I working on a loop that would find blank cell. These cells have a formula in excel, but if certain conditions are met, the cell is left blank. What property in VBA checks for blank cell? I don't thin it's the "empty" property?
View 9 Replies
I am trying to write an Excel formula to test if there is data in pairs of cells and if there is I want to copy the entire record to another Excel spreadsheet. Example: if there is data in row 1, column A and data in row 1, Column C or row 1 column D, then copy this record to another spreadsheet; if there is data in row 1 column B and data in column C or column, then copy this record to another spreadsheet. Since there is no data in row 4, column C or column D, this row would not be copied. Row 1, row 2, row 3, and row 7 would be copied to another spreadsheet. The data can be numeric or alpha numeric.
I tried using the ISBLANK statement and can't seem to get this to work properly.
I've currently written the following code to make sure exactly 2 single cell selections are made. But now, I want to extend this code to make sure only cells from rows 5 & 7 are selected and the cells are in the same column.
View 2 Replies View RelatedI have a form that information is entered in. At the end the user can then save the information in a spreadsheet by pressing a command button. The updating to the spreadsheet works, it is the part where the last entry is tested against the info on the form to prevent a duplicate entry that do not work.
I have tested that the program reads the info from the spreadsheet (see the commented lines).
I can attach the whole spreadsheet, but some of the entries on the form are linked to another spreadsheet that make it a bit cumbersome to attach two files.
VB:
Private Sub cmdUpdate_Click()
Dim lRow As Long
Dim ws As Worksheet
Set ws = Worksheets("TonnageInput")
[Code] .....
This code is functional but very redundant and I figured that has to be an easier way to go about this.
View 5 Replies View RelatedI have a program that relies on a remote drive being open and ready. My current tactic (which works perfectly well) is to have a file in the destination drive and ask the date that file was created. If an error occurs I know the destination drive is not ready.
Code:
On Error Resume Next
temp = FileDateTime(destDrive & "xDeletedStuff" & "testFile.txt")
If Err Then
MsgBox "Destination Drive / Folder Not Ready"
Exit Sub
End If
On Error GoTo 0
Idealy I would rather not use the "testFile" I would prefer to just test to see if the folder existed, "destDrive & "xDeletedStuff"
I have to test if todays day is Saturday. Don't know the syntax.
View 3 Replies View RelatedPerforming hypothesis testing on data comprising of hours devoted to patient care per week for practitioners in conventional and alternative medical practices. I have used data analysis -> z-test-two sample for means to perform my calculations.
I would like to know if this is the correct way to perform the hypothesis calculation. See attachment for more details.
Testing For First Letter Of Entry. within an if statement, i'm testing for the first letter of another cell with the function: left(e273,1)= "D". this works well, but i only have a few letters to test for and i'd like to test for not "D", etc. (i.,e, what if the first letter is not D, then do...)...?
View 2 Replies View Relatedscenario testing and coming up with a simple "multiply by" that I can drag across a table.
View 5 Replies View RelatedI have the following codes to test Caps Lock whether it is on or off. Instead of showing a msgbox when the Caps Lock is on, I there another way to show comment or other object as well as windows UserForms
View 3 Replies View RelatedI have simple data points based on a question that how many people liked product A between 2011 and 2012.
It looks like below
2011 2012
# of Respondents 319 329
% of respondents liking the product 78% 84.5%
The question is: is the increase from 78% to 84.5% statistically significant at either 95% or 99% confidence level. Is it possible to do this basic analysis using Excel?
Basically, looking at the range E6:L19 I need to ensure that any data that is entered into any of these cells ends in either H or W, and if it doesn't flags up a warning message (which I am hoping to link in with the Worksheet_SelectionChange event)
I'm managing it for one cell, but not a whole range.
In a table I engaged the Subtotal (Sum) feature.
Then I did the Data, Subtotals.. Remove All
Jumping to the immediate window to enter
activesheet.select
? ActiveWindow.DisplayOutline
True
Excel 2007 on XP, must be compatable with '03
I have a macro that sorts sets of data that is imported from a LIMS database (SQL). The macro then sorts the data based on a characteristic of the dataset that was pulled in.
I did have the macro working, however now I must add in some AI that groups together certain datasets that don't share the same parameter, as well as discard incomplete datasets, and group together unknown datasets.
In the code following the trouble section, I isolate the required tag, placing it in labelDecoded(2). Now I must test this variable against a couple of cases to see if it is one of the exceptions to the normal rule (which is to Place it in the worksheet named after what is in labelDecoded(2). A switch statement is nessasary as this is still in a prototype/proof of concept phase, and the sorting AI will be expanded in the finished product (As in more cases will be added).
Select Case labelDecoded(2)
Case Mid(labelDecoded(2), 1, 1) = "G"
getSheetName = Gas
Case "DPLS" Or Mid(labelDecoded(2), 1, 2) = "UD"
getSheetName = "Other"
Case Else
getSheetName = labelDecoded(2)
End Select
I have highlighted the sections that is giving me an error in red. The first section "Mid(labelDecoded(2), 1, 1) = "G"" Fails to evaluate to true. The Second section "Mid(labelDecoded(2), 1, 2) = "UD"" Throws a type mismatch error, that causes the macro to execute some error handling code, which by co-incidence, is the same as that case evaluating to true.
When a switch statement is called is there an object or variable that holds the information that is being processed by the switch statement? I recognize that my problem is most likely that I am calling the variable that I have allready tested to be tested again.
I want to solve the problem of giving an alert for opening a new reagent vial for blood sugar testing
View 4 Replies View RelatedI'm trying to identify where a set of values 'agree' within a specified tolerance.
I have a list of scores from different sources, and wish to both average them (easy to do) but also to identify how well they 'agree' by flagging those which have a difference above a specified tolerance. The numbers are all integers, and the tolerance will be an integer.
To give an example, I might have cells with values (2,3,2,2) and these agree within a tolerance of 1. If I had cells of (2,4,2,2) these wouldn't agree. I'd like to flag (by the creation of an 'X' within a separate column) where these cells do not agree.
I've done this previously by using chained If and Or statements (e.g. if A1 = D1 or A1 = D1+1 etc etc) but this is laborious and means I have to change logic every time I add a new sample.
Is there a way of specifying a range of cells (e.g. A1,D1,H1, J1) and seeing if the values of these cells agree to within a stated tolerance? I'm happy to define named cells to specify and argument/attribute.
I have set up a linear regression array in Excel and now want to test the significance of my r2 value at a certain level of significance. I've only been able to find tables that give the critical r value, but I want to test it at 99.73% level of confidence and none of them contain that specific value. Is there a way to do this in Excel?
View 3 Replies View RelatedI have an excel template that is used for communicating in projects to teams their responsibilities and defining which stream/group has Accountability/Responsibility/Consulted/Informed (known as a RACI model) for the activity.
For any given project activity, there are rules:
One person is responsible for performing the activity (R)
Only one person can be accountable (A)
Many people can be consulted through the activity (C)
Many people can be informed of progress (I)
You must have an A and and an R for each activity
And one person can be accountable AND responsible A/R
Given that project activities can run to 100 + activities in some of our more complex programmes.... I'm looking to provide a flag in the spreadsheet for when an error has occurred and a gap in Responsibility or Accountability is created. (Less worried about testing for C's and I's)
See attached, I hope it is clear.
I'm the final stages of testing a userform that, in response to a button click, copies certain cells from a big messy worksheet and pastes the relevant ones (based on user input) in a clean sheet. Suddenly, I started getting a 'divide by zero' error for the following line:
VB : UpCount = PickNum - 6 + ((PickNum / 12))
UpCount and PickNum are both declared as Double, though this shouldn't matter. UpCount is being assigned a value here for the first time, and PickNum varies from 1 to about 250 depending on input.
Obviously I'm only dividing by a constant here, which is VISIBLY not zero. This error only occurs for certain ranges of PickNum...something like 50-70. Interestingly, in trying to debug it, I added:
VB:
Msgbox(PickNum)
Msgbox(54/12)
...since PickNum was 54 as I was getting this error. Just dividing 54 by 12 ALSO got a div by zero error.
Perhaps I should mention I'm using VBA in Excel 2010 for Mac.
I am running excel 2010. I have set up a variable " testvalue" type variant
I would like the prog to step through a row of data which can contain text or numbers. If any number is greater than 3,000,000 I want exit the do. However, if no number is greater than 3,000,000 I want to record this as a "bad file". I have the follow code which trips at the first "case".
Code:
testcol = 1
testrow = myTextRows - 1 'penultimate row
Do While Len(wbText.Sheets(1).Cells(testrow, testcol)) > 0
testvalue = wbText.Sheets(1).Cells(testrow, testcol).Value
Select Case testvalue
[Code] ........
I have two columns, some of the cells in these columns contain more than one value separated by a space. Example:
Col A Col B
1.99 1.69
39.95 6 119.94 29.99 6 149.94
135 250 135.00 250.00
11.6 11.60
What I am trying to achieve is to test that the values in column A match those in column B and have a TRUE/FALSE response in column C. At present i'm just using =a=b, however I want the formula to give me a TRUE response for the third and fourth lines in my example, as I want it to ignore the zero after the decimal place, at present it gives me FALSE.
So the results I want to see in col C for the above example are:
FALSE
FALSE
TRUE
TRUE
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
