As you can see, the first names aren't sorted 100% alphabetically. I think issue stems from the years 2001 n-2006 n. I have to use the 2001 n since its a different data than the normal 2001.
The default sorting was by year:
2012
2011
2010
2009
[Code] .......
So I want it to sort by last first, then first name. Then it should sort by the default sort I already had in the left column (years).
I have the following code that sorts each column sperately and it works, but believe this is a long way round and not the best way. I need the columns sorting alphabetically seperately and each has a header row.
In the attached example file, I have two tabs: options and sets. The options tab is to be populated from a form. The sets tab is to draw data from the options tab to create teaching sets. I have managed to create an array formula that does this for me, but what I would like it to do is sort my resulting list alphabetically. For reasons that I won't go into, I need the data on the sets tab to remain in three columns: First Name, Surname and Form.
This is the array formula I am using at the moment: AliGW - Example.xlsx
I have been looking at Macros that sort worksheets alphabetically, but there are sheets within my workbook that I want to leave static. I have two sheets, names 'Start' and 'Spacer', what I would ideally like to have is a marco that will alphabetically arrange the sheets between these sheets, leaving the others where they are and obviously leaving 'Start' and 'Spacer' at the front and end of the range respectivly!
I have data arranged in columns A-F. I am wanting to set it up so those groups are all based on the name in column A:
Name Location Quantity Notes Etc.
Joe Likes bread Hates butter Jane
Julio
Column A only takes up one space, while the other columns take up 3-4 spaces on average. I am looking to sort column A alphabetically while maintaing the spaces between so that the info doesn't become jumbled.
I have a potential of 5 columns of numerical data (simple number entries) which are entered manually in no particular order.
Is there any way of sorting the data so that it is presented in numerical order (smallest to largest) starting with the smallest figure at the start of column 1 up to the largest figure at the end of column 5.
How do I sort multiple columns at once? In other words, I have a chart that is a series of 1s and 2s, and I need all of the 1s to drop to the bottom, so that I can do a rudimentary chart in spreadsheet form. My chart has dozens of columns like so:
In Column A there are randomly assigned numbers using the RANDBETWEEN function.
In Column B there are three possible values X, Y, and Z.
I want to create a sort order where "X" is always at the top but then the rest of the rows are randomly sorted by column A (Y and Z values are intermixed).
Currently I tried to use a Custom List and the value is "X" to sort first, and then a seconday sort of Column A. The problem is that column B is always sorted by X then Y then Z where I am trying to get the Y and Z values to be randomly intermixed based on the sort of the random numbers in Column A.
I know I can manually do 2 seperate sorts each time, but I would like to save a sort list to the file so I recreate that sort over and over again.
1) If there is a zero (null) value in all 3 months, these records should be at the bottom sorted by record name (I did not show this field in my file). 2) If there is a non-zero (non-null) value in any of the 3 months, the records will be sorted with each other by total change.
Is there a way to do this without me doing sorts multiple times and manually moving rows of data around (which is what I have done to arrive at the list I have attached)? I am not experienced with VBA or Macros, and would prefer a detailed explanation if a solution is using either method.
I have attached an example spreadsheet with two tabs. The first tab (Matrix) shows raw data scores - there are 28 measures in Column A and Participants in Row 1. There are always 28 measures but participants can vary. What I need to happen is to sort each measure in a Lineup tab i.e. rank all the participants listed in the Matrix tab from lowest score to highest score for each of the 28 measures. Obviously this can be done manually but a VBA/macro solution will be so much faster and easier. Unfortunately I have to keep the data in this format so the macro will need to transpose the data to get into the formt in the Lineup tab.
I was handed a pdf of some leads by a co-worker. Finally, I got the data into excel but it's in a pretty useless format... 30,000 rows of contact info with no rhyme or reason. I want to upload this into our CRM, but I need to get all the different bits of info into separate columns. I'm no excel pro, but I managed to use an Excel plugin called ASAP tools to bring some order to this chaos... All names have a blue cell color, all titles have a green cell color, work phone is red, and so on.
Does anyone know a way that I can sort these into separate columns? I've trying playing with the Filter function, but it hides rows which makes the output useless for my purposes.
Is there a code or some way for me to sort 4 columns together? I want to sort a list of employees and for each employee theres a column with their Lost Business, customer satisfaction, and two more columns. I want to sort all the columns at the same time so that the best employees overall will go to the top of the list and the worst ones will be at the bottom. Whenever I use the sorting feature it does each column independant of the others so everytime I sort a new column it just moves around the last one I sorted.
Im not entirely sure about this but it seems like if I have data in columns A - Z and sort in one of them, the data in Columns AA - AZ does not move accordingly rather it stays fixed.
I have a spreadsheet that is populated my Concatinating data from other worksheets. Some of the results are numbers, some is data while others are blank spaces and othersare set by the concactenating default of "" when the criteria is not met. I need to sort these colums. However it seems that the default "" from the formula is not a BLANK or a ZERO or an empty cell.
Those cells will place themselves at the top of the sort. I need to eliniate them. I have copied and pasted as values but that has no effect. Ironically I can identify the cells with an if statement so what I need help with is generating a macro that will cycle thru the range of results and delete the approriate cells.
I have tried the following:
lr = Range("A1").End(xlDown).Row ' Last Row lc = Range("A1").End(xlToRight).Column ' Last Column For Each cell In Range(Cells(1, 1), Cells(lc, lr)) cell.Select AC = ActiveCell If AC = "" Then Selection.Delete Shift:=xlUp Next
But this does not work as it cycles top to bottom and leaves behind 1/2 the problem cells.
I have an issue with some data that I need to sort into several columns. Basically, I have a column that has data listed in each cell like this; A 567 T 1 D3. What I want to be able to do is sort that data into several columns. I am not sure how to do this at all. I have attached my data to be looked at. I have already started the process but manually, and I don't feel like having to do this manually as this is very time consuming considering I am trying to sort the data into ~1927 rows and 5 columns.
I need help with either a formula or macro for sorting data into specific columns. I need the entries under the headings Ar,Bj... to be sorted into the correct columns. To add to the problem, the data may not be exactly the same as the heading.
Attached is an simple example of a spreadsheet where the top is the original and the bottom is what I need the final outcome to be. The data is pasted from a different spreadsheet and will be changing each time.
I have three columns, one column is time every two seconds with data associated that time, and one is time every minute with an associated tidal height.
I want to sort my data so that for every 2 seconds I have an associated tidal height for that minute.
eg: what I have: Time Time Tidal Height (2 sec intervals) (min) (meters) 1:15:00 1:15 1.342 1:15:02 1:16 1.221 1:15:04 1:17 1.115 ... 1:15:58 1:43 0.024 1:15:60 1:44 0.012 1:16:00 1:45 0.008 ....................
I'm managing a World Cup Prediction League and have been trying to create a spreadsheet that will eventually feed in to a league, positioning each player in descending order. However, I would like to use three columns to determine how to position the players.
EG.
Priority 1 - Column D - Total Points (Rank from Highest to Lowest) (if there are players with equal Total Points in column D, then) Priority 2 - Column F - Correct Scores (Rank from Highest to Lowest (if there are still players with equal value after Total Points and Correct Scores, then) Priority 3 - Column F - Incorrect Scores (Lowest to Highest)
I've tried for hours to work this out but can't. It would save me hours of work each day
I have attached the document : WC Prediction League EXAMPLE.xlsx
I have two sets of 2 columns. One column in one set is identical to a column in the other set, but they are arranged in different orders. I would like arrange those two columns side by (matching their numbers) so that I can find the average of the two non-identical columns.
I'm trying to sort by City first, then by Report #, but keeping the highlighted rows together. If I use the custom sort it will through my D2's at the bottom and not keep them with their city, report, and D1. How do I get them to stay together? I have attached my document example.
I have a worksheet with columns of Unique Words and corresponding Frequency of Occurrence for several years. I would like to sort the data so the rows match up on same Unique Words across years.
I have a spreadsheet on lets say 10 columns, now col 1 and 9 are locked so they cant be selected. Col 2-8 can be sorted by selecting them, but information in col 10 does not sort.
Question is there a way of connecting the cells in col 10 to the cell in lets say col 2, so thay when you sort the rows and cols between 2 and 8, the cells on col 10 are sorted as well As i have noticed you cant sort two differenr selections...???
Need to sort part of an Excel worksheet across multiple columns.
For example data is:
ABCDEF1 Machine 4394264394294394434399834399842 Model TD860TD400TD860TD620TD6203 Pgm OPTABCOPTEP2EP24 Start 5/31/119/1/115/1/096/15/092/1/085 End 2/28/158/31/125/31/114/30/108/31/09
I need to sort it first by Pgm, within Pgm by Model, and within Model by Machine. I do not need to sort on Start or End
The results should look like: ABCDEF1 Machine 4394294399834399844394264394432 Model TD400TD620TD700TD860TD8603 Pgm ABCEP2EP2OPTOPT4 Start 9/1/116/15/092/1/085/31/115/1/095 End 8/31/124/30/108/31/092/28/155/31/11
After selecting the data to be sorted (columns B,C,D,E,F), I tried using "Sort Left to Right" under DATA-SORT-OPTIONS but it doesn't seem to work.
I have to filter data in one column and have it align with data in another column. I need to do this because I have hundreds of product descriptions that I need to match up with the appropriate images. All of the image names will be like the first row (1244-?????.jpg) The problem I am running into the text data I am downloading is not matching up with the images. I usually have more images than text and sometimes I will have text that has no corresponding image.
1244-540299.jpg Golden Poinsettia Triple Candleabrum 1244-540299.jpg http://img.auctiva.com/imgdata/1/3/2/1/0/4/0/webimg/539293145_o.jpg 1244-540300.jpg Poinsettia and Berry Triple Candleabrum 1244-540300.jpg
I want to sort columns A,C:P and use column C as the column that I sort and the other rows will move with column C. I want column B to stay and not move with the sort. How can I do this.
I'm trying to sort an array which is of variable height/rows when put on a worksheet. I need to sort by column C ascending (smallest to largest) and then by column D ascending (oldest to newest). I tried recording a macro but the code is just junk.
Code:
Dim BookSPSortingWorksheet As Worksheet Dim TR As Range Set BookSPSortingWorksheet = ThisWorkbook.Worksheets.Add Set TR = BookSPSortingWorksheet.Range("A1").Resize(UBound(array_book_SPNames), UBound(array_book_SPNames, 2)) TR = array_book_SPNames
Is there a way I can use the sort function like the below by indexing my TR range for columns 3 and 4?
