Change Year But Keep Month The Same Based On Current Year
Mar 8, 2014
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx‎
View 4 Replies
ADVERTISEMENT
Sep 25, 2006
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then
MsgBox ("You may not enter Data before the current Month")
Else '...... Run main code here
View 3 Replies
View Related
May 14, 2009
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies
View Related
Jan 22, 2010
I have a worksheet called "zz_Exchange" that contains the exchange rate for my company for each month of the financial year. I am using this info in a summary page that uses the data for multiple calculations in the workbook.As we pass each month I would like to move the focus of a cell in the summary sheet to the relevant month in "zz_Exchange"
The column names are "currency_code" (USA Euro etc),
"currency_year" (09, 10)
"period" (1-12)
"exchange_rate" (this is where the data is held)
View 4 Replies
View Related
Dec 17, 2009
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
View 2 Replies
View Related
Mar 6, 2014
I am a memeber of this forum for more than a year, and currently assign into a new assignment which dealing an excel file everyday. We have one excel file for moniroting of action items generated by the management after the study. As since there were around 2,500+ rows has been generated since in the beginning of 1990's till todate. So I was thinking of instead of getting the result through filter manually, I want to create a formula that will count of how many has been closed this month out of the total numbers of action items.
Is it possible to use the COUNTIF formula to count the number of items in Col C, where Col B contains a date?
2-Jan-13 Closed
2-Jan-13 Closed
5-Jan-13 Closed
19-Feb-13 Closed
16-Feb-13 Closed
22-Feb-13 Closed
2-Mar-14 Closed
5-Mar-14 Closed
8-Mar-14 Closed
10-Mar-14 Closed
15-Mar-14 Closed
View 10 Replies
View Related
Dec 8, 2013
Looking for a formula to compare current year values to previous year values. For example, if the current year has values for the month of January through March (100, 100 and 150), current year value will be 350 and the previous year value will be 975 (i.e. 300+275+400). The aim here is to make the previous year months summation equal to the present (or current) values. As new values are entered for the current year, the previous year's values will have to change to reflect the new month's value entered for the current year.
Month 2012 2013
Jan 300 100
Feb 275 100
Mar 400 150
April 650
May 454
June 800
July 500
Aug 375
Sep 525
Oct. 300
Nov 410
Dec 510
Sample file is attached : Comparison_Years.2011.xls‎
View 4 Replies
View Related
Dec 3, 2008
I'm calculating sick days on an Attendance Report.
- Sick days accumulate at a rate of 1.25 per month.
- Employees will carry-forward unused sick days from 2008.
- The maximum sick days is 30.
In trying to create a formula that will multiple the current month (eg Dec=12) by 1.25, subtract any sick days taken YTD (S16), and add the carry-forward days from 2008 (W16), I noticed one problem with the following formula:
View 2 Replies
View Related
Mar 23, 2009
finding a code that would automatically insert various phrases into a column depending on whether or not the person in that row was due to renew their membership in our organization. The code I received works fantastically, but I've come across one snafu:
View 3 Replies
View Related
May 3, 2008
I am trying to get mmm-yy date format for the next 2 consecutive months from now. I used the following code for that reason, but I am not getting.
strDate = Format(DateAdd("m", 1, Date), "mmm-yy")
strDate = Format(DateAdd("m", 2, Date), "mmm-yy")
However if I use this, I get the current months date correctly (like May - 08)
strDate = Format(DateAdd("m", 0, Date), "mmm-yy")
View 9 Replies
View Related
Dec 13, 2011
I am trying to do an IF statement, if the activecell's value is equal to this current year, do nothing and if its not the current year, to offset one column to the right and insert a blank column, then copy the whole column to the left and replace it with the new blank column.
View 1 Replies
View Related
Feb 27, 2009
DATE function won't return TODAY()'s year in the "year" slot.
Is there a way convert, for example, 2/8/1963 to 2/8/2009 without using Concatenate?
View 9 Replies
View Related
May 9, 2014
I use this formula to count number of entries month wise.
Following example is for Month of Feb.
How can I convert this to count entries for current year ( of course month wise).
View 9 Replies
View Related
Feb 29, 2012
I've got a formula that has numerous nested IF statement and am trying to get the true result to be the first of a given month of the current year. Here's my formula:
Code:
=IF(Setup!$B$3="X","1/1",IF(Setup!$C$3="X","2/1",IF(Setup!$D$3="X","3/1",IF(Setup!$E$3="X","4/1",
IF(Setup!$F$3="X","5/1",IF(Setup!$G$3="X","6/1",IF(Setup!$H$3="X","7/1",IF(Setup!$I$3="X","8/1",
IF(Setup!$J$3="X","9/1",IF(Setup!$K$3="X","10/1",IF(Setup!$L$3="X","11/1",IF(Setup!$M$3="X","12/1",""))))))))))))
Everything works, save that the cell becomes 1/1 with no year at all. I've messed around a bit with TEXT and various DATE/MONTH/YEAR functions on this one, but can't seem to get it correct.
View 6 Replies
View Related
Nov 21, 2007
I have a workbook with two spreadsheets in it. On the second sheet there is a large table, which column headings are months and years (e.g. Jun-07 Jul-07, Aug-07, Sep-07....). I was trying to write an excel vba code that would search the first row (column headings) to find the current month and year, and copy the corresponding column along with two previous columns (months) to the first sheet. I would like to have a code that will be able to do this in Jan-08, Feb-08, or Jan-09 as well.
View 2 Replies
View Related
Feb 21, 2014
I have a file which I use for planning purposes, sometimes two or three years ahead of time. I have a "Reference_Year" cell, B1, which controls most of the dates in the spreadsheet.
I have a code which is intended to change the current year of Excel so if I have 2016 as the "Reference_Year" and I enter "05/05" somewhere in the range D5:D50, the date will appear as 05/05/2016. I feel like I am not too far but at the moment the date I get is 05/05/2000. Ideally I would like it to work with a Reference_Year entered in the format 01/01/2016 (which is used for the rest of the spreadsheet).
[Code] .....
View 9 Replies
View Related
Apr 3, 2014
In sub which will convert file to PDF and save it to assigned folder and then attach it to email in outlook. All works fine.
However is is possible to modify the code to save fole to respective month folder ( as per current date and year)?
e.g. I have created folder Named 'Trial' in C drive . This has sub folders 2014, 2015, 2016, 2017, 2018 Each year folder will have sub-sub folders month wise like This has sub folders as Jan , Feb , Mar , Apr .... till Dec Now e.g. if date when the pdf was created is 23/4/14 then it is saved in C:Trials2014Apr automatically. Currently every year I keep creating new folders etc... bit primitive though.
View 2 Replies
View Related
Feb 9, 2009
I imported a large amount of data from another program. The data is in one column and is in date format (02/24/57), for example. The data is made up of my clients birthdays. I want to import those birthdays into my outlook to create reminders but the dates are years past. I need to change the birth year to the current year in order for the reminder to activate going forward. If I dont update the year, the dates import back to the date they were born. In some cases 60 years back.
I am hoping that I dont have to manually change each date before I attempt to import into outlook.
View 5 Replies
View Related
Jul 19, 2006
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
View 2 Replies
View Related
Aug 20, 2013
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
View 4 Replies
View Related
Mar 27, 2014
I have a sheet with the following values:
280315 085B 10:24 2R
The '085' is the 85th day of the year. I would like a formula that reads that part of the data, and return the month that day is in, in the "jan", "feb", "mar", etc. format.
View 14 Replies
View Related
Sep 5, 2007
I would like to calculate the sum of investments based on their expiry date and have the totals per month (and year). I have a table that looks like:
TermInterest rateMaturityBalance
24 Months7.12%11 November 200740,000.00
12 Months7.74%13 November 200750,000.00
24 Months7.05%10 January 200853,889.12
12 Months7.85%11 January 2008120,000.00
12 Months8.02%22 March 200817,000.00
36 Months6.68%30 June 200832,000.00
I'd like to have something like:
Nov 07 90,000.00
Dec 07 0.00
Jan 08 173889.12
and so on...
Admittedly I am an Excel novice, so excuse me if my question is dumb and has a simple answer (actually I hope it has :-) but I have tried to find a solution by searching forums, my books, online help, I tried my luck with sumif and SUMPRODUCT functions, even used the conditional sum wizard, but I can't get it right
View 4 Replies
View Related
Dec 6, 2009
I want to calculate Year To Data in B1 based on some data in C1 to N1. The monthnumber is located in cell A1.
There is of course several ways to do this, but is there a simple and easy formula one can use.
View 3 Replies
View Related
Jan 21, 2009
formula off here i use all the time relating to finding and sumproducts for specific months and years i.e.
Jan 2008, Dec 2007.. depending on these dates excel searched through a specified range and returned me any values i wanted like No. of occurences, totals, sums etc etc it was a sumproduct formula...
is there any way i could specifiy a date i.e. Jan 2009, which would search column a and return the date /and/or an account number in column b, only if the date was during jan 2009?
The reason i want this is to use a lookup on the account numbers to return specific items of info, but i only need the account numbers if they occurred in specific months which i want to choose.
View 9 Replies
View Related
Aug 4, 2009
I have 5 years of data in 2 columns:
Col A. Col B.
8/2/2004 Value 1
to
7/31/2009 Value n
I have a table set up as follows
1 2 3 4 5 6 7 8 9 10 11 12
2004
2005
2006
2007
2008
2009
I was wondering how I could construct a conditional statement to pull the associated values with the given month and year in the table...
I tried the following to no avail... I'm just getting a zero value:
=AVERAGE(IF(MONTH(J6:J1255)=AC$35,IF(YEAR(J6:J1255)=$AB37,K6:K1255)))
View 9 Replies
View Related
Feb 21, 2008
I have the following variables in these columns
Column 1: Ship (1064, 1065, 1066 as the field contents)
Column 12: Date (21-Feb-08 as format)
Column 13: Weld Length (1000 as format)
Column 15: Defect Length (1000 as format)
What I need doing is the following is in a single cell per month add up what the total weld length is as well as the defect length as I have Jan 08, Feb 08 etc on another sheet where these values will be returned.
There is a seperate sheet for each Ship so would like a formula that I could ammend 1064 to 1065 etc
View 9 Replies
View Related
Jan 4, 2014
How I can subtract a year when I formulate based on if the current month is January.
Such as Current month = January 2014, I would require the cell to populate December 2013, any other month would return the current year value.
I have currently tried { =DATE(YEAR(A3)-1,MONTH(A3),DAY(A3)) } whereas cell A3 uses NOW() function formatted to MMMM, but it changes for every month.
View 9 Replies
View Related
Apr 15, 2014
I'm using this formula to count how many times the date in column C and the text "WON" appears in column I and it falls within the month & year that is in Z65.
=COUNTIFS(INDEX(C:C,$AL$15):INDEX(C:C,$AL$17),">="&DATE(YEAR(Z65),MONTH(Z65),1),INDEX(C:C,$AL$15):INDEX(C:C,$AL$17),"
View 2 Replies
View Related
Oct 15, 2007
I have a sheet in my workbook with at least 180 small tables, there may be more.
I woulds like to be able to change total formulas for all tables at once to show either year-to- date or total year.
For example:
If we have only progressed through the second period of the year, I would like to choose something to indicate period 2. At other time I may want to know the total year whether the periods are completed or not.
View 9 Replies
View Related
Jan 29, 2010
I'm after a formula this time ... i've searched the board and can't find what i need.
a cell shows 2009 December
and i'd like a formula to covert this to 31st December 2009 .... i.e. for any cell i'd like to know last day of month... and month and year ..
View 9 Replies
View Related
