........
The user is asked for one piece of information "Enter the ID Number.
What the macro should do then is go to Wks1 find the ID Number and change some cells as a result. This bit works.
Set Wks2 = Worksheets(strWks)
7 rows from the bottom.
My intention was to capture the the name of another worksheet which is held on the same row as the ID Number on Wks1 and call it strWks.
Then further down the macro set the value of Wks2 to that of strWks so that the macro will then go to that sheet and remove data from the row with the same ID Number.
I get a Time Run Error 9.
It just seems to be the bit at the bottom where I am trying to identify Wks2 using strWks.
Sub Macro01C_Auto_Resign()
Dim Wks1 As Worksheet, Wks2 As Worksheet
Dim strFind As String, rngFound As Range
Dim lngRow As Long, rngUnion As Range, strWks As String ............................
Subcript Out Of Range Error Coming Now For The Code Which Works For Me Before
Sub WHideRows()
Dim rRange As Range, rCell As Range
Dim strVal As String
Set rRange = Worksheets("WIED PROBLEM WELLS").Range("A11:A110")
For Each rCell In rRange
strVal = rCell(1, 3) & rCell(1, 4) & rCell(1, 5) & rCell(1, 6) & rCell(1, 7) & rCell(1, 9)
rCell.EntireRow.Hidden = strVal = vbNullString
Next rCell
End Sub
i am using the code above to hide the rows which doesn't have any values in all the following Cells 3,4,5,6,7 & 9 or Unhide the rows if there is value in any 1 of the following cells 3,4,5,6,7 & 9 from row number A11 to A110.
The same code works for me before. But now the code is not working. It says below the error message
Run-time error '9':..................
I am trying to create an array in VBA with a loop, where new variables are assigned each time the loop starts. These variables are then used in calculations and the final answer found by using Solver. I have managed to get this working by setting specific cell references, but I want to do it without interacting with the sheet and populate and array.
I am not sure how to use the variable, eg. x in the place of the SetCell:=Range("A1") part.
So to put it clearer, I want to substitute the Range references with variables x and y from my VBA variables, without interacting with the worksheet to get values.
How to assign a "WS(i)" worksheet name and have the assigned variable (i) in the name equal the consecutive steps in a total page count.
Here's the code that does not work:
Code:
Dim WB as Workbook
Dim WS as Worksheet
Set WB = ThisWorkbook
For i = 1 To WB.Sheets.Count
Set WS(i) = WB.Sheets(i)
Next
I can see why it does not work. I can't figure out what to declare in my Dim or how to word the statement using the (i) variable in order to capture the value to attach to "WS."
Details: The issue is that the number of pages created will vary day to day depending on staff needs. There's an array of staff names to be assigned to page tabs and there will be skips and deletions along the way depending on daily attendance so "WS(i)" worksheet names can't be assigned at creation. What happens if they are is that the succession of worksheet names winds up being (e.g.) "WS1, WS2, WS5, WS12," etc. instead of consecutive.
There's a very complex data-sort-and-assign system that depends upon how many staff-assigned sheets there are, and as such each sheet has to have a "WS" worksheet name for the process to stay smooth. If the names are not consecutive, though, the sort-and-assign process becomes confused. This step takes place at the end of the initial workbook set up process, immediately before the data are addressed, so there really isn't an earlier opportunity. It can't be later since from this point on the system depends upon the "WS(i)" names being there.
It started fine when there were 5 people. Now there are 37.
I have a spreadsheet with a real-time data link in cell A1 and I use Worksheet Calculate() to paste the new value, on any update,below cell A1. Once I have 10 values from A2 down to A11, I over-write the first one, so that I have the 10 most recent. From this I calculate the moving average.
Anyway, I would like to be able to do this without the pasting bit ie storing the most recent ten data points in a variable say x(i) and just averaging x(1) to x(10).
I'm guessing I need to use some kind of static variable or array, but I don't really know how to do this.
passing variables within procedures on a worksheet. i have:
Private Sub lblGoToMaterials_Click()
'email to:
'----------------
'grab current position
myRow = ActiveCell.Row
mycol = ActiveCell.Column
and i would like to pass the values gotten in myRow and mycol to:
Private Sub cmdGoBackTo_Click()
Application.Goto Reference:="R" & myRow & "C" & mycol
Using Excel 2007, I'm trying to figure out (and not succeeding!) on how to declare worksheet and range - in order to:
input a formula to cell xfd1, then copy down to xfd2:xfd100 - and here's what I've been playing about with
Code:
Sub filldownxfd()
Dim src As Range, out As Range, wks As Worksheet
Dim sRangeName As String
Workbooks.Item(1).Sheets.Item ("Sheet1")
Dim example As Range
Set example = Range("xfd2:xfd100")
[code]....
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
What formula could I use to return the following results.
1, 2, 3,4, 5, 6 = Manhattan
7 through 12 = Bronx
31 = Staten Island
What I want to be able to do is set up a thing that when you're in the excel sheet you click on it. Up comes a box where you can enter data and when you click submit. It puts that data back into excel spreadsheet. I have attached a spreadsheet to show what I mean. I have deleted some stuff that are unnecessary so don't worry about them.
What I need is for you to click a button that will create a new row/copy into the next row, from A9-AH9. Then the button will automatically bring up a box that will ask for Time, Timber, Clay, Iron, Warehouse, Hiding Place and then will enter that data into there respective cells which would be D20, F20, I20, L20, O20, Q20 respectively. That is the main idea. maybe it would be better to have te button come up with a box asking for the information and then will create the row and insert the data. If it's easier you can just do the box with just time or something so it's easier. I can then do the rest.
Tyvm. This to me seems really complicated so not sure how you would do this at all. i've looked at other stuff on the internet but haven't gotten anywhere.
P.S. If you have a more generic thing similar to this then show me the code for that or upload it and I can change it too suite my needs.
This macro was working just fine, now it generates an error on the line in red.
View 2 Replies View RelatedIt looks like this (log(X/Y))/log2. The X and Y are celldirections (E2 or F4 and so on). How do i setup that formula in excell?
View 2 Replies View RelatedI have the word "Gross" in a cell at the end of each month on one sheet. I need to calculate totals for each month above this columns so lets show it as this:
A B
1 100
2 150
3 220
4 300
Gross 770
How can I set up a macro to always calculate what my gross is setting a condition to find "Gross" and then somehow select the cells above it up to A1? I will have another cell as "Gross" for February under the rows of information for January. I am not at all sure if this can be done.
I am trying to set up a database to collect information on students behavior. We need to collect the frequency of 3 things-time of day, behavior, and correction. Can I do this in Excel? How? Is there a way to write a correlation that will count the occurrence of words?
View 9 Replies View RelatedHow do you set the range with whats below? Right now its looking at 4,2 only and if extend to look all the way to 19,2 it will just copy the whole screen. I need it to look at 4,2 and then move to 5,2 and then so on once it has copied all that information to the sheet ...
View 7 Replies View Relatedi have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
I just received a massive worksheet full of information for mailing labels. It's all in columns-which is excel. Is there an easy way to set this up for mailing labels? I've tried to import it into word, but I'm not getting anywhere. Is it possible to change the way excel displays the cells? To a point where I can have the address beneath, then the state, zip, etc?
View 9 Replies View RelatedI have an excel workbook with multiple worksheets(tabbed across the bottom of the workbook). How can I set up a menu of the worksheets on the left hand side of the workbook that enables me to jump to that worksheet?
View 4 Replies View Related