Suppress Save Dialog On Before Close Event
Jan 5, 2014
I have a command button code on a sheet that checks if all the cells in a table have been completed before saving the worksheet. If they're not all complete a userform message box pops up with a reminder then returns to the sheet without saving. I want to be able to call this from the 'BeforeClose' event as well however, even though it still does what it's supposed to do, after the userform message box has displayed and been unloaded then it still pops up the Save Dialog box.
I'm struggling to suppress the Save Dialog box and return to the sheet.
View 1 Replies
ADVERTISEMENT
Jan 9, 2009
I'm not sure what I'm missing here, but I am trying to exit a spreadsheet using VBA code without saving changes.
The following code, to my mind, should work, but I keep getting a dialog asking if I want to save changes.
'* ensure workbook does not request user to save it...
ThisWorkbook.Saved = True
'* exit Excel...
Application.Quit
View 9 Replies
View Related
Jan 16, 2007
I need to use the BeforeClose event to save the workbook with the same name when a user closes it. (82 users and they all seem to want to give it their own name.) I have the following code in the BeforeClose event but would like to eliminate the prompt "this file already exists, do you want to replace it" I have tried using the Application.DisplayAlerts = False but this seems to stop the workbook from saving.
I have a public demention called wbName and is set to the workbook name in an outo open macro
Public wbName
Public Sub auto_open()
wbName = ActiveWorkbook.Name
UserForm2.Show
MsgBox "PLEASE do Not insert rows/columns or enter calculations" _
& Chr(10) & " " _
& Chr(10) & "Enter Only Account Name, Date, and Corresponding_ Calls/Details", vbCritical, "Caution"
End Sub
View 6 Replies
View Related
Jun 6, 2014
I have some code which calls up a Solver equation. I'd like to be able to suppress the confirmation dialog. I tried application.displayalerts=false, no luck...
View 1 Replies
View Related
May 30, 2008
When I open a particular workbook by double-clicking in My Documents or using File|Open, I want to suppress the dialog box that appears requesting to update links in the workbook. I want to suppress it using code, perhaps in the workbook_open event?
View 4 Replies
View Related
Aug 31, 2009
I have a summary file (I'll call it File A) from which a macro is run. It opens other files, finds a "total line" then copies it into File A. Then it closes that file, opens another, and repeats the process. The macro works fine for most of the files it opens and closes, but on some of them, upon the close command, a dialog box pops up asking "Do you want to save the changes you made to "File B.xls"?
I'm not sure why this comes up as there were no changes made. Cells were only copied and pasted into another file. Is there a way to stop this annoying box from popping up? It slows down the macro by waiting for human input. here is my
View 4 Replies
View Related
Jul 26, 2013
Say I have a userform with one textbox and one commandbutton labeled �Cancel�. The textbox has an exit event to edit the data entered to the textbox. The commandbutton has code to unload the form.
The first time the Cancel button is clicked and the textbox has the focus the exit event of the textbox is triggered, but the form is not unloaded.
The second time the Cancel button is clicked the form is unloaded because the textbox no longer has focus.
How can I suppress the exit event from being triggered when the Cancel button is clicked if the textbox has focus?
View 8 Replies
View Related
Sep 6, 2012
I'm trying to make a macro check if a file has been saved (ever). If so I want the macro to do a regular save (with already esatablished filename and location) before it proceeds with the rest of the macro. If the file hasnt been saved (if it runs from a new workbook) then I want it to pop up the save.as dialog, so that the user can choose the name and location of the file before the macro continues .
The macro itself is saved in personal.xlsx.
View 1 Replies
View Related
May 10, 2008
I would like to add some icons on the left side of excel open file pane to faciliate my work. Because i need to load some files under the same folder many times a day. Does anybody know how to do that? I've seen people has more icons on the pane before. The defaut setting has only 'History', 'My Documents', 'Favorites', 'Desktop' and ' My nutwork places' on it.
View 2 Replies
View Related
Jul 12, 2007
Related to my thead here, is there a way that the Find dialog can be automatically closed after the find?
View 7 Replies
View Related
Sep 17, 2007
Here's a problem that I having and I'm wondering if someone could give me some insight as to why this is happening.
Hist of Issue:
Most of my projects for my employer are required to run various times of the day and various days of the week. So in order to accomplish this I use the "Digital Signature" to sign my apps so that when setting macro security to Medium they will still run.
When a particular app loads there is a Userform that I created which displays and allows the user to bypass automatic execution. This allows me to be able to work on the workbook without having to abort any automatic executing code. See "MyAutoStart.JPG" for an example of this.
Now somewhere down the line, and I'm not sure when though, up until this point I was living with the problem and now I must solve it. What happens is that I have a project that when it runs and then closes it displays the dialog box which asks for the VBA Project password.
View 9 Replies
View Related
Nov 2, 2009
Each of the worksheets in my model use A1 as a control cell for any errors and inconsistencies. My aim is to disable save and close commands in case A1 is not equal to 0 in any of the worksheets.
The code I currently use for that purpose is as follows.
View 2 Replies
View Related
Oct 21, 2008
I'm building my first Add-In, which I'm using to gather all Sub's that I've created through my small VBA writting career. The thing is that when I write new code and some reason exit Excel and forget to save the XLA, obviously the code is lost. I've used:
View 4 Replies
View Related
Apr 7, 2009
I have a MS Access db in which I have two delete queries called 'qrySessionsCompleted1' and 'qrySessionsCompleted2'. What VBA code can I use in the BeforeClose event to run these?
View 9 Replies
View Related
Jun 18, 2009
what command can i use to bring up the save as dialog box ( where to name your saved file) if my file is already named?
View 2 Replies
View Related
Jun 19, 2009
How can this be edited so when the savebox comes up when i hit save it saves the file but when i hit cancel it goes to error:
View 14 Replies
View Related
May 26, 2006
How can i call the Save As dialog box from a macro, and pre-populate the filename field with a cell value from the workbook? I have tried this code
With Application.Dialogs(xlDialogFileSaveAs)
.Name = Sheets("Calcs").Range("b37").Value
.Show
End With
with the cell reference being what i want to show in the filename box. Each time i run it, i get an error message, "run time error 1004, application defind or object defined error"
View 7 Replies
View Related
Jul 19, 2014
I am trying to make Excel update a cell (C27) in my workbook's front page before closing, but it doesn't run at all.
Debug doesn't show any error...
Actually I am not sure if it's a code error or just the place i put this sub in.
......
Next
MsgBox "All Sheets have been updated"
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Worksheets("Front Page").Activate
If .Offset(27, 3).Value < DateValue(Date) Then
.Offset(27, 3).Value = DateValue(Date)
End Sub
View 6 Replies
View Related
Jul 22, 2008
I have a sheet that on open looks at the username and determines which tabs can be seen by that user. If macro's are not enabled, I want the sheet to just display sheet 4.
here is the code I have on open that works fine: -
Private Sub Workbook_Open()
If Environ("username") = "Bob" Then
Sheets("Sheet1").Visible = True
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = False
Else
Sheets("Sheet1").Visible = False
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = True
End If
End Sub
I have a Workbook_BeforeClose() function that does not, and I am stuck as to why!
Here it is: -
Private Sub Workbook_BeforeClose()
If Environ("username") = "Bob" Then
Sheets("Sheet1").Visible = False
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = True
ThisWorkbook.Save
Else
Sheets("Sheet1").Visible = False
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = True
End If
End Sub
So basically after "Bob" is done it will save the sheet with only tab 4 visable. This means that if someone without Macros enabled opens the sheet they can only view tab 4 (I know it isn't password protected in this example, but it will be)
View 9 Replies
View Related
Oct 28, 2006
I'm using the following code in "ThisWorkbook" of a couple of different workbooks, and the problem occurs consistently with the code use regardless of which workbook...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close False
End Sub
The code itself does exactly as it should (not save changes when closing), but shortly after the workbook has closed, any other open workbooks will freeze, then give a popup message saying an error has occurred and a log is being generated, and EXCEL shuts down (loosing any other work)...
I have searched my HDD and only found 4 .log files that reference dates that coincide with the errors, although the times don't match(?)...
Originally Posted by WinMgmt.log
(Fri Oct 27 08:12:29 2006) : core is being shut down by WinMgmt.exe, it returned 0x0
Originally Posted by wmiadap.log
(Fri Oct 27 08:17:54 2006) : Performance library winspool.drv will be ignored as it was previously disabled (WbemAdapStatus = -1).
Originally Posted by wbemcore.log
(Fri Oct 27 08:47:10 2006) : Core physically unloaded!
Originally Posted by gotomon.log
Log file started at Fri, 27 Oct 2006 08:17:46 Eastern Daylight Time
0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0x0
0:00:00 i: G2EnumPortsCore() buffer available:0 buffer needed:24
0:00:00 i: G2EnumPortsCore() -- leaving early --
0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0xc55980
0:00:00 i: G2EnumPortsCore() buffer available:24 buffer needed:24
0:00:00 i: G2EnumPortsCore() -- leave --
I had been using;
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Save True
End Sub
Which had the same error... when I changed it to Close, I thought it had been fixed, but it was just that the delay is longer before the freeze.
View 4 Replies
View Related
Oct 21, 2008
When a user tries to save a workbook I want the workbook to display the Save As dialog box. This will ensure that the template is not accidentally tempered with.
View 20 Replies
View Related
Dec 14, 2006
I want to be able to have the Save As dialog box come up, but with a File Name already chosen, so that the user can save it as this File Name in any location he/she wishes. I can get the Save As dialog box coming up with my code, but I don't know how to automatically enter the File Name
View 4 Replies
View Related
Feb 20, 2007
I am modifying a corporate macro that is used in to create a standard technical letter. This standard file has 6 macros, that once used to create the letter, are never used again. I know, the first thing that jumps out is to create an add-in. I'd prefer not to got hat route at the moment for various reasons.
What I'm looking to do is after the letter is created, and the print macro is called and prints the letter, all macros are removed (already found help for this on this site), then check to see if the file has been saved, or still has the template name, and then either save or bring up the save as dialog box for the user to save the file with the appropriate name and folder.
View 9 Replies
View Related
Jun 30, 2007
I am running a macro on startup from a template that opens the File Save As dialog box to allow the user to select a folder and filename and save it before continuing.
I would like it to default to the Q: drive, it defaults to where the template was opened from.
I used
Application.Dialogs(xlDialogSaveAs).Show
to open the dialog, I tried using "Q:" as an argument but it doesn't seem to work.
if I try
Application.Dialogs(xlDialogOpen).Show "Q:"
View 9 Replies
View Related
Feb 20, 2014
I have the below code to have the user select a pile path and save. what can I add to have the dialog box preselect the file type to macro enabled? the .xlsm extension is not doing it.
['save it under a new name
Dim fPth As Object
Set fPth = Application.FileDialog(msoFileDialogSaveAs)
With fPth
.InitialFileName = Worksheets("Project Setup").Range("f19").Text & "_ROM Estimate.xlsm"
.Title = "Save your File:"
.InitialView = msoFileDialogViewList
.Show
End With]
View 4 Replies
View Related
Jan 31, 2007
I want to close a tab delimited Txt file that is open in Excel, thru' a macro, without the save changes dialog box appearing.
View 2 Replies
View Related
Jun 6, 2008
I am trying to ask to the user to check if they logged out when they close the workbook but my code is not working...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Sheets("OD&D Log-in").Select
If Range("H5") = "reconcile" Then
a = MsgBox("Do you want to Log-Out?", _
vbYesNo)
If a = vbNo Then Cancel = True
If a = vbYes Then
Sheets("OD&D Log-in").Select
Else
Workbooks("Daily OSD Log (ver5).xls").Close SaveChanges = True
End Sub
View 9 Replies
View Related
May 30, 2009
I want a list to be sorted when a user closes the Excel DataForm. I have the code to execute the sort but how do I attach it to the DataForm Close button?
View 9 Replies
View Related
Oct 23, 2007
Application.Dialogs(xlDialogSaveAs).Show
I am using above code and I want to find out whether the user pressed the save button or the cancel button in order to take the next action.
View 2 Replies
View Related
May 1, 2008
I'm working on a time sheet, and to make it easier to enter time i created a macro that sets the auto correct to correct a "." to a ":", but when the workbook closes i want to run a macro that deletes the auto correct rule.
View 13 Replies
View Related
