Sum X Values Of A Range Where X Can Change
Dec 10, 2013
1) I would like to sum (or average) the top X numbers from a range.
2) I realize that this can be done with the Large function and an array list, and I have done that, however, I would like more flexibility than that.
3) Ideally, I would like to input a value for x in a cell and then the formula would refer to the value and select that many from the range.
i.e. I have rows 5-20, each with 10 values. I would like to average the top 5 values of each row. I can enter 5 in cell C1 and it will return the average of the top 5 numbers for each row (think grade book with 10 assignments). So each student has an average grade based upon their best performance. Then, without changing any of the formulas, I just enter the number 7 in cell C1 and the averages now use the top 7 values instead of top 5 and I do not have to make any changes to the averaging formula at the end of each row.
View 1 Replies
ADVERTISEMENT
May 23, 2014
I am trying to change values using Range and it doesn't quiet work.
Code:
Range("C2:C100").Value = Range("I2:I100").Value
View 2 Replies
View Related
Feb 28, 2012
Have a query that pulls general ledger data. Named Range SALES defined for Sales Account numbers. What is the best way to always have SALES (which pulls as negative number) converted to absolute values?
I have in my mind that it would be some sort of worksheet change event . . . but I don't really grasp the byval/byref TARGET concept by itself, let alone whether it can work on a named range.
View 5 Replies
View Related
Nov 22, 2007
I want to change the colour of a cell depending on its value, when compared to another row of data identiified by a value in another cell. To try an clarify:
b3 = 1 b5=4 Because b3 = 1 then compare cell b5 with the row g1 as b3=g1 then depending on its postion set a colour
g1= 1 g2:g5 = 2,3,4,5,6
h2= 2 h2:h5 = 7,8,9,10
View 2 Replies
View Related
Oct 27, 2008
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
View 6 Replies
View Related
Oct 2, 2011
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
View 9 Replies
View Related
Jan 29, 2010
I want to drag a formula however i want one of the values of the formula to change and the other not to change. for example:
c1=a1+b1
c2=a1+b2
c3= a1+b3
: : :
how can i make it do this when i drag? a1 is not just a constant and it depends on other parameters.
View 3 Replies
View Related
Aug 13, 2012
I'm coding a userform where there are some comboxes which are popolated by values coming from Sheet2. Up to now I work it out (maybe its not elegant but it works).
Now I would like that when the user selects one combobox the values of the other comboboxes are set accordingly to the grid in Sheet2.
Please download the XLS file at: [URL]....
View 2 Replies
View Related
May 30, 2009
I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
View 11 Replies
View Related
Mar 27, 2012
I have recorded the code below that does what I need, problem is I will use the code on files with various amounts of rows. What can I change in it so it will work on all different size files.
Code:
Sub Macro3()
'
' Macro3 Macro
[Code]....
View 6 Replies
View Related
Sep 17, 2013
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
View 8 Replies
View Related
Jun 3, 2009
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
View 13 Replies
View Related
Jun 5, 2012
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
View 2 Replies
View Related
Aug 31, 2012
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies
View Related
Jul 14, 2009
I'll attach an example.. I just can't seem to figure out how to update the range if I have already named it something using the Name Box to the left of the Formula bar.
View 2 Replies
View Related
Dec 23, 2011
Is there a formula that would allow you to take the average of all values within a range but not count the zero values? I thought something like this might work but it's not. Neither one worked.
=AVERAGEIF($E$4:$E$34,">0")
=AVERAGEIF(E4:E34,">0")
View 9 Replies
View Related
Mar 14, 2013
I am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code
View 3 Replies
View Related
Apr 21, 2014
I have different reports, some have fifty transactions, others have thousands. My goal is to: Insert a new row every time the values in the "Account" column meet a certain criteria, AND THEN add the totals for the Debit and Credit Columns.
Let's say I start with a table that looks like this:
A
B
C
D
Dept
E
Account
T
F
F2
G
Debit
Credit
Total
33010
[Code] ....
I want to group the first four rows because Accounts 33010 and 33015 are in the same department. Same with 50050 and 500060. I want to then insert a row below the last row with "33015" as its Account #. And add the values for Debit and Credit. It'd look like this:
A
B
C
D
Dept
E
Account
[Code] .........
Honestly, I have tried everything. Running a Macros with Relative reference does not cut it.
View 8 Replies
View Related
Mar 25, 2009
I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer
For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function
View 9 Replies
View Related
Oct 2, 2008
I want the value in cell D12 to change automatically when I put in certain values. If I type in "Weather" I want the cell to change to say "WOW". If I type in "Bell Run" I want it to change to say "BR".
View 9 Replies
View Related
Jun 11, 2009
I have a spreadsheet which contains values and text. Would I be able to change selected values to a minus value by clicking one button?
A2 = 200
A3 = 300
A4 = 1000
B3 = 50
C5 = 600
Changes to
A2 = -200
A3 = -300
A4 = -1000
B3 = -50
C5 = -600
I would also like the option to change them back again as well.
I have about 40 values so do not want to do this manually.
View 9 Replies
View Related
Sep 9, 2009
In column A I have a unique number.
In Columns B,C,D,E F and G I have various data
What I would like is to select a Number from Column A and the Row that contains that number Columns B,C,D,E F and G I want to change these Cell Value to 0
For example
Unique number in Column A is 1052
This appears in Cell A452
The cells Values of B452,C452.D452,E452 Etc to G452 change to 0
View 9 Replies
View Related
Dec 12, 2011
I have is looking up the values between 2 numbers in a row, and match it with range of values between the numbers in a column:
Example: ColA ColB
Row1 3 7
Row2 5 10
and so on...
Column C
R1 3
R2 5
R3 7
R4 9
R5 11
R6 13
and so on...up to 20 rows
What I want is match the range of values between the 2 numbers in ColA & ColB with the range of values between the numbers in R1 to R20 in ColC,
Then in ColD I want it to display "Y" beside the numbers if the range of values of Row1(3 to 7) matches with this range of values in ColC
Then in ColE I want it to display "Y" beside the numbers if the range of values of Row2(5 to 10) matches with this range of values in ColC
So what I like to see is...
in ColD,
"Y" beside 3,5 and 7
in ColE,
"Y" beside 5,7 and 9
and so on...
View 3 Replies
View Related
Oct 27, 2008
i want to put a subject for a negative values, how should i do it?
For example:
lookup_value: -1000
table_array:
<0 - Poor
0-10000 - Good
> 10000 - excellent
is it possible to do this? ALternatively see the (new) attachment for clearer question.
View 8 Replies
View Related
Aug 3, 2006
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................
View 2 Replies
View Related
Sep 27, 2007
I have two named ranges 'wrkNRP' and 'wrkQTY'.
Instead of totalling each range seperately, I need a way (within VBA) to go through every value in both ranges and mutiply them together, then record the total- e.g.
wrkNRP has the values
10
20
30
40
wrkQTY has the values
10
20
30
40
Then I need a way to do (10*10)+(20*20)+(30*30)+(40*40)
Is this possible WITHOUT adding an additional column?
View 4 Replies
View Related
Aug 14, 2014
I created a multipage spreadsheet to track stocks. Two pages import quotes from Microsoft automatically about every 10 minutes. The main page organizes these stock quotes next to the symbols. Stock price, $ change, then % price change.
For example, for symbol INTC,
PRICE cell is =Quotes!D120.
$ change is =Quotes!J120
% change is =Quotes!I120
Now all of a sudden, during a random refresh, EXCEL IS CHANGING THE VALUES from D120 to AB120. J120 to AG120. I120 to AH120. That was after fixing it earlier today. Earlier today it randomly changed those values to something else. Like A, T, and V substitutes for the proper fields. This is happening to about 10 stocks in a row, but I think I saw it on a couple others earlier. It is as if someone is changing these fields (but they aren't!) The fields on the pages being pulled from are staying the same.
Using Office (Excel) XP on a Windows 7 PRO 64-bit OS.
View 1 Replies
View Related
Oct 10, 2008
I'm creating a simple spreadsheet totalling units of alcohol up. Is it possible to change the colour of the fornt when different values are reached? For example if a total of under 8 units is reached this is displayed in green, if over 8 the figure is shown in red.
View 4 Replies
View Related
Aug 2, 2013
I have quite a complex spreadsheet that features some circular formulas in it, which work out fine with Iterations set to around 1000. The spread sheet functions exactly as it should, except for when the document is saved the values in the column which features the circular formula alter. This is the formula I have:
=IF(U3<0,0,MIN(40,R3+S3)-MAX(22,R3))
When I calculate, the figure is positive or 0, as it should be. However, when I go to save, the formula ignores the U3<0,0 and returns a (correct but undesired) negative value.
This means that every time I open up the spreadsheet I have to recalculate. While this isn't the greatest problem ever, it's frustrating!
View 3 Replies
View Related
Jun 3, 2014
I have a sheet with many active x check boxes already created but with visibility off. I want code that turns on the visibility, repositions, and checks certain check boxes whose name is based on values in an array named configs.
Here is the code with the problem line indicated:
[Code] ........
The repositioning and visibility work fine. I get an "object doesn't support property or method" error on the indicated line. What is the proper syntax to do this?
View 4 Replies
View Related