Is there a way that I can set a single worksheet in a workbook to always be on manual calculation, but keep all other sheet in the workbook set to automatic?
I want to be able to open the workbook, any calculations to perform automatically and then i will select the 'manual' sheet and perform these calculations manually. I also need to these settings to always apply each time i open the workbook.
I'm trying to turn calculation to manual, but there does not seem to be an Options button under tools on the mac I'm using. I've checked another mac and it is also missing. I'll probably end up using a pc for the calculations anyway, but I was wondering if anyone knew what was up?
View 3 Replies View RelatedIs there a way to make excel 2007 pop up a warning whenever calculation is set to manual by a macro or any other means? I have on several occasions noticed formulas not working, only to discover that calculation was set to manual without me noticing. And then I don't know how much of my work may have been afffected. This seems like a pretty vital piece of information, and I am surprised that it's not made more obvious.
View 11 Replies View RelatedI am trying to calculate the present value of a terminal period in Excel. The manual calculation and excel PV function are off by about $98,000. Both calculations are using the same capitalization rate and terminal life. My PV Excel formula is as follows: =PV(discount rate-growth rate,remaining term (years),-terminal cash flow,,0)*present value factor in last year of cash flow) What is causing the difference in values? Is there something in the Excel formula that is causing the difference?
View 1 Replies View Relatedhow does excel determine if it opens a file in manual or automatic?
how can i choose that excel opens every file in calculation manual?
I am on a Mac running OS 10.4.11. Whenever I launch Excel 2008, I have to go to Preferences and set Calculation to automatic.
Then Excel calculates automatically until the next time I launch the program. Then I find it has defaulted back to manual.
Is there a way of using VBA to check which calculation option is on - "automatic" or "manual" ?
View 3 Replies View RelatedI have a set of procedures that require auto recalc to be on to work correctly. I've tried application.volatile and Application.CalculateFull with no luck. I'm trying to put together code that makes sure recalc is on, but that first determines the current recalc status and then changes it back to Manual when necessary. I don't know how to determine the current status. The following code should work if the red sections are fixed.
Sub TempAuto()
Dim CurrentState As unknown
CurrentState = Application.Calculation status
Application.Calculation = xlAutomatic
If CurrentState = Manual Then
Application.Calculation = xlManual
End If
End Sub
In as much as I would like to heed the advice of this site to avoid setting excel calculation to MANUAL, I think I have no choice this time. I have a file that uses a lot of SUMPRODUCT(--) and array formulas. DSUM would have been faster but this file I am working on will be sent to users who barely knows excel. When they need to insert rows, the DSUM criteria will have to be reestablished and I do not think they are capable of that. Anyway...when calculcation is set to manual, all excel does to warn users is the little test "Calculate" in the status bar. What I would have liked is that a red button with text "CLICK TO REFRESH" to appear when calculcation is needed i.e. status bars is showing "Calculate".
View 2 Replies View RelatedI know how to turn off automatic and manual calculation modes manually in excel or through VB. But is there a way to make the automatic calculation mode ignore changes in certian cells? It would be good if you could right click on a cell and turn this on/off as an option. I assume I will have to code this in vb somehow, but I am a novice. Something like:
Sub test123()
For Cells = Value.Range("I7:R22")
Application.Calculation = xlCalculationManual
Like I basically want part of my sheet to be set to manual calculation mode, and partially to automatic...
I want a specific workbook to be always on manual but when I open other workbooks I want them to remain on automatic even though the first workbook is set on manual through vba code. Is that possible to be done?
This is the code I run:
Private Sub Workbook_Activate()
With Application
.Calculation = xlManual
.MaxChange = 0.001
.CalculateBeforeSave = False
[Code] .....
I know that Application. Calculation refers to all open workbooks but I don't know the code to specify the manual calculation to this workbook only while others are open.
Recently the company I work for moved onto Citrix and we found unless you limit the number of processors that Excel can use you can end up with performance issues. We believe the performance issues are caused by Excel taking system resource away from the network controller on the virtual PC and causing lookups to essentially hang Excel. So I want to set the number of processors Excel can use to 3 which leaves 1 alone, when we do this for users who are having troubles this has always fixed the issue. However as Microsoft wont let currently control the number of processors used by Excel with group policy or registry the only option I have found is using an Excel add-in which I found on this website: [URL] ..........
Below is the code I am using in my add-in, which works perfectly for any new documents which are created in Excel. My problem is I can't get the add-in to apply to existing documents and I can't understand why. I have saved the add-in as an XLA file and placed it into the C:Program FilesMicrosoft OfficeOffice14XLSTART folder. If I open the existing document and then double click the add-in, then it applies I just can't get it to run automatically.
Private Sub Workbook_Open()
' Manual Mode '
Application.MultiThreadedCalculation.ThreadMode = xlThreadModeManual
' Use 3 CPU '
Application.MultiThreadedCalculation.ThreadCount = 3
End Sub
Is there a way for me to have a formula perform its calculation one time only... meaning that if the precedent data changes it (the formula) won't compute again, thus leaving the previous number it calculated unchange...
View 9 Replies View RelatedIs there any way to automate the calculation of a single sheet? IE to calculate when moving from cell to cell after entering data without calculating the whole workbook and any other open workbooks.
View 9 Replies View RelatedI have a WorkBook with each sheet being a calendar month. I want to set the ActiveSheet as the current month so each time I open the WorkBook it opens to the current month WorkSheet not the last WorkSheet I was viewing.
View 12 Replies View RelatedWith Wb.strMyBookINT
Set S70Wscopy = Sheets("s70 pivot data") 'set s70 pivot data sheet for kpi 44 s70 pivot data
Set IMFWscopy = Sheets("imf pivot data") 'set imf pivot datasheet for kpi 44 imf pivot data
End With
With Wb.strMyBookEXT
Set IMFEXWscopy = Sheets("imf ex") 'set imf ex sheet for kpi 15 imf ex
End With
correct syntax to set these sheets?
I need to prepare count sheets for stock take on my company and I have a long list for data with hundreds of locations. What my colleagues have been doing is to filter the locations 1 by 1 and clicking print because we want the page numbering to be 'page 1 of 3', page 2 of 3 etc. for each location.
For example
Location a has 2 pages we want it to be page 1 of 2, page 2 of 2
Location b has 1 page we want it to be page 1 of 1
This is so that we can detect if any count sheets have gone missing.
I want to be able to print everything at 1 go, without filtering the locations manually and clicking print as it takes hours to do so.
Is there anyway I can do it? I have some knowledge on excel but not macros.
i want to set the minimum to be 20 less than the minimum value in the data, and the max to 20 more than the max value of the data.
View 9 Replies View RelatedWhen I hit the print button the worksheet prints on the paper in the bin. However, there are times when I need to print the worksheet on different paper which requires me to go into the properties and change the paper source from Automatically Select to Manual Feed. I have been trying to created a macro what will switch to Manual Feed, print the worksheet and then switch back to Automatically Select but have been unsucessfull.
View 3 Replies View RelatedI am trying to setup a search page in a worksheet on a document. I want to be able to search by an indicator (DID#), but there maybe multiples of the same (DID#) in the data. I want to be able to have each instance of the multiples displayed on the search page. In addition, I want to reference other data that matches that (DID#) in separate cells.
Please see below, I want to have a search area that I can input the DID# and have a return of the corresponding info for that row. If I search "123" there are 2 entries and will need both displayed. The data is much bigger, but this is just a sample.
Date
DID#
Location
Type
Owner
12/13/14
123
Anywhere
Flooring
RL
[Code] .........
The user is asked for one piece of information "Enter the ID Number.
What the macro should do then is go to Wks1 find the ID Number and change some cells as a result. This bit works.
Set Wks2 = Worksheets(strWks)
7 rows from the bottom.
My intention was to capture the the name of another worksheet which is held on the same row as the ID Number on Wks1 and call it strWks.
Then further down the macro set the value of Wks2 to that of strWks so that the macro will then go to that sheet and remove data from the row with the same ID Number.
I get a Time Run Error 9.
It just seems to be the bit at the bottom where I am trying to identify Wks2 using strWks.
Sub Macro01C_Auto_Resign()
Dim Wks1 As Worksheet, Wks2 As Worksheet
Dim strFind As String, rngFound As Range
Dim lngRow As Long, rngUnion As Range, strWks As String ............................
Subcript Out Of Range Error Coming Now For The Code Which Works For Me Before
Sub WHideRows()
Dim rRange As Range, rCell As Range
Dim strVal As String
Set rRange = Worksheets("WIED PROBLEM WELLS").Range("A11:A110")
For Each rCell In rRange
strVal = rCell(1, 3) & rCell(1, 4) & rCell(1, 5) & rCell(1, 6) & rCell(1, 7) & rCell(1, 9)
rCell.EntireRow.Hidden = strVal = vbNullString
Next rCell
End Sub
i am using the code above to hide the rows which doesn't have any values in all the following Cells 3,4,5,6,7 & 9 or Unhide the rows if there is value in any 1 of the following cells 3,4,5,6,7 & 9 from row number A11 to A110.
The same code works for me before. But now the code is not working. It says below the error message
Run-time error '9':..................
Broadly, my workbook contains 5 worksheets. Worksheets 1, 2 and 3 contain calculations, worksheet 4 contains a summary of calculations from worksheets 1, 2 and 3. Worksheet 5 is a data table used for worksheets 1, 2 and 3.
I need the worksheets to calculate in the following order:
1. Worksheets 1 and 2 extract data from worksheet 5.
2. Worksheet 4 captures that data.
3. Worksheet 3 uses the data from worksheet 4 and extracts data from worksheet 5.
4. worksheets 1 and 2 recalculate using the calculation from worksheet 3.
5. Worksheet 4 captures the refreshed data from worksheets 1 and 2.
Is there a way, using formulas in the worksheets, to ignore worksheet 3 on the first iteration of worksheets 1 and 2, and prevent recalculation on the second iteration of worksheet 1 and 2?
In my mind I can see Excel simply recalculating over and over again, or will it stop. Is there actually a "problem" here or am I perceiving something that will not occur?
I use VBA's WorkSheet_Calculate event to detect when a cell of particular interest calculates to a specified value. It works well as long as there is only one worksheet (tab). However, when I duplicate that tab (and the final app could have up to 10 copies) to run a different set of data concurrently, I get bad results. The data is online, real time trading data, with each selected stock being tracked in a different tab.
Apparently both (or all) tabs in the workbook react to the same event, whereas I would assume that the event routine in each tab would react only to a calculation in that tab. If this is in fact the case, is there a way to a) make the event routine in each tab respond only to a calculation in that tab, or b) upon a calc event anywhere, determine which tab it occurred in?
Here is the present event code; right now it reads exactly the same in every tab. As long as nothing is happening in any other tab, it does its job correctly.
I am trying to do is trigger an event when a cell changes, and this cell is updated via a linked drop-down box.
The issue is that the code seems to work fine (in about 10 seconds or less) if a manual calculation is entered into the sheet - but when it's done via the drop-down box, it takes about 3 minutes to complete the macro.
I have a workbook that has many simple functions moving data around to different sheets and processing some if statements on some of the data. The problem that I am running into is all of the data is initially pulled in from a SQL DB, and I believe that the workbook is calculating many of it's if statements, prior to all of the SQL data being loaded, therefore, many of the worksheet formulas are coming up with the wrong result. Is there a way to delay the calculation of all the basic worksheet functions, so that I can ensure that all the data is in the workbook from SQL, before they all fire. I have attempted to use Tools--Options--Calculation--Manual Calculation, but it appears that even though I have things set that way, all of the formulas in the workbook have already pulled their values through.
View 2 Replies View RelatedI have a rather large spreadsheet that takes a long time to calculate. One sheet has the data (about 2800 rows by 650 columns), with samples in rows and data for each sample in the columns. A second sheet has functions to group the data according to predefined patterns. That second spreadsheet is about 800 columns wide and as many rows as I need it to be, as the samples don't need to be analyzed all at once.
Ideally I would like to do all samples at once by making the second spreadsheet 2800 rows high, but the calculation time is just way too long. And there's the problem. The calculation time seems to increase exponentially with the number of rows I calculate at a time. I ran a few tests making it different sizes, and here are the results:
rows
time(seconds)
100
3.5
150
12
200
23
[Code]...
I tried both HLOOKUP and INDEX/MATCH functions and it didn't make a lot of difference. These numbers are for INDEX/MATCH.
Graphing these numbers show that it follows an exponential curve pretty closely. What is interesting is that the progress indicator at the bottom of the screen finishes in a few seconds, about 5 seconds for 350 rows, and I can see the new data after those few seconds. But then it sits and appears to do nothing for the rest of the time. So, for 350 rows, it looks to be done with the calculations within 5 seconds, but then it freezes for another 2 minutes with CPU usage maxed out before I can do anything with the program. That actual calculation time seems to scale linearly with the number of rows I calculate, but the time after it finishes calculating before it finishes whatever else it's doing scales exponentially.
The spreadsheet does have a macro and a couple of other sheets and a macro that do some later analysis and I wondered if that had something to do with it. To check that, I created a new spreadsheet and set it up the same as the original one, with the data in one spreadsheet and the INDEX/MATCH formulas in the other. I copied the data over, but setup the formulas new without copying/pasting anything. It didn't make any real difference.
I have written a custom function to be called from worksheet cells. The function is basically a wrapper function for VLOOKUP on a single table. It makes cell formulas shorter, easier to read and self-documenting. Here's a much simplified version of the function:
View 3 Replies View RelatedI have workbooks in which summary tables are generated by lookup formulas. Tables are on different sheets but all use the same lookup value by referring to a cell on the 'master' sheet. The lookup value appears in cells on all sheets, by reference to the master sheet (e.g. [formula] = mastersheet!$B$2).
The master sheet contains the main summary table and is copied and detached for distribution, using a macro. For practical reasons, this is done in two stages, first copying the sheet within the workbook (to make minor alterations), then moving it to a new book to save and distribute.
This is where the problem arises. After the sheet has been detached, we find that if we now change the lookup value on the master sheet in the original file, the tables on that sheet will update normally, but the cells on other sheets remain frozen at the previous value and the tables on those sheets do not update.
The only way round the problem is by Shift + Ctrl + Alt + F9. (Maybe I should add that all my workbooks are always set to automatic calculation.)
The macro itself is not the cause of the problem; if we follow the same procedure manually, the result is the same. However, if we move the sheet in one step, eliminating the intermediate copying stage, the problem does not arise. But this is evading the problem, not solving it, and I would be reluctant to have to resort to this.
The original problem remains as stated, viz. failure of automatic calculation.
I have wind speeds and elevation data for 200 points. Each variable needs to go into a calculations spreadsheet on another worksheet. Once each variable gets put in the calculations automatically spit out the result. Now I need to use macro to automate this process so that it will repeat the steps I took for every line of data.
In English code terms, I want the Macro to say, take wind speed number and input in wind speed cell in calculations spreadsheet. Then take elevation number and input in calculations spreadsheet. Then take result number from calculations spreadsheet and input in cell. Then loop to go down the 200 lines of data. Is this possoble? Sorry for the non-technical wording.
