How I can subtract a year when I formulate based on if the current month is January.
Such as Current month = January 2014, I would require the cell to populate December 2013, any other month would return the current year value.
I have currently tried { =DATE(YEAR(A3)-1,MONTH(A3),DAY(A3)) } whereas cell A3 uses NOW() function formatted to MMMM, but it changes for every month.
I have a problem calculating something that happened last month if the month is january. At the moment, if the month is not January it works:
View 3 Replies View RelatedI have about 80,000 dates. What I need to do is to place an x by the date if it falls inbetween January. For example, I have start Date in A1 and End date in B1. If the start date was 10/20/2013 and the end date was 6/11/2014 then that woub give me an "x" because it went through January. If the start date was 11/23/2013 and the end date was 1/1/2014 that would give me an "x" because it fell in January but if I had 8/4/2013 as a start date and 12/29/2013 then that would be blank. Hope that I made myself clear enough.
View 2 Replies View RelatedI want to calculate Year To Data in B1 based on some data in C1 to N1. The monthnumber is located in cell A1.
There is of course several ways to do this, but is there a simple and easy formula one can use.
formula off here i use all the time relating to finding and sumproducts for specific months and years i.e.
Jan 2008, Dec 2007.. depending on these dates excel searched through a specified range and returned me any values i wanted like No. of occurences, totals, sums etc etc it was a sumproduct formula...
is there any way i could specifiy a date i.e. Jan 2009, which would search column a and return the date /and/or an account number in column b, only if the date was during jan 2009?
The reason i want this is to use a lookup on the account numbers to return specific items of info, but i only need the account numbers if they occurred in specific months which i want to choose.
I have my ms access and ms excel which is connected each other .
=> now in my ms access have a table name (tblMonth) has columns (year,MonthNum,StartDate,EndDate)
HERE: sample in january(1) and feb(2)
YearMonthNum StartDate EndDate
2014 130/12/201305/01/2014
2014 106/01/201412/01/2014
2014 1 13/01/201419/01/2014
2014 120/01/201426/01/2014
2014 127/01/201402/02/2014
2014 203/02/201409/02/2014
2014 2 10/02/2014 16/02/2014
2014 217/02/201423/02/2014
2014 224/02/201402/03/2014
=> and for my ms excel has its columns (year,month,date) in this if i input the date that is base in the database range from StartDate TO its EndDate will automatically put the month and year which base also in my database (year,MonthNum)
HERE:
A1 B1 C1
Year Month Date
A2=2014 B2=January C2=01/01/2014
1. I would like to be able to select a month from a drop down ( cell C4), and for Column B ('Cumulative Performance') to reflect the sum for each name between Jan and the month selected.
2. In Column D I would like to rank the relative position of the sum total; such that if I selected 'Dec', John would display '13' in D7, Anne '3' etc.
3. In Column E I would like to show by way of a coloured arrow (or even a smilie icon) the relative change in ranking of the sum totals evaluated for my chosen month with those calculated up until the previous month (e.g. for Anne, if I select June, the Jan to June total is 36 (rank 2 in the June total's), the May to Jan total for Anne is 32 (rank 1), therefore her relative rank movement between the June and May cumulatives moves down and cell E8 would show a red-down arrow (amber horizontal for no change and green up-arrow for an improvement in rank).
If I have a date format 7/1/13 that shows as Jul 13, how can I subtract 1 year from this in the next cell?
View 3 Replies View RelatedI am looking for a way to count the number of Days after Christmas each year.
For example today is the 1st October hence it is easy to work out the number of days since last Christmas as being =Today()-25/12/2006
How do I have a reoccuring formula that is Today-Christmas each year without having to enter the year of last Christmas so that for example as at 26/12/2007 the answer will be 1 and so it will also be on the 26/12/2008?
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies View RelatedSerial No Search E220060926320061125420060612520070824620061026720061226820061127920061226 Excel tables to the web >> Excel Jeanie HTML 4
E - Year Month Date
I need F column as Month Date Year Format
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx‎
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View Relatedin the attachment I have problems in Cell B4, A9, and B9:
1. Cell B4: if Cell C2 is 25-May-07, then Cell B4 must be 26-Apr-07, if Cell C2 is 25-Apr-07, then Cell B4 must be 26-Mar-07, I did, but it is not working well, mean the format is not applied on that (Cell B4)
2. Cell A9: if Cell B4 is 26-Apr-07, then Cell A9 must contain the day of Cell B4 format (d), like 26...
3. Cell B9: the same as Cell A9, but format must be (ddd)
=Date(year(today()),month(today()),A1) works great, However I need the formula to subtract 1 month if the value returned would be greater than today's date.
View 2 Replies View RelatedIn attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
View 2 Replies View RelatedI'm graphing data from November 1994 to present. Since it's such a long time period, I only want to indicate a given year once (1994, 1995, 1996, etc.) with a tick mark every quarter (e.g. 1994 | | | 1995 | | | , etc).
I'm having difficulty doing so since the graph starts in November. The graph right now shows 1994 as a full year and thus the data doesn't correspond with the correct dates.
I have a sheet where the columns have the month end date for each date, ex January 31,2014 February 28, 2014, March 31, 2014 etc. These dates are used in another formula to compare to the current date and if the current date is past the result is different from when if the date is in the future.
I would like a formula that would update the Month end date when we enter a new year. So for example once we get to January 1 2015 my date would change to January 31,2015, February 28, 2015, March 31, 2015. this would note be dependent on the system date but on the date in another cell.
I have a table with columns 'Date', 'Account', 'Sales'.
I need a formula that will give me the given sales for a certain month, for a certain account.
Ive tried various SUMIFS '=SUMIF(Table1[Billing Month],(MONTH(A191)&YEAR(A191) = MONTH(Table1[Billing Month])&YEAR(Table1[Billing Month])),Table1[Net Invoice Value])'
Ive looked at Arrays =SUM(IF(MONTH($A$2:$A$6)=1,$B$2:$B$6,0))
I am trying to use a pivot table to analyse some data. The base contains a "day" date..ie 01/05/08, however I want the pivot table to summarise by the month..ie May 08. I have used the "=month(cellref) command, and it returns the correct month number. However when I try and format this to "mmm" or "mmm yr" to get a month I can then cut and paste, it always retunrs the month of JAN.
View 3 Replies View Relatedi have a column in a spreadsheet that stores a date and another column that i want to store a date category. I want the "date category" column to return the date from the "date" column as: eg Jan 09 (if the date is eg 24/01/09)
View 2 Replies View RelatedIm having a little issue with the way the dates are layed out.
I have a condition format =AND(RC5="No",TODAY()<RC4+10)
And withen the cell's the date is located, If the cell is writen Month/Day/Year everythink works.
Though i have always written dates like Day/Month/Year.
ive tryed to do go to the number format thing and change it, though that just seams to change the end display not the way excel handles the date. it there a system level change that can be made of change somethink.
I'm getting people to set up the dates as mmm-yy which makes it so much easier to run a macro with dates. However I still need to search on d/mm/yy (e.g. 1/04/2012 for April). Is there a way of allowing the input box to have April 2012 match 1/04/2012?
I've currently got a message in the Input Box specifying that people need to type in the specific first day of the relevant month.
I have a list of dates that has been entered as dd/mm/yy. I need to extract the month in one column and year in another column from that date.
I tried using =Month(a1) and Year(a1) but it returns as #value.
I have data which I import from CSV files from a JDE application on a monthly basis, using "JobCostData" macro ( have not posted code here as it is contained in the attached file).
For each month I import the data my macro creates a seperate spreadsheet and names the spreadsheet as the "mmm-yy" the data relates to, and then takes the information from each sheet and collates this on to on spreadsheet named " Pivot Data".
I then run a second macro "MacroXX", ( again have not posted code here as it is contained in the attached file), this macro looks at the data on "Pivot Data" and creates a unique list of Work Order Numbers and Descriptions and copies them to the spreadsheet named "Report".
Now what I would like to do (and can't get my head around):
Once the "Report" has been populated I would like to come up with a series of total "Cost $" for each Work Order by:
1. Month, for the past 6 months based on a Calendar Month End date (Note: For now I have hard coded the dates, but I will add code at a later stage to prompt user to select a date which will then write this to cell H4 on the "Report" spreadsheet and have the other dates derived from this date.)
2. Year to Date (YTD) based on the Financial year the Calendar Month End Date falls
3. Inception to Date (ITD) based on the
Note:
1. I have tried using Pivot Tables but this will not give me ITD totals.
2. I would prefer to use a macro rather than formulas.
3. I have populated the "Report" spreadsheet with the expect result based on the current data.
I would like to see the Year To Date sum month by month in cell B8 when rolling down the cell B6. See in attached file.
View 9 Replies View RelatedI only want to include the Month of January in a sumproduct function on another page using a name manager array.
I was thinking of using
=SUMPRODUCT(INDEX(DATA,0,17),--((MONTH(INDEX(DATA,0,5)=1)*INDEX(DATA,0,17))
Where the dates are in the 6th column and include blank cells at the bottom and in the first row it says Date.
I have a spread sheet for 12 months. I am wondering if there is a way to format to show in the cell only day of the month.
View 4 Replies View RelatedI am creating a worbook to generate month end reports. I'd like to pull figures from the various budget sheets into the reporting sheets for the current month and year to date by setting up a variables sheet and I think the "Choose" function but my experimentations have proven me incapable of doing so.
What I'd like to do is set my month in the variables sheet to the month I want to report in, eg "Feb" and have the budgets pull through automatically.