I need a bit of help with the below macro which I am trying to create. I recorded the below vlookup, which works perfectly. It checks a list on sheet “Map” and returns a value depending on whether the reference is one of the 6 or not. These 6 are likely to change over time so I would prefer to declare them as variables rather than build them directly into the macro
View 4 Replies
I have a list of names from cell A1:A10 in sheet "Input." Each of these names has its own corresponding sheet in the workbook. I want to be able to run the same exact VBA code for each sheet. In other words, I am trying to get my name variable to automatically change to the next value on sheet "Input." I'm sure this is pretty simple to do, but I can't seem to find anything that works!
View 5 Replies View RelatedHow to store a value in variable after concatenation of two values and putting it into the same cell.
Let assume, in cell A1, we have value 1 (numeric). And in code i have a variable with stored value as "%".
Now i want to concatenate 1 and % and put it back into cell A1 as 1%.
I have a written a code, but seems to be wrong one.
Sub Percentage()
Per = "%"
lr = Sheets("Process Overview").Cells(Rows.Count, 3).End(xlUp).Row
For i = 10 To Sheets("Process Overview").Cells(Rows.Count, 3).End(xlUp).Row
If Cells(i, 4).Value = "p" Then
[Code] ........
I have some code (listed below) that will open 2 groups of files(for testing purposes, I have been using for only 2 file prefixes, but will need for upwards of 10, and more may be added in the future), depending on what files have been opened in the past (it will skip those) and then import the new ones.
I am now trying to clean up my code, and having alot of it abled to be maintained be editing a spreadsheet (administator controlled)
What I would like to do is something similar to:
defvar= cells(1,1) 'where cells(1,1) has all of the info for that file to import
Selection.TextToColumns defvar
I realize this will probably be a little more complicated than this, and may even be its own sub or funtion.
Here is my starting code, and it works fine: ...
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I have several words in sheet2.one word per line. every line in sheet1 should be checked and deleted if the line (colum 3 and 4) contains any of the words in sheet2. i decided to go with two for-loops, my Problem is a error in line 7 and 9 (indicated by arrows). it seems to me that ...Cells(...).Value is not allowed for strings. i already tried .Text, checked several VBA Forums but could not find a solution.
View 13 Replies View RelatedIs it possible to store format of a sheet in a variable?
I have one sheet. i want to select all cell. then copy the formatting of this sheet(template) in a variable. is that possible? does variable need to be a clipboard? if it is in clipboard how to reference it? i.e if i have two or three formats stored in a clipboard how to select and paste the second one?
once i store this in a variable, i will paste in new sheets(about 50 of them) so that all these new sheets have same format as the template.
what is the easiest to do that?
If I have a file open called test file, How I can find the file path of the file that is open and how can I store that's as a variable?
What I am doing is trying to open a file that excel closes in a save as process!
I have a workbook that is composed of forty (or so) worksheets containing data and a single summary worksheet that has command buttons that take the user to the appropriate data worksheet for their specific project. Each data worksheet is exactly the same in terms of where the header row starts, and the specific headings.
On each data worksheet there is a command button that when clicked, builds a pivot table of the data for the current project. I have been able to create VBA code that hides the columns containing the data and then creates the pivot table in the empty (unhidden) columns n the same worksheet. This works fine, but is not a good solution from a useability standpoint.
What I have been trying to do is when the command button is clicked I want to capture the name of the current worksheet as a variable in VBA, go to a separate worksheet to build the pivot table, and when the user clicks a ‘Review Data’ command button on the pivot table worksheet they are taken back to their original worksheet containing their data. Is this possible?
way to store a cell's location to variables.
Something like:
int a, b
Cell(a, b) = ActiveCell
I'm currently working with a fairly large worksheet, and I'm using Cells. Find to look for a specific cell. Then I want to Filter that column, but I can't figure out what column Selection.AutoFilter Field:=? should be.
I would like to record the address of the last set of cells that data was input into to a variable so that a user can choose to delete the last entry. An 'Undo' button really.
What I have is a user form that writes different materials to thier respective sheets in the database. (Material1, Material2, etc.) Some materials have a different number of variables (some have a width and some don't, but all have a quantity.)
This is the code I have for adding the material to the database (each material has it's own button with material specific code.)
Private Sub AddToMaterial1_Click()
Set c = Worksheets("Material1").Range("a65536").End(xlUp).Offset(1, 0)
Application.ScreenUpdating = False
c.Value = Me.Material1Quantity.Value
c.Offset(0, 1).Value = Me.Material1Description.Value
c.Offset(0, 2).Value = Me.Material1Length.Value
Dim lastenty1
lastentry1 = c.Address
Dim lastentry2
lastentry2 = c.Offset(0, 1).Address
Dim lastentry3
lastentry3 = c.Offset(0, 2).Address
Dim lastentry4
lastentry4 = c.Offset(0, 3).Address
Dim lastentry5
lastentry5 = vbNullString
Dim lastentry6
lastentry6 = vbNullString
Application.ScreenUpdating = True
End Sub
The following code is what I am trying to do for a single button to clear the last entry to the database.
Private Sub RemoveLastEntry_Click()
Range(lastentry1).ClearContents
Range(lastentry2).ClearContents
Range(lastentry3).ClearContents '(There is always at least 3 cells to clear)
If lastentry4 = nullstring Then Exit Sub
Range(lastentry4).ClearContents
If lastentry5 = nullstring Then Exit Sub
Range(lastentry5).ClearContents
If lastentry6 = nullstring Then Exit Sub
Range(lastentry6).ClearContents
End Sub
I am having trouble using the find function. I need to store a date as a variable and then find this date on another worksheet. The date is in the following format:
dd-mmm-yy
This is what I currently have which gives me a run time error 91:
Code:
Dim DateSearch As Date
DateSearch = Range("C3").Value
Cells.Find(What:=DateSearch, After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
I have a table in which I have a "patient" column and a "page" column. The macro searches for a patient's number, then looks if this patient has the page "900.--". A patient may have more than one page, which will result in many rows with the same patient number. So far, my macro uses the search function to find a patient number, then compares the cell next to the active cell to see if it contains the page "900.--". If not, then my macro searches for the next patient and so on until the page is found and noted into another workbook or none is found.
In order to stop the loop, I am trying to store the address of the first cell found into a variable "rFirstCell" so that it can later on be compared to another variable, "rSecondCell", which represent the active cell. When both are the same, it means all the available search results have been tested and the loop should stop.
Sub testing()
Dim rRng As Range, rFirstCell As Range, rSecondCell As Range
Set rRng = Worksheets("Overview").[a1]
Dim sDeath As String
sDeath = "death"
ActiveSheet.AutoFilterMode = False
If LCase(rRng(2, 15).Value) = "x" Then
If LCase(rRng(2, 9).Value) = sDeath Then
Workbooks("DM Endpoint pages_test.xls").Activate
Range("A1").Select...........................
I am looking for macro that when run, will open a file explorer window and prompt the user to select a folder and file where they have data stored. Then I need it to be stored as a variable and used as a part of a "Workbook.Open Filename" command.
The reason for this is that, I have a huge formatting marco stored within a workbook. When a user extracts a report from SAP, I want the workbook to grab the file that is extracted, open it and import all of the data in order to be formatted.
I have a spreadsheet with near 300 tabs, each with a picture in the tab. The main tab has a list of all other tabs, the goal is to allow the user to click on a cell next to an entry, and have Excel flash the referenced tab to allow the user to see what the entry is referencing. I have written a simple macro that activates a desired tab, unhides it, displays a message box to pause the macro, rehides the tab, then returns the user to the main tab.
Rather than creating a macro for all 300 tabs and creating buttons I would love to use the Private Sub Worksheet_SelectionChange(ByBal Target As Range) or some variation thereof, to make my life much easier. The name of the tab is in cell A2, so I would want to have the user click on cell A1, activate the macro, then take A1 to A2 with something like A1 = A(x+1)->A2, then display the tab listed in A2. So rather than have 300 macros with Sheets("XYZ").Visible = True, I would love it to read Sheets(contents of referenced cell).Visible = True. with the contents of referenced cell coming from some manipulation of the cell I clicked on...
I need to store a known index, unknown value in a variable so I can increase the value and use it in a database. It is used as a version number for a part and the versions go like: "00" -> "AA" -> "AB" -> .... -> "AZ" -> "BA"... etc.
VB:
If tool.Worksheets("TRB Database").Cells(A, "R").Value <>
ThisWorkbook.Worksheets("Design Calculator, Q").Cells(7, "C").Value Or
tool.Worksheets("TRB Database").Cells(A, "AA").Value <>
ThisWorkbook.Worksheets("Design Calculator, Q").Cells(5, "K").Value Or tool.Worksheets("TRB Database")
[Code] ....
That is a part of the increase and when I try to increase "AA" by 1 it goes to "B" and not "AB".
VB: tool.Worksheets("TRB Database").Cells(row1, "D").Value = Chr(Asc(tool.Worksheets("TRB Database").Cells(A, "D").Value) + 1)
This is where I increase the value.
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")
[Code].....
Need exact VBA code syntax to assign a workbook (to be closed) sheet's cells J4 to J72 values to a variable called "ColJValues" to be assigned to another sheet (to be opened later in the macro). The values are all dates. Once the other workbook is opened later in the macro, need the exact syntax to assign the value in the above variable, "ColJValues", to it's cells J4 to J72.
View 8 Replies View RelatedI'm trying to find the sum of a range of values based on multiple criteria, and the criteria is that the fields all have to be identical, then sum them. I've attached a brief example spreadsheet that has the fields
A=City
B=State
C=Values
What I want the formula to do is first find the range of all the matching states, then find the range of all the matching Cities within the states, and then sum the values based on them having matching city values.
I've been able to do that with one criteria using SumIf, I'm not sure if this will help paint an image of what I want to do:
=ROUND(SUMIF($B$3:$B$11,$B$3:$B$11,$C$3:$C$11),0)
But I can't figure out the way to do multiple criteria against itself. Most of the results I get from Google using multiple criteria are using a set few values, and I can't seem to figure out how to alter those methods to work with my situation.
how to set a cells value into a variable, using .value, then set another cells value equal to that variable without using copy/paste
What I can't figure out is how to see the value of multiple cells to a variable and place them into another range of the same size using .value. It would be nice to free up the clipboard.
I do data entry for a webstore and one cell is used to map out the exact product category/subcategory path. I currently have to copy the appropriate path from a long list on one page and then paste it into the cell. I have to do this a hundred times a day. It would be nice if each cell within that column can have these values stored in them so I can just click on the cell and open up a drag down box and select the needed value. Is this possible to do in Excel?
View 2 Replies View RelatedIn an excel i have 3 columns they it contains around 12000 records
Group FA Title
A S1 bbbb
A M1 xxxx
A M2 eeeee
A S1 ffffff
A S1 pppp
A M3 aaaaa
A M2 ooooo
A M2 qqqq
A M1 ttttt
Here i need to get the unique FA, so i filter the column FA, my question is, After filter with FA column ,is there any way to store these unique FA(ie S1,M1,M2,M3) into an array using vba?
I am useing Excel 2003 and OPC server client for excel, and i am monitoring 6 values, that are changeing each second. I was trying to make a function to collect this information, so i could form a statistic table, but unfortunally with no success.
I can watch how the values are changeing their numbers, but i cant sotre the values in the rows below. Does anyone know how can i do this
I have a worksheet where some cells contain a comment. I don't know beforehand how many of those cells are present, nor their address. I want to write a macro that stores the values of only the cells that contain a comment into an array (of course the size of the array is not known beforehand). This should be done by scanning through those special cells in a given order (by rows, by columns, whatever).
View 4 Replies View RelatedI have a base model for site openings and opening schedule. I need to build a 5 yr model which reflects the base model for each opening. I have matched the month in the model to the opening month but how do I get the base model subsequent months to follow the opening month?
View 10 Replies View Relatedhow can i store the values of an autofilter's list in a array using VBA.
View 4 Replies View RelatedI am trying to do some calculations as shown in the file. The MAcro has to show the formulas and then calculate the value, the problem is that the formulas change all the time and depends of Column A. Column A defines de Values that we will use so they will change as well. I have fould the way to copy one formula and make it usefull in the cell next to it but the problem are the cells that I named before. All my values change in each Loop and finish with the values of the last loop. I would like to save each value that corresponds to the variable (column A) and his formula, to then calculate.
View 4 Replies View RelatedI'm creating an addin that will go on a shared server and be used by a number of different users. How do I go about being able to store user settings in a sheet on the addin if multiple users have different settings? Do I need to somehow make the addin read only?
View 7 Replies View Relatedi have a list of variables with the suffix number incrementing
type1
type2
type3 ... etc to 100
and i want to run a function for each type instead of having repetitive code for each of them how can I concatenate the integer i with the string "type" and have it as a variable name?
Private Sub CommandButton1_Click()
Dim type1 As Boolean
Dim type2 As Boolean
Dim type3 As Boolean
Dim type4 As Boolean
Dim type5 As Boolean
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
