I have an interactive chart displaying stacked area charts for 2006 and 2007
I currently have 2006 in front of 2007, but as the user chooses 1 of 20 units, it will look better to move 2007 in front of 2006
I have a stacked area chart located on its own individual worksheet. I would like to use VBA to apply colours to individual series based on the name of that series. I have applied the following code which I found on the following help forum, changing it slightly to fit my needs: http://www.ozgrid.com/forum/showthread.php?t=91381
View 3 Replies View RelatedCode:
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlAreaStacked
I created a simple stacked area type in vba. Is it possible and how to have this stacked area to get values from combobox and textbox?
I am creating a line chart with markers using 5 series of data. I want to colour in/shade the area under the lowest series.
View 6 Replies View RelatedI am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies View RelatedI am trying to chart a range of dates, for example. I have some boats that are on contract between dates a and b. I would liketo plot several boats with their contract date range. I have tried using a bar chart, but all the lines start at 0. I got it working using an Excel 2007 Stock chart, however, it is in the wrong orientation. I would like to Rotate the Chart 90 degrees, swap the axis, or find a better method all together. I cannot post the spreadsheet as its confidential.
View 2 Replies View RelatedMy pivot table shows Towns as the Row headings and Month as the column headings. When I do a Chart, I get Towns on the X axis and Months as Y. I want the chart to show all my May data in a stacked column, then all my June data in another stacked column, etc. If I pick "Select Source Data" the options are greyed out. What's a mother to do?
View 1 Replies View RelatedI have a two bar chart (red and blue) I'm trying to turn into a stacked chart. It has total cars and broken cars. There are a 100 total cars (10 broken). But when I stack them, it shows 110 total cars (it's adding instead of merging them). Once stacked, there should still be 100 total cars....but the tip of it should be red to show what amount is broken. It's adding the two together but it shouldn't....the number of broken cars is still part of the total.
View 1 Replies View RelatedI run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
I am trying to define a chart of TWO Stacked Bars. (it will be a little difficult for me, with my bad English, to explain – but I'm sure you will understand. My target is a chart as shown in the embedded picture. Take a look at sheet1:
This is a 75% completed chart. I managed to present the first 2 stacked bars. (light & dark green). Then I added a blank column ("D") and declared it as a "bar" on the 2nd. Y Axis. (This "D" series has now two values, of 5, which must be "Zeroed" when the chart is finished).
I managed to add the first part of the 2nd. Stacked bars. (Orange) I played a little with the Width and Overlap – and got the result shown in Sheet1. (When The "two fives" will change into 0 - the two orange bars will start from the X-Axis (Zero "Y" level)/ So far so good.
What I need now is to add the last Series (F2:F9) to be put ON TOP of the Orange Bar – but without success. If you'll take a look at Sheet2 you will see what I came up with. I DO NOT want them to be inside each other. I want them as in the embedded picture (side by side). In addition – I would love to present the Labels: Newspaper, Internet, Relevant, Non-Relv. Inside the chart (if possible)
I am trying to define a chart of TWO Stacked Bars. (it will be a little difficult for me, with my bad English, to explain – but I'm sure you will understand. My target is a chart as shown in the embedded picture. Take a look at sheet1:
This is a 75% completed chart.
I managed to present the first 2 stacked bars. (light & dark green).
Then I added a blank column ("D") and declared it as a "bar" on the 2nd. Y Axis.
(This "D" series has now two values, of 5, which must be "Zeroed" when the chart is finished).
I managed to add the first part of the 2nd. Stacked bars. (Orange)
I played a little with the Width and Overlap – and got the result shown in Sheet1.
(When The "two fives" will change into 0 - the two orange bars will start from the X-Axis (Zero "Y" level)/ So far so good.
What I need now is to add the last Series (F2:F9) to be put ON TOP of the Orange Bar – but without success. If you'll take a look at Sheet2 you will see what I came up with. I DO NOT want them to be inside each other. I want them as in the embedded picture (side by side). In addition – I would love to present the Labels:
Newspaper, Internet, Relevant, Non-Relv. Inside the chart (if possible)
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
I am trying to develop a dynamic stacked bar chart, I have a consistent number of columns defining the x axis and a variable number of rows defining the y axis (the stacked data). Is it possible to generate a dynamic stacked chart. I have tried using dynamic named ranges but I can't get it to work for a stacked chart.
View 7 Replies View Relatedi have a chart made but it will only read numbers what i looking for it to do is read cells filled. beacuse none of the cells will have numbers in them. example column I,J,K,L will have a letters in them. starting on row 2 on down till the end. what i'm looking for is if I2 has a letter in it it will read as one for the chart. and will ignore the other columns if K7 has a letter it will read as one and ignore the rest of the columns. this will go on till the end of the sheet. and all rows with nothing in them will be ignored. is this posable?
i think it is bacisly giving a value to a letter and having the chart inturpat that value as 1 and then adding them up. if posable i just thought of maybe the letter could be turned into a date to give an ongoing graph for the info. maybe thats the wisest thing to do to show what each day looks like. hmm i have to play around with it. just typing this out i think i figured a way to do it.
I have a spreadsheet where I have some data. The data is divided into two parts we have part A that is a figure and then I have a A total which is a figure which part A cannot exceed and then what I would like to do is to create a Stacked Column Chart where I have an A total column where the maximum amount is the total A and where I would like to show how much A has utilized the A total.
View 5 Replies View RelatedI would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies View RelatedI would like to display 50 sequences, S_1 ..S_50, with stacked bars. Every sequence can contain 5 different events, E_1 .. E_5, in a random order. Every event has a certain duration, t. Lets say the first two sequences are as follows (duration time is in brackets)
S_1:
E_3(200), E_1(150), E_2(300), E_4(500), E_5(300)
S_2:
E_1(200), E_4(150), E_1(300), E_5(500), E_2(300), E_2(300)
...
How do I get Excel to display all Sequences in one graph as a function of time, with the bar-stack-color displaying the kind of event. So if E_3 would be red and E_1 blue we would see
S_1:
red, blue ...
S_2:
blue, ...
Using the table, draw a stacked chart that has both the project name (A, B etc) and Month on the x-axis (below all the projects). the stacked chart should contain the count for cat1, cat2, cat3 and cat 4 for each project (in different but consistent numbers for each month).
I need this for a presentation today,
OctoberNovemberDecemberProject Cat. 1 Cat. 2Cat. 3Cat. 4Cat. 1 Cat. 2Cat. 3Cat. 4Cat. 1 Cat. 2Cat. 3Cat. 4A
00236111110001B
C
D
E
F
0012230182600425G
H
I
02114001602210J
K
L
I need to create a chart showing a timeline from 0 hours to 100 hours. In this timeline, there has to be 8 seperate segments - ie, phase 1, phase 2, phase 3, phase 4, phase 5, phase 6, phase 7, phase 8. Each phase takes a certain amount of hours (the number of hours of each phase is irrelevant for now!).
how to format this data and then how to display such a chart? I need the timeline along the X axis.
According to my provided data, draw a stacked chart with double columns, each bar includes four types of data(Internet, PBS,Branches and Mail-in/Fax-in) and the x-axis are 1Q06, 2Q06 and 3Q06 repectively. It is urgent,pls provide the template for me. Many Many to all of you.
View 6 Replies View RelatedI would like to display 50 sequences, S_1 ..S_50, with stacked bars. Every sequence can contain 5 different events, E_1 .. E_5, in a random order. Every event has a certain duration, t. Lets say the first two sequences are as follows (duration time is in breckets)
S_1:
E_3(200), E_1(150), E_2(300), E_4(500), E_5(300)
S_2:
E_1(200), E_4(150), E_1(300), E_5(500), E_2(300), E_2(300)
...
How do I get Excel to display all Sequences in one graph as a function of time, with the bar-stack-color displaying the kind of event. So if E_3 would be red and E_1 blue we would see
S_1:
red, blue ...
S_2:
blue, ...
I need to plot a stacked chart. I have attached a sample of it. I need to plot, category As X and subcategory and and its percentage as Y (stacked chart). In the attached sample I plotted a chart. The problem is, the series name showing is not correct. It takes the series name from the top row.
View 5 Replies View RelatedI have created a Power Pivot Chart with Stacked Column chart. Made one axis as Secondary Axis and the axis is Clustered Column, but it is overlapped with Stacked bars.
Is there any easy way to solve this issue, apart from creating 2 dummy columns and making it work.
I am plotting a line chart wherein the X-axis is based on % and Y-axis is based on $. I have 5 scenarios wherein they have different ranges. I want to have the X-axis plotted up to 100%. How to get the X-axis stacked at 100%. See attached file.
View 1 Replies View RelatedI am trying to chart this -
Code:
20112010
Net ($)Units Net ($)UnitsFFS** $ 808,227 61,370 $ 909,989 56,518 FFS
J-Code $ - 0 $ - 0 MCO*** $ 64,027 5,359 $ 26,691 1,614 MCO
J-Code $ - 0 $ - 0 SPAP/SCHIP $ 72,728 4,612 $ 110,592 6,490
Image can be viewed here - [URL] ...........
But I want units to appear on the secondary axis so its not so small.
