Store Cell Location In Variable
way to store a cell's location to variables.
Something like:
int a, b
Cell(a, b) = ActiveCell
I'm currently working with a fairly large worksheet, and I'm using Cells. Find to look for a specific cell. Then I want to Filter that column, but I can't figure out what column Selection.AutoFilter Field:=? should be.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Store Cell Address In Variable
I would like to record the address of the last set of cells that data was input into to a variable so that a user can choose to delete the last entry. An 'Undo' button really. What I have is a user form that writes different materials to thier respective sheets in the database. (Material1, Material2, etc.) Some materials have a different number of variables (some have a width and some don't, but all have a quantity.) This is the code I have for adding the material to the database (each material has it's own button with material specific code.) Private Sub AddToMaterial1_Click() Set c = Worksheets("Material1").Range("a65536").End(xlUp).Offset(1, 0) Application.ScreenUpdating = False c.Value = Me.Material1Quantity.Value c.Offset(0, 1).Value = Me.Material1Description.Value c.Offset(0, 2).Value = Me.Material1Length.Value Dim lastenty1 lastentry1 = c.Address Dim lastentry2 lastentry2 = c.Offset(0, 1).Address Dim lastentry3 lastentry3 = c.Offset(0, 2).Address Dim lastentry4 lastentry4 = c.Offset(0, 3).Address Dim lastentry5 lastentry5 = vbNullString Dim lastentry6 lastentry6 = vbNullString Application.ScreenUpdating = True End Sub The following code is what I am trying to do for a single button to clear the last entry to the database. Private Sub RemoveLastEntry_Click() Range(lastentry1).ClearContents Range(lastentry2).ClearContents Range(lastentry3).ClearContents '(There is always at least 3 cells to clear) If lastentry4 = nullstring Then Exit Sub Range(lastentry4).ClearContents If lastentry5 = nullstring Then Exit Sub Range(lastentry5).ClearContents If lastentry6 = nullstring Then Exit Sub Range(lastentry6).ClearContents End Sub
View Replies!
View Related
Store The Selected Cell's Address Into A Variable
I have a table in which I have a "patient" column and a "page" column. The macro searches for a patient's number, then looks if this patient has the page "900.--". A patient may have more than one page, which will result in many rows with the same patient number. So far, my macro uses the search function to find a patient number, then compares the cell next to the active cell to see if it contains the page "900.--". If not, then my macro searches for the next patient and so on until the page is found and noted into another workbook or none is found. In order to stop the loop, I am trying to store the address of the first cell found into a variable "rFirstCell" so that it can later on be compared to another variable, "rSecondCell", which represent the active cell. When both are the same, it means all the available search results have been tested and the loop should stop. Sub testing() Dim rRng As Range, rFirstCell As Range, rSecondCell As Range Set rRng = Worksheets("Overview").[a1] Dim sDeath As String sDeath = "death" ActiveSheet.AutoFilterMode = False If LCase(rRng(2, 15).Value) = "x" Then If LCase(rRng(2, 9).Value) = sDeath Then Workbooks("DM Endpoint pages_test.xls").Activate Range("A1").Select...........................
View Replies!
View Related
Interpolation Given A Variable Table Location & Location Of Data Within
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow. simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
View Replies!
View Related
Circular Reference - Value Of That Variable Changes Depending On The Location Of The Cell
Excel 2003 > Attached is a small model of what I am trying to accomplish. Cells B2 and B4 contain the same formula … a formula that calls a simple function. The function has a variable passed to it … and the value of that variable changes depending on the location of the cell. Now, see the function in Module1 … it is called CellCalc. If the variable passed = Jim then value = 3. If the variable passed = Jack then value = 8. That is straightforward. Note also that when Sheet1 is activated, I calculate the cells from left to right and top to bottom … that is important. Here is the challenge. If B2 > 1 then I want to add B2 to B4 and set B2 to 1. I can set B4 properly but I cannot reset B2. You can see my 2 attempts that are commented out. Is there some way of accomplishing this … or am I simply stuck in a circular reference? The alternative to this is to write a function that operates externally on these cells. That will work for sure but then the values of the calculations will overwrite the functions in those cells, thereby taking away the dynamic nature of this application.
View Replies!
View Related
Store VBA Variable For Later Use
I have some code (listed below) that will open 2 groups of files(for testing purposes, I have been using for only 2 file prefixes, but will need for upwards of 10, and more may be added in the future), depending on what files have been opened in the past (it will skip those) and then import the new ones. I am now trying to clean up my code, and having alot of it abled to be maintained be editing a spreadsheet (administator controlled) What I would like to do is something similar to: defvar= cells(1,1) 'where cells(1,1) has all of the info for that file to import Selection.TextToColumns defvar I realize this will probably be a little more complicated than this, and may even be its own sub or funtion. Here is my starting code, and it works fine: ...
View Replies!
View Related
Variable To Store Multiple Values
I need a bit of help with the below macro which I am trying to create. I recorded the below vlookup, which works perfectly. It checks a list on sheet “Map” and returns a value depending on whether the reference is one of the 6 or not. These 6 are likely to change over time so I would prefer to declare them as variables rather than build them directly into the macro
View Replies!
View Related
Store Current Sheet Name As Variable
I have a workbook that is composed of forty (or so) worksheets containing data and a single summary worksheet that has command buttons that take the user to the appropriate data worksheet for their specific project. Each data worksheet is exactly the same in terms of where the header row starts, and the specific headings. On each data worksheet there is a command button that when clicked, builds a pivot table of the data for the current project. I have been able to create VBA code that hides the columns containing the data and then creates the pivot table in the empty (unhidden) columns n the same worksheet. This works fine, but is not a good solution from a useability standpoint. What I have been trying to do is when the command button is clicked I want to capture the name of the current worksheet as a variable in VBA, go to a separate worksheet to build the pivot table, and when the user clicks a ‘Review Data’ command button on the pivot table worksheet they are taken back to their original worksheet containing their data. Is this possible?
View Replies!
View Related
Store Range Values In Variable Array
I have a list of names from cell A1:A10 in sheet "Input." Each of these names has its own corresponding sheet in the workbook. I want to be able to run the same exact VBA code for each sheet. In other words, I am trying to get my name variable to automatically change to the next value on sheet "Input." I'm sure this is pretty simple to do, but I can't seem to find anything that works!
View Replies!
View Related
Prompt To Select File/path And Store As Variable
I am looking for macro that when run, will open a file explorer window and prompt the user to select a folder and file where they have data stored. Then I need it to be stored as a variable and used as a part of a "Workbook.Open Filename" command. The reason for this is that, I have a huge formatting marco stored within a workbook. When a user extracts a report from SAP, I want the workbook to grab the file that is extracted, open it and import all of the data in order to be formatted.
View Replies!
View Related
Insert Row At Variable Location
I had a quick question for something that should be simple but I can't figure it out. I have a column of sorted values, it goes A A A A A B B B B B and I want to insert a row to separate the A's from the B's. But there will be a random number of A's. I can figure out how to count where the A's end. But I can't figure out how to insert a row. Any suggestions? I tried the two below but they don't seem to work. The for section is counting the A's, and it works, it's what comes next that's giving me a headache!
View Replies!
View Related
Create New Folders In Variable Location
I would like to create new empty folders from the list in column B. The number of folders will vary depending on how many entry in column B. I need the folders to be created in an existing folder in the "current directory" called "Shop_Drawings". The following code may be able to be modified. Sub CreateFolders() Dim MyFile As String Dim sDir As String Dim rng As Range Set rng = Sheets("Matdata").Range("B2") While rng.Value <> "" MyFile = rng.Text sDir = "CurDirShop_Drawings" & MyFile ''above is where I am having trouble...don't know the correct syntax'' MkDir sDir Set rng = rng.Offset(1) Wend End Sub I have attached a sample workbook. I have been getting by with code which requires changing the destination in the module whenever making folders in different diectories or drives.
View Replies!
View Related
Store Cell For Later Retrieval
I'm sure this is a very easy question, but I have been having trouble finding the answer on this and other forums. Our macro has a search routine where it looks through a column for particular cell contents. Once those contents are found, we want it to save that cell's location, go do something else, and then return to that location afterwards. How would we go about doing this?
View Replies!
View Related
Store Worksheet Name In Cell & Use In Formula
I am trying to use the Indirect function to use the value in a cell to select a sheet with the same name as the value of said cell. I have looked at several posts and attempted multiple methods. I still get an error. I cannot find a thread describing exactly what I am trying to do, which is: reference a cell value to direct the formula to the correct sheet to then complete an array Sumproduct formula. Since this description barely makes sense to me reading it, I have attached an example. The problem is in cell C7. Basically, I want cell c7 to look at cell c1 and then go to the tab with the matching name as cell c1 and complete the calcuation.
View Replies!
View Related
Store Values Within A Cell To Make Them Selectable?
I do data entry for a webstore and one cell is used to map out the exact product category/subcategory path. I currently have to copy the appropriate path from a long list on one page and then paste it into the cell. I have to do this a hundred times a day. It would be nice if each cell within that column can have these values stored in them so I can just click on the cell and open up a drag down box and select the needed value. Is this possible to do in Excel?
View Replies!
View Related
Store Values Of Cells With Cell Comments
I have a worksheet where some cells contain a comment. I don't know beforehand how many of those cells are present, nor their address. I want to write a macro that stores the values of only the cells that contain a comment into an array (of course the size of the array is not known beforehand). This should be done by scanning through those special cells in a given order (by rows, by columns, whatever).
View Replies!
View Related
Finding The Location Of A Cell
i am trying to find the location of the current cell and use the information to print it to screen. For example, if the cell A1 is selected, i need to get the location A1 and use this value for a vlookup. is there a method that returns the current cell location "A1"?? activecell.address
View Replies!
View Related
Increment Cell Location Up By One Cell For A Column
Increment all cells located in Column H up by one (the one above it) cell Except for the header cell (since its the header)(H1), H2 will always be a blank due to the make up of my database so that will not cause the header to be re-written. Column H is not an entirely filled column and some cells are empty (if this info was needed in optimizing the code), Im seeking the quickest and easiest way of implementing this since the database is very large.
View Replies!
View Related
Move/Cut Cell To Another Location
I would like to how I can move the words "Total List Price" over to column "C" rather than have it displayed in column "A". If someone can please advise me as to what part of the code I must change in order to have these changes take place Private Sub CommandButton1_Click() Selection.SpecialCells(xlCellTypeFormulas, 16).Select Selection.ClearContents Range("A8").Select Selection. Subtotal GroupBy:=1, Function:=xlSum, TotalList:=Array(6, 9), _ Replace:=False, PageBreaks:=False, SummaryBelowData:=True Application.Goto Reference:="models2" ....................
View Replies!
View Related
Save To Specific Location As Cell Name
I've been searching for ages trying to work out how to do this but have so far only managed to confuse myself. i have office 2007 and I have found some code to convert an excel sheet to PDF, however I need it to saveas the contents of cell (e6) and save to a location on our network drives (C:TEMP).
View Replies!
View Related
Formula To Calculate Cell Location
i'm not sure how to describe this. i've never had to do this before. here is what i'm trying to do. and it's not working. =MIN(B2:B(G2-G3)) basically instead of saying =MIN(B2:Bx)....i want the "x" to be variable based upong the G2-G3 condition. can this be done some other way?
View Replies!
View Related
Cell Value Based On Mouse Location
Is there a way to have excel track where my mouse is hovering(say if I have it hovering over cell A4) and have it return the value of A4 in a different cell (e.g B7)? This would occur in real time - that is, as my mouse moved over the spreadsheet, B7 would update in real time. Note I would also accept someone selecting the cell - hovering (no select) would be ideal but selecting is OK.
View Replies!
View Related
Copy Cell Values While Id Value Is Same To New Location Then Repeat For New Id Value
what I need to do is , while an id value is constant copy 2 adjacent cells to a new location on the same row as the first occourance of the id value, then if the id is the same on the next row repeat the copy and add these 2 values to the cells next to the ones previously copied. Once the Id value changes then the copy restarts on a new row which is the same as the first occourance as the new id value and repeats the same sequence as described in the first statement. I have attached a sample spreadsheet showing an example of the source and how I would like it to end up, the colour is only there to seperate the outcome from the source and is not required in the code.
View Replies!
View Related
Find MIN Location, Show Cell Next To It
I imagine this is pretty simple but for the life of me I can't figure it out. Here's what I want to do... Find MIN in Column F After finding the MIN in F (let's pretend F222 is the current min) Show the text in the field next to it (in this case display text from E222)
View Replies!
View Related
Creating Variables Based On Cell Location
if Row i Column j is activated then a corresponding variable Aij, Bij, Cij or Dij would be created (if not already existing), or cumulated by 1. The problem as I see it - completely generalised - is to create a variable where the variable name itself is formulaic, as well as its value. I know SAS would have no problem with this due to the order in which it parses data steps, but I'm pretty amateur with other programming languages so I don't know if this is blindingly obvious or downright impossible!
View Replies!
View Related
Add Position Shape To Cell Location
i need to loop through a column of values and get each value Dim LastRow2 As Long Windows("SCFOutput.xlsm").Activate Sheets("Q2SCNeg").Select Columns("A:B").Select ActiveSheet. Range("A65536").End(xlUp).Offset(1, 0).Select LastRow2 = ActiveCell.Row - 1 For Each c In Worksheets("Q2SCNeg").Range("A2:A" & LastRow2).Cells MsgBox ActiveCell.Value Next c i did this but it selects the first blank row (row 15) and gives me an empty message box 14 times (which is right, but i need 14 values) the reason i need the loop is because the number ov values will always change
View Replies!
View Related
Return Active Cell's Location/row
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here! ... Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that? The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
View Replies!
View Related
Search Multiple Columns To Provide Cell Location
I have text (eg. 1-* or 10-* or 11-*) being entered in the following columns Q21:Q128 R21:R128 V21:V128 W21:W128 AA21:AA128 AB21:AB128 AF21:AF128 AG21:AG128 AK21:AK128 AL21:AL128 AP21:AP128 AQ21:AQ128 AU21:AU128 AV21:AV128 AZ21:AZ128 BA21:BA128 BE21:BE128 BF21:BF128 BJ21:BJ128 BK21:BK128 I would like Excel to search the above columns provide the cell location (eg. 1-10-*) is located in cell BF26
View Replies!
View Related
Select A Range Based On Active Cell Location?
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result. For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z). The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
View Replies!
View Related
Browse For Picture File And Put Location In Cell
I am trying to code where when someone hits the command button it will popup with the browse form and they find the location of the file and it puts there choice in a cell. don't know if it matters but the location would always be a picture. Here is what I have but it shows -1 in the cell HTML Dim strFilePath As Variant strFilePath = Application.FileDialog(msoFileDialogFolderPicker).Show shUserInformation.Range("D12").Value = strFilePath
View Replies!
View Related
Current Cell Location In A Cell
I need a function(s) that can indicate the current cell column and row in two different cells. e.g. Let's say in Cell A1 should indicate the column of current selected cell and B1 indicates the row of current selected cell. A1 would read - 7 and B1 would read X if the current cell is at X7. I do not know VBA. If you give VBA solution, please give me link on how to activate the codes.
View Replies!
View Related
Reference Cell Based On Button Location & Determine Button Used
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA. Sub Process_CheckBox() Dim cBox As CheckBox Dim LRow As Integer Dim LRange As String LName = Application.Caller Set cBox = ActiveSheet.CheckBoxes(LName) ' Find row that checkbox resides in LRow = cBox.TopLeftCell.Row LRange = "B" & CStr(LRow) 'Change date in column B, if checkbox is checked If cBox.Value > 0 Then ActiveSheet.Range(LRange).Value = Date 'Clear date in column B, if checkbox is unchecked Else ActiveSheet.Range(LRange).Value = Null End If End Sub Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
View Replies!
View Related
Store Data Daily
I have a two rows of data one containing names and the other containing corresponding numbers. The names are static and the numbers change on a daily basis. I want to be able to copy the numbers to a static table next to each name on a daily basis (so I can see what the value was a few weeks ago). Is there anything I can write to do this job? My thinking was to set a vlookup to grab the data but i'm not sure how this would work because the vlookup would change daily when the numbers change
View Replies!
View Related
Store Macro For Use In Any Workbook
I have tried to look for this in several websites and have not found the appropiate answers. So i figured one of the Wizards in this board can help me. Right now when I built a macro it has to be dependent to a file. However I like to build a macro button that when I use it, it will actually just work for any given currently open sheet.
View Replies!
View Related
Function To Mirroring Cell Relative To Function's Location
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place. Is someone aware of a function which will target a relative location instead of an exact cell?
View Replies!
View Related
Forecasting Multiple Store Openings
I have a base model for site openings and opening schedule. I need to build a 5 yr model which reflects the base model for each opening. I have matched the month in the model to the opening month but how do I get the base model subsequent months to follow the opening month?
View Replies!
View Related
Loop To Store Data From A Range
I am trying to do is use a loop to store data from a range into a 3 or 4 dimensional Array and then output the data from the Array in another range. so for example the i want loop through the data in this range and store all data that is in account 701 into an array and then output this information in another range (tab). The data would have several different account but I only want to see one at a time. Account Price Amount 701 150 1,000,000 701 125 250,000,000 701 3.25 6,000,000 702 4.25 25,000,000 702 2.35 3,600,000 702 2.55 10,000,000
View Replies!
View Related
Store Line Of Text Into An Array
i am not good in programming.In an outlook i am trying to write a maro. I am reading lines from a text using readLine(), how i can store each line into an array using vbscript. I write the code as follows, While Not F.AtEndOfStream s = F.readline Start = InStr(s, "@") If (Start > 0) Then - Here i need an array, when start>0 , store that line into an array
View Replies!
View Related
|
TRACKER
