I´m using this code to create a messagebox±
Private Sub Workbook_Open()
Dim c As Range
For Each c In Range("E2:E126")
If c > -15 And c < 0 Then MsgBox c.Offset(, -3), vbOKOnly + vbInformation, "LET OP! Einddatum contract nadert!"
Next
End Sub
The messageboxes may only appear when the workbook is opened. The problem is that they appear when I change something in the workbook.
I want my macro on the IR Tracker sheet to run once workbook is opened. Is this possible?
I have attached the workbook for better understanding.
An external program opens and closes Excel Workbook (OLE). What is the VBA code so when the WB is opened, Macro1 will run before OLE closes that Workbook?
View 6 Replies View RelatedCurrently I am using VBA Code below to Stop Update links prompts
Private Sub Workbook_Open()
Workbooks.Open "C:TempBook2.xls", UpdateLinks:=False
End Sub
Is there code I can use such This Workbook so that I can save this file as another name and it will work? Biz Auto Merged Post;Dear All, I have found VBA code that works.
Private Sub Workbook_Open()
Workbooks.Open ThisWorkbook.Name, UpdateLinks:=False
End Sub
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View 2 Replies View RelatedAll i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedHow to Automatic open others Workbook when we opened the Master Workbook.
Examp.: I have a workbook (Master.xls), and when this file be opened, and then others workbook (Transactions.xls, Order.xls, etc.) is opened too.
I have a workbook that is a formatted report that I need to insert data from a name variable "CSV" file. I have created a macro in this workbook that calls an "Open" dialog for CSV files that I can use to browse to and open the source file. The macro then is supposed to "select all" copy and close the workbook then make the original workbook active and paste the data starting at row 2. The macro "seems" to be working perfectly except when I do the open the macro then makes the original workbook active, selects all copies then wants to close the original workbook. How can I tell the macro that the csv file that I just opened should be the active workbook, baring in mind that the name won't be known before the time it's opened so I can't hardcode the "active. workbook (NAME) "route.
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedI've started this thread a few weeks ago but didn't get any answers on how to solve the problem or if it was even possible to solve. I would like to know if is possible to set a reference to a NOT OPENED workbook. All the code I've tried so far didn't get me anywhere:
View 3 Replies View RelatedI am looking for a way to have Excel zoom to 120% whenever any workbook is opened. (My boss has poor eye sight...)
I set up a simple Macro
Code:
Sub Auto_Open()
ActiveWindow.Zoom = 120
End Sub
but I get an error that says "Run-time error '91': Object Variable or With block variable not set.
Is it possible to write code that can identify how a workbook has been opened i.e. has the workbook been opened by another workbook or has it received a double click event on the workbook itself.
If it is possible I would like to place the code in the open event of the workbook that is being opened.
i'm tyring to formulate a do loop that will basially loop until the workbook is opened. here is my code...
'CHECK IF OPENED WORKBOOK EXISTS
Dim myBook As Workbook
On Error Resume Next
Set myBook = Application.Workbooks(vCriteria & "ISPR.XLS")
On Error Goto 0
what i want is for it to loop until myBook is <> nothing... but i'm not sure how to do that.
I have an excel file on a share site which is accessed by several people. The first tab is set up as a home page which directs the person to the relevent part of the work book that they need. My problem is that as the person saves their updates it also saves the location of the workbook they were in. I want it to return to the " homepage" automatically each time it is opened.
View 5 Replies View RelatedI have a little issue with a list-box. When i open my workbook and i click on the List Box the list box freezes, excel doesn't let me select it until i go to design mode, select the list box then close out of design mode. This sort of "fixes" the issue but i would rather not do so this way.
View 2 Replies View Relatedmy workbook is finally working the way it should but every time i open it i get a security warning window with the options disable macros, enable macros and more info. how do i get this to not show up every time it's opened. this workbook will be used by someone other than me and i don't want them to need to do anything but open it and use it.
View 8 Replies View RelatedI have a workbook with about 30 tabs in it. It is currently protected by a password. The workbook itself has a couple of 1000 formulas across the tabs.
What I would like to do is to lock certain cells on each worksheet depending upon if the workbook is opened as "read only" or "in edit mode" (when someone uses the password).
So when someone uses the correct password, I would still like certain cells to be locked, or after the initial password is entered for editing, another popup box with "would you like to edit cell formulas? Y/N (only on selective cells), if no, then no editing on those cells allowed, if yes, then prompted to input another password to do this.
How do I automatically run VBA code when a workbook is opened?
View 7 Replies View RelatedJust wanted to ask all the VBA gurus if they would know how to put the number of times (i.e. in Sheet 1, Range A1) a Workbook is opened.
I then want to basically have the code delete every sheet if ithe count is > 50.
Is there a way that when the workbook is opened, it automatically jumps to the sheet that has today's date on it and highlights that cell.
I have 12 sheets, one for each month and labeled as such. The dates for each month in cells D5:AH5 on each sheet.
How can I ensure that a cell (A1) is defaulted to the current date each time the file (in which the cell resides) is opened.
A1 is a field of a form in which the user can enter a date. I would like it to default to the current date each time the file is opened.
I am trying to ensure that m work book keeps the same name even when I email it to others.
I have been told on this forum that it is possible for a workbook to check its own name once opened?
I have two different names that this file can be called 1st is the one that is in use all the time and the 2nd is a archive version where the name changes each month.
The file name I wish to keep the same for the no archived version is Toolbox and a predetermined number I have a workings sheet called workings and in a cell i have a formula =TEXT("Toolbox Application " & Cover!E10,) this will give me the file name that i need to check for example it could be Toolbox Application 00089 or Toolbox Application 00967.
I also have a cmd that archives the workbook and saves it as Toolbox and the Month it was for Toolbox for Jan for example
I also need this to open if it is an archive
if neither of the names match i need the workbook to close and a msgbox to tell user to rename the workbook correctly.
iam trying to populate another open workbook worksheet with the iformation inputed into the the InputBox
Private Sub Workbook_open()
MsgBox "Welcome to THE ESTIMATOR, Provide by Brisbane Marketing and Estimating Services!", 64
' If sheet was named by original open routine, exit
If ActiveSheet.Name = "Main Roof" Then Exit Sub
' otherwise
Do..............
I have a workbook that automatically saves itself when it is closed without prompting the user. Now I need to make the workbook automatically close if another workbook is opened.
if my_workbook.xls is opened and you open another workbook, I need my_workbook.xls to close instantly.
Is this possible to set a macro which will delete the file if opened on another computer? Ie say on WB open I want to set a macro that if Environ(“Username”) = “ABCD” then proceed else delete the file permanently from th e other computers machine. If deletion of file is not possible then deletion of sheets or contents of sheets should be deleted. The sheets will be protected. Expecting a solution to delete the file.
View 2 Replies View RelatedI'm writing a subroutine that asks the user to pick a file (using GetOpenFileName) and extracts some data from it, then closes the workbook it opened automatically.
Problem is that it seems I can only reference workbooks by index, which is a big problem if they have more than one workbook open. I don't want to have to force them to only keep 1 workbook open, that seems like bad practice.
importFile = Application.GetOpenFilename("Excel Files (*.xls), *.xls", , "Select field sheet")
If importFile = False Then Exit Sub
Workbooks.Open importFile ' Open the new workbook
importFile ends up returning something like, "C:Documents and SettingsMy DocumentsFieldBook.xls".....................
I've got a macro that searches & opens a most recent file. I'm trying to figure a simple way to bring to the front the workbook which is opened by the macro.
View 2 Replies View RelatedI have a workbook which should only be used between certain dates
In this example between 3rd March 2013 and the 1st March 2014
Would it be possible that if the user opens the workbook outside of this date range an error message could appear then the workbook would then close ?
I need an vba code that if my workbook is open say at 14:00 that it automatically save and close the workbook.
View 2 Replies View Related
