Is there a formula that would allow you to take the average of all values within a range but not count the zero values? I thought something like this might work but it's not. Neither one worked.
=AVERAGEIF($E$4:$E$34,">0")
=AVERAGEIF(E4:E34,">0")
I have an issues with a formulae I have written to measure two factors;
A; How many different countries appear within a certain date range. B; What countries are they.
I tried a unique list, but could not get it to work within a range? I dont particuarly care how the data is pulled through as long as I do it. At the moment I have become stuck in 'Unique Ranges' and have n given up?
The formulae issue is in the tab "Problem_Formulae", the dat in the sheet 1, and the date ranges in sheet 2. Also, just to make life a bit more challenging pivot tables are a no go .
I am looking for a formula for the following:
If there is nothing is U6:W6 return blank
Otherwise sum the contents of Bf6:BH6 and divide by the number of cells that are not empty in the range U6:W6 (to get an average of only the values in that range not including blanks).
I need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
I have a problem when Im trying to calculate averages in my pivot table. I dont know how to handle my missing values. If I leave them blank I cant get the average at all because the values end up under the dates instead of in a column next to the dates where I want them to be. If I write 0 it uses it as a value, eg 2+2+0 and i get 1,33 instead of 2. Also the zero could be a value for some of the parameters, so it's no good.
I am new to pivot tables.
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I have a column, we'll say E18:E2500. In the cells in that column are four digit numbers. Some of these cells may have multiple four digit numbers separated by a comma and a space. (example: 2020, 2100, 3120) Some other cells in the column may also share the four digit numbers (I mean duplicates).
So I'm trying to write a formula to sum and count all the unique values in the cells and in the range. This is what i've been trying to use but it counts all the values with no regard to duplicate values:
=SUM(IF(LEN(TRIM($E$18:$E$2500))=0,0,LEN(TRIM($E$18:$E$2500))-LEN(SUBSTITUTE($E$18:$E$2500," ",""))+1))
I have the following macro (as part of a much bigger set of code that adds some formulas to to cells to return the total number of unique values. The problem is, this part of the macro takes over 10 minutes to run. Is there a quicker way of doing this or am I going to have to just wait it out each time.
The columns B and/or H is a formula. Column W is an string value.
FYI the last row it is counting to is between 4000 and 30000 lines in each of the formulas
Code:
Dim IRMatRow As Integer
Dim IRMisRow As Integer
Dim UKMatRow As Integer
Dim UKMisRow As Integer
IRMatRow = Worksheets("Matching Stats").Cells(Rows.Count, "H").End(xlUp).Row
[Code] .........
I'm currently using the below formula to calculate the values within a certain date range.
=SUMIFS(C2:C100,B2:B100,">=2014-06-27",B2:B100,"
I am trying to do a stock ( goods) inventry for a catering industry, meaning most good swill keep havinf cost prices changing.
I am trying to use a LIFO system. To achieve the end result, i am trying an average formula and i am trying something as follows:
=SUMIF(I4:I20,">0",I4:I20)/COUNTIF(I4:I20,">0")
To try it out, i created a similar page with the same amounts but using a normal multiplication and division formula, the totals dont marry.
I would like a formula which will look at a range of cells, for instance a2:g2 and count how many of the cells contents are the same. The cells contain a combination of text and numbers.
View 9 Replies View Relatedi have a spreadsheet that contains a column for each day and i need to input the count from another tab for certain data...example as follows:
column A shows types of fruit - apples, bananas or oranges, row 1 contains the date (todays date, weekdays only) - the count of each fruit needs to be entered in rows 2 (apples), 3 (bananas) & 4 (oranges) for each fruit for each date
i copy and paste a daily report into a new tab in this workbook -Raw Data (the data is always in the same format and the info i need is in column J...."555" = apples, "666" = bananas & 777" = oranges)
i have used the below formula which works:
apples =COUNTIF('Raw Data'!$J$5:$J$65536,"555") etc
however the daily report that is pasted into the Raw Data tab only relates to the current day (date is present in this tab in A1)...how do i get each daily column to only display a count if the date in row 1 matches the date in Raw Data tab A1?
also how do i keep the previous days' data to keep what the count was for that day (instead of counting the current count of the new data only relevent for today)?
I need to input a formula that will produce a "yes / no" result if a "0" value appears consecutively six or more times.
Using the date below (ranges A1:Q1, A2:Q2 and A3:Q3), I need cell R1 to read "yes", as there are 7 consecutive "0" values. Cells, R2 and R3, however, need to read "no" as there are less than six consecutive "0" values in rows 2 and 3 respectively.
A
B
C
D
E
F
G
H
I
J
[code].....
I am finding many posting on this topic with unique numeric values and have not come across one in regards to a text value. The essence of the formula is looking through a list for unique email addresses and now I need to up it to a date range and eventually a store # range
I am using the following array formula to establish an overall count:
=SUM(IF(FREQUENCY(IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""), IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""))>0,1))
Ctrl+Shift+Enter
The date column is E:E.
The store number column is G:G
The attached workbook has two tabs:
1. Burn Rate - this is where I need my formula to calculate
2. prorder - this is where the table will be
What I need:
1) from 'Burn Rate', get the 'PO ID' we will look up in the table.
2) go to 'prorder' - when the 'PO ID' there matches that same 'PO ID' from the other worksheet - take the value in column F - this is the number that will be averaged.
In other words - in 'Burn Rate', for a given 'PO ID' (column A), I want to average all of the values that are found in column F in 'prorder', and return that average to 'Burn Rate' (column B).
I need to find average of the values , the count of the cells will be dynamic (may be 5 or even 200).
View 2 Replies View RelatedI have a collumn with lots of different text values some repeated. how can i count all these values so that it only counts each value once.
e.g
if in cell A1 i have = "apples"
and in cell A2 i have "apples"
and in cell A3 i have "Pear"
I have a worksheet which has various figures for each day of the week however I need to establish the weekly average of these figures.
Due to the way in which the figures are displayed, I am unsure how to use a formula which does not require a range with cells located adjacent to one another.
I have attached a test sheet as an example. The cells in yellow require the formula and I need a weekly average for criteria 1-3. This formula also needs to be compatible in Excel 2003
Test Sheet.xls
I am trying to calculate average for values in a range of data that fulfill a certain condition viz. >1000 &
View 5 Replies View Relatedhow to create a formula that creates an average but excludes the top 10% and bottom 10% values?
View 5 Replies View RelatedI cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
I have a list of values on my spreadsheet in a similiar order to this:
17.91
16.59
15.00
14.86
13.56
12.17
11.01
0.0
I use the average function to work out an average for all the values, but since the value of 0.0 is showing i should not include this as an average. the range of values above (8) will always be the same for the month - so i need to find a way of omitting the 0 value without keep changing the formula
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
I have a table that looks like this (its basically a historical data of a stock exchange):
Date
Index
January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range.
Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
In Range A1:E2 I have values
1.89 1.99 2.09 3.40 2.25
1.90 2.10 1.90
I need in Cell F2 a formula to produce the figure -0.33 (1.90-1.89+2.1-2.09+1.90-2.25)
The 2nd row minus the first row, but only include or consider the columns that have a value on the 2nd row
I'm currently using this formula to calculate the average values in column B where the value in column A ='s E1 eg:
=AVERAGEIF($A$2:$A$21,E1,B2:B21)
Instead of doing this however, I need the formula to calulate the average from column B where the "Date" in column A ='s the year and month I specify in other cells.
Year value specified in: F1
Month value specified in: G1
I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......