I have a working SUMPRODUCT forumla, which sums the numbers in column B that are between two dates (column A) that I specify.
Is there a simple way to turn this into a count? I thought maybe a COUNTIFS formula, but that can't get the count between the dates, as only one criteria is applied to each range.
I want to know the formula which sums up volume and multiply it with given price to get the value by category. An example is given in the encl. excel file.
View 3 Replies View RelatedI have a spreadsheet with 3 coloumns. In A I enter Address, B Date, C Ward/District Area (this is a data validation list). At present I use; = SUMPRODUCT((HFRA!B4:B2000>=Summary!B1)*(HFRA!B4:B2000<=Summary!B2)). Summary B1 and B2 are dates to search between e.g 1/01/07 and 31/01/07. The above formula only counts the date enteries between B1 and B2.
I would like to change this so that it still checks that the date still falls between B1 and B2 but is adds together the numbers entered in coloum A. So coloumn A would become number of completed actions not an address.
I'm using the following formula to get a count of records that have a matching function name that is in B10.
=SUMPRODUCT(--('Oct-2007_FunctionSurvey'!$T$2:$T$1498=B10))
My Problem: There are duplicate entries in my recordset based on COl A (AppID).
How can I change the formula to only count the occurences of the B10 values based on a unique AppID (col A)?
I am using Office/Excel 2007 and Windows 8
I want to determine the number of values SUMIF/SUMPRODUCT functions used/checked to arrive at the answer, i.e. 95 for row 2 and 116 for row 3. A function that can give a 3 and 2 respectively.
Example:
Results for Row #2 gives: 95 with 3 values picked up under "Rate"
Results for Row #3 gives: 116 with 2 values though three places were checked up under "Rate"
How can I count the number of these values referencing at the "Rate" like in the functions used.
I managed to use SUMIF/SUMPRODUCT functions to calculate totals based on "Rate" in row one.
I tried COUNTIF function, but allows only field/heading.
A
B
C
D
E
F
G
[Code] ..........
results for each formula used
95 formula: =SUMIF(B$1:G$1,B$1,B2:G2)
95 formula: =SUMPRODUCT((B$1:G$1=B$1)*(B2:G2))
3 formula: =COUNTIF(B1:G2,B1)
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies View RelatedI have the following formula's:
SUMPRODUCT(($O$9:$O$259="Active")+0)+SUMPRODUCT(($O$9:$O$259="Clearing Tmrw")+0) and
SUMPRODUCT(--($O$9:$O$259="Active"),$B$9:$B$259)+SUMPRODUCT(--($O$9:$O$259="Clearing Tmrw"),$B$9:$B$259) and
SUMPRODUCT(--(YEAR($A$9:$A$259)=$E$4)*($O$9:$O$259="Active"),$B$9:$B$259)+SUMPRODUCT(--(YEAR($A$9:$A$259)=$E$4)*($O$9:$O$259="Clearing Tmrw"),$B$9:$B$259)
My spreadsheet A1 to Q7 are where the headers and above formula's are and row 8 is hidden and has other formula's in (col C,M,N,O,P & Q)
The User then clicks the insert row macro which inserts a blank row (with row 8 formaules) into row 9.
However, the above formula's then change from 9 to 10 therefore, not picking up all the amounts.
Can anyone help me so that the formulas continue from row 9 ?
I have the following formula:
View 4 Replies View RelatedI have a spreadsheet in which I am using SUMPRODUCT. As you can see from the attachment, on the "Breakout by PIpeline" tab, Columns C, D & F are working perfect. However, Column B & E are duplicates of C & D - just wanting to pull the volume from the "Detail" tab instead of the dollars...and I keep getting the #VALUE! error.
I have tried formatting the Volume column differently - and even multipling the data times -1 and then pasting back in.....
How to add another sum to this formula?
this is the formula i have at the moment
=SUMPRODUCT(--($AA$21:$AA$6376
Here's my question.
jan- feb- mar- apr- may
rep a 1 1 2 5 1
rep b 1 2 7 7 7
rep c 5 5 1 2 2
rep d 1 1 1 1 1
rep e 2 2 2 2 2
rep f 1 2 3 4 5
rep g 0 0 0 7 9
date date
March May
How do I set it up so that I will have two cells that will contain a month. Once the 2 months are selected it will give me the total for each rep during that time period? Do I use sumproduct?
I have a report with a macro that imports a .TXT file into Excel then calculates the follwing formula. For some reason, before the .TXT file is loaded the formula is fine and has no errors, then when it is run I get a "#NAME?" error. I thought it might be because the formula changed during the macro but that's not it. Examples are below.
I've looked online and tried naming the ranges, but that doesn't work. I've tried the built in help but that didn't help. I've tried making sure the analysis pak is installed but that's not it either.
I've ran out of ideas now and you guys are my last hope. Any clues...??
Before macro:
=SUM(SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status"DEAL"))-SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status="AWAI")))
After macro:
=SUM(SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status"DEAL"))-SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status="AWAI")))
=SUMPRODUCT(OR(MIS!$T$4:$T$2042>500000)*(MIS!$U$4:$U$2042>500000))*(MIS!$Z$4:$Z$2042=C2)
it is if the cell in Column T >500,000 or the cell in Column U is more than 500,000. I keep getting a value error and I can't find a way around it.
I'm working on a project on predicting future cash flows from loans we have made and have ran into a wall as i can't figure out the formula to achieve what i would like to do. I've gotten a lot of help from you guys in the past and would appreciate any help you may be able to provide for this problem. So here it goes. First, here is how i have the spreadsheet setup.....
View 9 Replies View RelatedI've got a spreadsheet that had _many_ sumproducts and calls to vba functions and when it recalculated took some time to finish, so I thought I'd group the vba function with the sumproduct to see if it was faster, but I keep getting a #Value! error. The sumproduct layout worked fine on the actual spreadsheet, so I'm sure something is lost in translation. Here is my
Function weight(Aref As Range, count As Integer, Bref As Range) As Variant
Dim i As Integer
Dim top As Integer
Dim vA() As Variant
Dim cA() As Variant
Dim vR As Range
Dim cR As Range
Dim count As Integer
count = Widgets.Rows.count
ReDim vA(count - 1)
ReDim cA(count - 1)
top = Aref.Rows.count
For i = 0 To top - 1.............................
I seem to get a sum of 0 when I use this sumproduct syntax: SUMPRODUCT(($R$77:$R$442="H")*($Q$77:$Q$442="OTE"),(D77:D442)). What am I not doing?
Below is an e.g. of my data
CDEFGHIJKLMNOPQRAdmin4444440 ...
=-SUMPRODUCT((Catagory=$A26)*(MONTH(Paid_Date)=12)*
(YEAR(Paid_Date)=12)*(How="Till")*(How="Banking")*(Expenses))
This problem is I keep getting a #Value! error when I place the date section into formula. I have check to see thatthe date format is correct and as far as I can tell it is EXAMPLE: 06/12/2007
This formula did work in a nother worksheet, thus the confusion Ihave
The other issue is how to get two different text items in the "HOW" group to be True for Formula to pull requested values???
Now I am trying to build a user-defined function to use it.
It works in EXCEL but I can't get it to work in VBA
Function xxx(x,y)
Dim a, b, c As Range
a = Range("a4:a14") ' contains text
b = Range("b4:b14") ' contains text
c = Range("c4:c14") ' contains values
Range("a20") = Application.SumProduct((a = x) * (b = y) * c)
End Function
If B97:158=GL AND C97:C158=0001 THEN SUM E97:E158 OTHERWISE "0.00". I can't figure out the best formula to use.
View 2 Replies View Relatedsum with criteria. The solution was: = SUMPRODUCT(($A$7:$A$41=$A45)*($E$7:$E$41))
That was great, but, i need this every week, for a report, and not always all are in the same cells, and this formula is into a code, so the code loses sense when the week change. I tried to change the formula into a code, but it's impossible for me, although i have read all the post about it and sumproduct vba code. So, every week i use the same ranges in my code. So, for example:
A7:A41 in my code is:
Range(cells(7,1), cells(LastCell,1)
because i don't finish every week in the same row of column A
A45 is
Cells(LastCell + 4, 1)
I attach the same sheet of the other day
I am trying to arrive at the results in the yellow cells without needing the blue cells inbetween.
A sumproduct would be best but the 2nd row of blue cells has an if statement in it.
I am trying to do a sumproduct formula with hours and it is not calculating right.
Here is my current formula:
=SUMPRODUCT(([Productivity.xlsx]Occupancy!$A$2:$A$5000>=$C$1)*([Productivity.xlsx]Occupancy!$A$2:$A$5000<=$C$2)*([Productivity.xlsx]Occupancy!$B$2:$B$50ry00=$A4)*([Productivity.xlsx]Occupancy!$C$2:$C$5000))
My values in Column C that I am trying to get the sum of are:
1:24:49
:59:08
:58:46
1:39:19
1:10:08
1:13:15
1:04:23
1:43:04
1:23:55
1:48:11
1:42:41
The result of the sumproduct I am currently getting is 7824:00:00, however when I select the above values, Excel is showing it should be 13:09:45 in the status bar, which seems accurate.
I am not sure what I am missing to get this same number.
I would like to create a formula in D7 that calculates the weighted average growth for products (column A) manufactured by Bob (column B). In J5 I've inserted the expected result using a SUMPRODUCT function.
How to create a formula in D7 that will calculate from the data in B6:D6 the same result as in J5. i.e. How do I make the SUMPRODUCT function only consider data in columns C and D when Bob is the manufacturer?
I am using SUMPRODUCT to check if the word "Yes" appears in two colums andcount the number of occurances.
Many of the cells in the range evaluate to error #N/A - this is unavoidable.
As a result, SUMPRODUCT in the formula
=SUMPRODUCT(--(H12:H486)="yes")*(--(Q12:Q486)="yes") evaluates to #Value.
I have tried to error trap this using
=SUMPRODUCT(--(ISTEXT(G12:G486)="yes"))*(--(ISTEXT(P12:P486)="yes"))
But this evaluates to #N/A.
In this file I have a team in column A, in B are the relative number of games they have played, and in C the filed goal % for them in that game. The value I am trying to return the average field goal % for that team in there last 10 games. I thought the sumproduct would work but is not returning a value,
View 11 Replies View RelatedI am trying to add an additional criteria to the following sumproduct formula. The formula below works fine to add up values that are within a date range. However, I want to add values within a specified date range as well as one additional variable. The additional variable is in column G.
SUMPRODUCT(--($A$3:$A$1015>=$A1026),--($A$3:$A$1015<=$B1026),D$3:D$1015)
I'm attempting to do a sumproduct with different dimensioned ranges. I've read multiple posts that say that all ranges in a sumproduct must have the same dimensions. I've tried different commands (index/match/lookup, etc) with no luck. Perhaps someone can come up with a solution for me....
View 7 Replies View Related=((SUMPRODUCT((('Data Sheet'!$A$2:$A$997<2110000)+('Data Sheet'!$A$2:$A$997>2119999)),--(ISNUMBER(MATCH('Data Sheet'!$B$2:$B$997,{300100,302100},0))),('Data Sheet'!E$2:E$997*IF('Data Sheet'!E1<=$F$4:$G$4,1,0))
The last part of the formula is the problem, the first two arrays are conditions and the last array is a sum if f4 a period of the year is equal or less to the data sheet tab it is summing.The formula below works fine, but when the last condition is added it doesn't work.
=((SUMPRODUCT((('Data Sheet'!$A$2:$A$997<2110000)+('Data Sheet'!$A$2:$A$997>2119999)),--(ISNUMBER(MATCH('Data Sheet'!$B$2:$B$997,{300100,302100},0))),'Data Sheet'!E$2:E$997)
I need to C8 - C19 only to add up jobs won by andrew (in current orders). It needs to be month specific. what i mean by that is I need the formula to do what its doing now (adding up the jobs by and putting the totals into the according cell depending on what month they were won.
View 2 Replies View Related
