I am looking for some examples of simple math (Adding, Subtracting, Dividing & Multiplying) using Text box values in a userform.
I have 6 textboxes. 3 of them for data entry and 3 of them for calculating from the other three.
I am not looking to work of any worksheet, it must be done in the user form.
I am trying to put together a basic sheet with what I think is basic math, however, the multiplication does not seem to be working properly.
Field 1 is land value, field 2 is total acres. The math I have in field 3 is to give me a value per acre. Here is that formula: =Sum(B3/C3)
I have set the field to a number field with two decimal places.
Field 4 is Total Dry Acres field 4 is calculated to give total value for dry acres (here is where I am having problems) Here is the formula: =Sum(D3*E3)
Here are the numbers: Field 1 = 218702 Field 2: 1536.51 Field 3 (calculated): 142.34 Field 4: 1171.75 Field 5: 166791.54
It all looks good on the spreadsheet, however the field 5 number is not correct.
Break it out on a calculator: 218702 / 1536.51 = 142.34 (rounded)
Now 142.34 * 1171.81 = 166795.44
so working on the calculator, there is a difference of 3.69 between the two.
I need a Simple Timer on Userform which uses Excel files through VBA.
After getting User's choice, say the text "Ben", which is a portion of a name, my code collects data of all records having "Ben" from the Excel file, which has about 5000 records (still growing) and displays the resulting data of the selected records in Listview control. It is a lengthy code.
If a particular search has more records to display, then displaying them on listview control takes more time. So, I am using a progress bar to tell the user that work is being done.
Is it possible to run a timer to display something like a digital clock to show the user the elapsed time. In addition to the progress bar, the user will also see the running clock (or timer) and wait until all chosen records are displayed.
I have downloaded the sample file at the bottom of the 'Contextures' webpage that explaines how to create a simple userform...
[url]
at the very bottom there is a 'Download the sample file' link
This simple form alows the user to input 4 bits of data, PartID, Location,Date and Qty. This data is saved in another part of the worksheet called 'Partsdata'
What I want is somehow for the user to be able to seach for a PartID from the list in the Partsdata worksheet. When this PartId is found, display the userform in a way that the data relating to that PartID can be edited and then re-saved when the user clicks on the 'add this part' button.
For example....
Msg Box or user form dispalyed stating...."Enter PartID to edit"
a search of the PartID column (columnA) in PartsData worksheet is carried out and when the matching PartID is found the corresponding information is displayed in a user form that can be edited by the user.
Once the user has made any changes to the data shown, the user clicks on the 'Add this part' button and the new data is re-saved using the same partid reference.
I am creating a userform in excel 2010 (64 bit) that is a 14 question survey. I am trying to get a simple datepicker to appear when user clicks or tabs into a designated textbox which I have named TextBoxDate. I would then like the user to select a date and for that date to appear in the dd/mm/yyyy format in the textbox. Should be easy, right?
I have tried downloading several datepickers, most from the open source thread Non-activex Datepicker Calendar Control on this site. But I am unable to successfully tweak the code to get the datepicker to work how I want. I also am not looking for a datepicker that is complex with max and min date ranges etc.
So I am supposed to take the names of worksheets and populate a listbox with them, simple enough as I had it running, but now it isn't working. Here is my code:
Code:
Private Sub UserForm1_Initialize()
Dim ws As Worksheet
i = 1
For Each ws In Worksheets
Worksheets.Select
Sheets(i).Activate
ListBox.AddItem (ActiveSheet.Name)
i = i + 1
Next ws
[Code] .......
Why it isn't populating the listbox anymore? There arent any errors just a blank box.
I am working on a time table worksheet and I need to insert a time Offset that can range from 5 minutes to an hour with 5 minute increments. The message box or user form will prompt, "How long is your Offset:"
The problem is that I only know how to do make a drop down list that is populated from cells on a sheet. Do I have to use a user form?
I am trying to compare to values that a user inputs in a user form. It's ok if they are not the same I just want the user to know it. I am only including the part where the if statement is failing:
VB:
If Me.VSLongQuant.Value <> Me.VSShortQuant.Value Then
MsgBox VerUnBal
If VerUnBal = vbNo Then
Exit Sub
End If
End If
I have VerUnBal as Long and defined as:
VB:
VerUnBal = MsgBox("The Long and Short option Qunatities are not equal." & Chr(13) & _
"Is this intended to be an unbalanced vertical spread?", vbYesNo, _
"Unbalanced Spread Alert")
I can provide more info as necessary. There are two problems 1) the message box is appearing whether the numbers are equal or not, and 2) clicking No in the message box does not cause the Sub to exit.
In the two columns listed below I need to figure out what formulas could be used to create the "Last Status" column. To better understand the dynamics of the two columns, pretend that the cell mark in bold is where you are currently residing in the worksheet and you look upward in the first column to see what the last status was and you use a formula to enter this value into the cell just to the right of the bold B. T
Status
Last Status
B
B
[Code]....
I have a list box that separates values based on simple criteria. I have these sections separated by
Code:
.Add Item "-------Cat 1------"
' Cat 1 items here
.Add Item "-------Cat 2------"
' Cat 2 items here
'etc
My question is can you add the "----Cat 1----" into the listbox without being able to select it? Or is there another way to separate listbox entries?
I have a data example
Cell A1 which contain text I.E = "Words"
I have link B1 To cell A1 I.E = A1
Now what I want is I want the last two words or any alphabet between alphabet
to be bold
W O R D
Example
WORD or WORD
Any alphabet between word to be bold upon my requirement.
Instead of linking that cell to another cell , i want any value when entered into that cell.
That alphabet automatically becomes bold as this will not be requiring linking to that cell
This is my formula with concatenation: =K3/K1*100 & "c" & " Each"
This is the result of the values in K3 divided by K1: 6.41666666666667c Each
I would like to limit the decimal places to two: 6.41c Each.
I have tried to format the cell and none of the formatting options have any effect.
If possible I would like to use the rounding function but I do not know how to combine the formula + text + rounding.
I've created a userform with a text box and a command button (Enter)
On clicking the command button I'd like whatever text has been entered into the userform to be put into a cell (Say A1).
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedAttached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
i am trying to make an excel sheet that does calculations to help drydock a submarine....
docking math is used and it works as follows:
6-11-7
6-11-7+
6-11-7++
6 is feet
11 is inches
7 is 1/8ths
+'s are 1/16ths
so i want to be able to have a list of set measurements like above and then have one set measurement be subtracted from the list. like
12-4-6+
13-5-4
14-2-4
and have 6-2-5+ be subtracted from all of the above and be displayed on a second page. I have slammed my head against the wall for about 3 days now and i am a excel newbie. so if i messed up somewhere or anyone could help i would greatly be appreciate it.
Using vba textboxes too do math .I have attached a sheet too explain, not sure if its possible. If it is I know this is the place too find out.
View 4 Replies View RelatedHaving a real hard time with this,able to do it in normal excel, this project I'm using vba. Here is a example of what I can not do, if you can give a a formula for this I will be real Happy.
View 5 Replies View RelatedI am trying to create a macro that will do some basic math using J, I as referencing.
Sub Table()
Dim Temp
J = 2
I = 1
For Temp = 1 To Question
Cells(J + 35, I).Formula = (Cells(J, I + 2) + Cells(J, I + 2) * Cells(J, I + 3) - Cells(J, I + 4))
J = J + 1
Next
End Sub
how do I get the math to work without the R1C1 referencing?
Trying to compute annual change I've always used the formula "(b1-a1)/a1" - where b1 is the current year, a1 is the prior year. I've been asked to compute average annual change over a number of years and thought simply by using the above for each year and then taking the average of all these, I'd be ok. I recently found a formula as follows: "(y2/y1)^(1/n)-1", where y2 is current year, y1 is 1st year I have data, n = the number of changes.
View 7 Replies View RelatedI'm trying to do: Let's say I have a simple userform with labels as follows:
(Label1) John's birthday: (Label2) 12.10.1974
(Label3) Mary's birthday: (Label4) 15.03.1978
(Button1) Change Birthdays
Let's say want to change the birthdays I see, so I press the button and enter the new values through another userform with inputboxes.
How do I make that change permanent, so that next time I start the macro in the labels 2 and 4 I have the last entered values for the birthdays???
i have a formula that i am trying to place in excel, however i am not sure what the function is I need to call or if there is one. the formula is G(sec Z)
View 2 Replies View RelatedHow do I correct to make conditonal formula with number values ?
My main worksheet has at leat 24 columns and as many as 30 rows, all have
numbered values. Rows are defined names.
I want to get average values when at least 2 conditions have certain values.
I tried =SUM(IF(AND(MapKpa:MapKpa=40),(RPM:RPM=1000),grmcyc:grmcyc))
and answer given is really total of all 30,000 row values for grmcyc and not
when mapkpa values = 40 and RPM = 1000.
Also best would be if the conditions allow lets say when Mapkpa is between
40 and 45 and RPMs between 1000 and 1500 to have a window of grmcyc average
I used Sum but really want an average of grmcyc when Mapkpa and RPM meet the
conditions so I can build a results table of what the grmcyc average value
was from 20 to 105 KPA in 5 KPA windows along with smaller RPM ranges.
I have a spreadsheet acting as a check register. In looking through the over 2300 entries, I am getting "odd" rounding issues. I have attached a small piece of the worksheet to demonstrate this quirkiness. As you can see, I am adding numbers out to two decimal places (which should result in two decimal place answers). The result for 11/11/2002 has become a more complex number. And, the result for 11/14/2002 goes back to two decimal places.
I have upgraded my office suite since 2002. Could that be an issue? I prefer not to have to "force" the rounding =round(result,2) to solve the problem.
I have a user that wants me to calculate a value for x. The user will input the variables a and b into this equation: b/a = .0231x * EXP(.0439*x). The user insists that the solution to this problem must be arrived iteratively, honing in on the correct answer. Is that right? It looks to me that surely there is a way to solve this mathematically.
View 7 Replies View RelatedCan anyone list the formulas needed in Excel
+
_
x
divide
Let's say in cell A1 I have something like "10-25" or "4+4". I want to keep A1 just like that, but I would like to solve the arithmetic in A1, in cell B1. So B1 would need a formula that gives the answer "-15" or "8". How can I do this with large data sets?
View 7 Replies View RelatedI am looking for the easiest way for my worksheet to perform the following:
My 1st sheet (Sheet1) has columns A-C
In Column "A" there is a Cust # call it "P200"
In column "B" I have an invoice amount of $500.00
In column "C" -In this case, I need this field to calculate 15% of the amount in column "B"....and return the result of $75.00 (however, this 15% figure will vary based on data looked up in (Sheet2)
ie... in (Sheet2)
Column "A" will list all cust #'s that my company has - A1=P100, A2=P105, A3=P125, A4=P127, A5=P200 etc....
Column "B" has each respective discount amount for that customer by %... B1=10%, B2=10%, B3=12%, B4=20%, B5=15%
So the macro I need for (Sheet1- column C) will need to search "Sheet2" column "A" to find the "P200" out of the long list and then take the corresponding % amount in column "B" (in this case it's 15%) and use this figure in (Sheet 1) to perform the calc.
I need to sum column L then divide that by 36 then multiply that by the sum of column N. How can this be accomplished with a formula?
View 9 Replies View RelatedGiven a list of numbers and a list of 'allowable' operators, come up with a specific total. ("The numbers game" on countdown on BBC2.... ooooh Carol Voderman)
For example, given the numbers 1, 3, 4 and 5 with valid operators +, -, /, * come up with a solution equal to 15. All numbers must be used once only. Use operators as often as required. The specific example above was given to me and I personally think its not solvable (might be a practical joke). But I am wondering is it possible to prove this through assertions or develop an algorithm to solve such puzzles. I can get 14 and 16, but not 15....