All i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
I want to transfer certain data from one workbook to another. The problem is that I want to copy certain rows from my main workbook which has 3026 rows to a smaller workbook which has 1545 rows, both workbooks have the same product numbers in column A - except my smaller workbook has 1481 products omitted
These are the first 3 rows in both sheets:
Main Workbook
ABA19
Dar ABACUS Spare Glass Dropper For ABA4750/5050/5250
ABACUS Spare Glass Dropper For ABA4750/5050/5250
ABA191
Dar ABACUS Spare String Accessory For ABA5240
ABACUS Spare String Accessory For ABA5240
ABA4750
Dar ABACUS 800mm G9 Square Flush Polished Chrome
ABACUS 800mm G9 Square Flush Polished Chrome
Second Workbook
ABA4750
ABA5050
ABA5240
As you can see both 'ABA19' and 'ABA191' are not included in my second workbook but 'ABA4750' is, therefore I want to only copy the row of data for that product in my main workbook to my second workbook.
Here is the scenario: I have workbook called Leads_2013-0215 it has about 10K records I have workbook called LawFirms it has about 4K records.
If the value in Column I in Leads_2012-0215 is present in column G in LawFirms, I want to add the value Law Firm to column AV in Leads_2012-0215.
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View 2 Replies View RelatedI have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
[Code].....
So I basically have a template workbook that the code is stored in. I need it to pull an entire row if Column C in workbook "rawdata" contains specific text, in this case "PRCH - Purchase".I have never had to do anything like this before, it has always been working in the same workbook. It's failing at the 'mp = ...' line every time. There might be other errors in the code too, I just cannot resolve the first one!
[Code] .....
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedCan I search a document without opening it?
If not how do I open a file if not already opened without using "ON ERROR"
How to Automatic open others Workbook when we opened the Master Workbook.
Examp.: I have a workbook (Master.xls), and when this file be opened, and then others workbook (Transactions.xls, Order.xls, etc.) is opened too.
I have a workbook that is a formatted report that I need to insert data from a name variable "CSV" file. I have created a macro in this workbook that calls an "Open" dialog for CSV files that I can use to browse to and open the source file. The macro then is supposed to "select all" copy and close the workbook then make the original workbook active and paste the data starting at row 2. The macro "seems" to be working perfectly except when I do the open the macro then makes the original workbook active, selects all copies then wants to close the original workbook. How can I tell the macro that the csv file that I just opened should be the active workbook, baring in mind that the name won't be known before the time it's opened so I can't hardcode the "active. workbook (NAME) "route.
I am trying to automate the process of filling out monthly reports and I have run into a problem I just cannot seem to work around.
These reports contain both weekly and monthly information, but because most months do not end on a friday or begin on a monday I have to have a couple of the week reports as partial weeks (e.g. April ended on a Thursday and so that week's report has both April 27-30 and May 1). When the first week of the next month's report runs I would like it to prompt the user to locate the last month's report, open the report, find week 5 of that report and copy the relevant data into the current month's report. (Hopefully that explanation is sufficient)
What I am running into is, after prompting for and opening the past month's report I am trying to select the Range A137:I232 on Sheet5 but instead the previous month's report just opens to wherever it was when it was last saved and won't select any ranges I tell it to, it just selects the range it was on last time it was saved. It will then copy that range and paste it into the Current Month's report.
below is my code ...
Trying to create a new workbook from another open workbook, then copying all the sheets that aren't called "Summary" to that new open workbook and then saving it. I get a subscript error on this line:
[Code]....
The two sheets are...
1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)
2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)
1. Copy both the files on your system under a particular folder.
2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10
3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".
Now write down the code by adding a Module in that excel sheet from the code window.
4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.
5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..
6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.
7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.
8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.
Please see attached files.
Book1.xlsx
test.xlsm
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
i came up with this..
Sub Copy_To_New_Workbook()
Application. ScreenUpdating = False
Dim strFileName As String
strFileName = Application. GetOpenFilename(filefilter:="Excel Files (*.xls), *.xls", Title:="Please select the excel file to be copied")
It doesn't produce any errors, but it does nothing. Im trying to copy the data in Column A, B & C from row 3 on to the last row (last row with data in A) from one workbook to another (on the workbook the data is being copied to the data should go into the corresponding A, B and C Columns starting with the first row available in A):
[Code]....
I have made this form to basically allow the user to enter data, click the save button and all the data on screen will move to another sheet "Leads Log" and then the data on the form "Insurance form" will be cleared for next time around.
This works fine and will keep adding records onto the second sheet...but ideally i would like to data to be copied and saved to another sheet in another workbook - seperate to this one.
Suggestions on the relevant code would be great. Please find attached my system so far.
I have a Workbook that contains some invoice data from a purchase. I would like to copy this data to a "Master" workbook that'll put everything from that particular workbook on 1 row, and put all the data from another workbook on the next free row and so on.
For example in workbook "Mock" i would like to copy all the cells that have arrows next to them into "Mock 2". Unfortunetly some of the invoices aren't similar in format so i named all the cells that i want to copy (instead of copying cell C3 i'd copy cell "type").
Some of the cells are lists and some of them have conditional formatting with colors. I tried copying the data using Range.copy but it also copied the color of the cell which isn't what i want.
And finally is there a way to generate a unique number each time a new invoice is copied in a row, and them copy that back to Mock 1 cell B2.
Im trying to automate a rather laborious job of copying data from one spreadsheet to another. The user will almost certainly have both spreadsheets open so I have made a small userform with two comboboxes and a button. The user selects the two workbooks with the comboboxes and then when the button is pressed the code copies the data across. I can get the comboboxes to populate but my code is failing when the user presses the button. Is it because I need to somehow reference the sheets in the workbooks?
Code:
Private Sub UserForm_Initialize()
Dim wkb As Workbook
With Me.ComboBox1
For Each wkb In Application.Workbooks
.AddItem wkb.Name
[Code]..
Code:
Private Sub CommandButton20_Click()
Dim x As ComboBox1.Value
Dim y As ComboBox2.Value
Sheets(X).Range("C58").Copy Sheets(Y).Range("G118")
End Sub
In workbook 1, I have a column of Part Numbers and Week 1 to Week 5. I would like a loop to go through Week 1 to Week 5 and grab the quantity (numbers) and copy it to Workbook 2 Sheet1. Along with the number, I would like it to also grab the Week # and the part number. My part numbers grow over time, so how would I loop until the last number and skip any blanks.
HTML Code:
<b>Sheet1</b><table border="1" cellspacing="0" cellpadding="0" style="font-family:Calibri,Arial;
font-size:11pt; background-color:#ffffff; padding-left:2pt; padding-right:2pt; ">
<colgroup><col style="font-weight:bold; width:30px; " />
[Code] .......
I have created a macro that copys pivot table from one Workbook to new workbook. Problems I am encountering are print selecting from source workbook are not copied to new workbook.
Dim AmountofColumns As Long, AmountofRows As Long
Dim ColumnCount As Long, RowCount As Long
Dim ThisWorkbookName As String, ActiveWorkbookName As String, ActiveSheetName As String
Public Sub CreateGroups()
Application. ScreenUpdating = False
Sheets("Preferences").Select
ThisWorkbookName = ActiveWorkbook. Name
AmountofColumns = Range("A1").End(xlToRight).Column
For ColumnCount = 2 To AmountofColumns......................
I have an excel file with data in it.I also have designed an user form so that the user can select few options in that to filter the excel file and get a new file. The reason i am doing this is because the people who are going to use this do not have any knowledge of excel. In the sample attached, the tab "Data" has the data in it. The User form should filter this particular sheet and throw out a new file. In the userform, I have mentioned the fields to be filtered.
View 2 Replies View RelatedHow to copy datas or scores from one sheet to another by using Formulas & Functions.
I tried to attached excel file as an example, but it couldn't.
Let me explain briefly: The file contains 11 Sheets, the first 4 Sheets has students Continuous Assessment of various subjects (about 7 subjects) in 4 different classes.
What I want is, the formulas or functions to use on how to copy the total score in all subjects for each student in various classes (Primary 1A, Pri 1B, Pri 1C, Pri 1D) to Sheets (1st Term, 2nd Term, 3rd Term) as class summary.
And thirdly, the total scores, position, grade & average to also appear in the Result Sheets for each student of various classes (Result Sheet 1A, Result Sheet 1B, Result Sheet 1C, Result Sheet 1D).
if ive got loads of data on one workbook and i want to copy it over to another it often come up with to much data or not enought memory error!
so i was thinking is there a line of code i can use and repeat automaticly that will copy each line indivdualy or maybe 10 lines at a time?
so instead of me trying to copy the entire sheet it would copy a small enought anount of lines or each cell so as not to give me the error.
the workbooks are "Exp1" Sheet2, going to "Exp2" Sheet2
the areas i need copied are all lines (starting from line 5 down) in cells from A to Z.
i have tried making a simple macro that just copies all of the available data from a workbook and pastes it in another. I have looked at information available on the internet and combining data from multiple sources I have reached the following code that does not do what I want:
Code:
Option Explicit
Sub GatherData()
Dim wbCSV As Workbook
Dim wsMstr As Worksheet
Dim FileToOpen As String
Dim fPath As String
Dim fCSV As String
[code]....
I have tried a search on the forums but I could not find anything that I could apply with my limited understanding.
I have a mastersheet with all the information and I want to be able to copy it to new sheets.
The four different sheets I want are: Male-Olympic, Male-Sprint, Women-Olympic, Women-Sprint. Is there anyway to go through the sheet, copy the rows, and paste them into their proper sheet.
I want my macro on the IR Tracker sheet to run once workbook is opened. Is this possible?
I have attached the workbook for better understanding.
I've started this thread a few weeks ago but didn't get any answers on how to solve the problem or if it was even possible to solve. I would like to know if is possible to set a reference to a NOT OPENED workbook. All the code I've tried so far didn't get me anywhere:
View 3 Replies View RelatedI am looking for a way to have Excel zoom to 120% whenever any workbook is opened. (My boss has poor eye sight...)
I set up a simple Macro
Code:
Sub Auto_Open()
ActiveWindow.Zoom = 120
End Sub
but I get an error that says "Run-time error '91': Object Variable or With block variable not set.
Is it possible to write code that can identify how a workbook has been opened i.e. has the workbook been opened by another workbook or has it received a double click event on the workbook itself.
If it is possible I would like to place the code in the open event of the workbook that is being opened.