I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View RelatedI have a formula in my spreadsheet that shows dates for servicing of products. Column F show's Date Last Serviced and the adjacent column (G) then shows Date Next Service. When there is nothing on the F column's cell then the date that appears on my spreadsheet is 31/12/00. It looks messy and I would rather have a formula to make it so that if the F column is blank, then the adjacent cell in G column should stay blank also.
To automatically calculate the next service due date, I have variants of this formula that creates the dates in G column:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))
I tried adding as an extra part, for example:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))&If(F4 = 0, "", F4)
It always brings back the answer of 366, and does not make the cell blank...
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedThe following are on a sheet:
A1 = 5700
B1 = 235
C1 = 17:14
D1 = 5922
$E$1 = 09:01
$F$1= 3
$E$1 and $F$1 are (the only) absolutes/constants.
A2 contains the following:
=IF(A1>D1,B1,IF(A1+B1<D1,"d",IF(AND(C1<$E$1,B1<$F$1),"",B1))))
This translates as:
=IF(5700>5922,235,IF(5700+235<5922,"d",IF(AND(7:14<09:01,235<3),"",235))))
The result is a variable/number (235), "d" or a blank cell ("").
This formula is in a column and works fine where there are numbers in corresponding cells. The problem arises with corresponding cells which appear blank (show no values) but contain references to other cells: they result in a "d" when nothing should be displayed.
So while a corresponding blank cell is correct if it shows no values, it gives me this problem - I don't want "d" or anything.
I'd like a macro that cycles down 50000 rows of column B. If it comes across a blank cell it will import the value from its adjacent cell in column A. then the macro will move onto the next cell.
View 9 Replies View RelatedI am looking for a piece of code that I can use.
Basically if cell A2 is non blank then I want cell C2 to display My Text. I want to do this for every cell down to about A250.
I want AB1 to highlight red if date in S1 is not blank and N1 doesnt equal AA1. Is this possible?
View 1 Replies View RelatedI'm trying every conceivable angle I can think of in vba and coming up empty. What I have is a spreadsheet similar to this:
Column A Column B
1. 1234567
2. 2345678
3. 3456789
4. 4567890 A0001
5.
6. 9876543
7. 9876543
8. 9876543
9. 1234578
10. 3456789 A0002
What I would like to do is to fill in B1:B3 with A0001 and B6:B9 with A0002. The number of rows in each set of data will vary, but the identifier (A000X) will always be located in the row in column B adjacent to the last entry for that set of data in column A and there will always be empty cells between data sets. The number of data sets will also vary.
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
Ok, I've come close to the solution using the Match function, but somehow just can't quite nail it.
What I need is a formula that will search down Column B until it finds the first blank cell. Then report what is directly to the left of that cell.
So If the first blank cell is in $B$5, it will report what is in $A$5.
If a cell in collumn B is blank, I want to cut text from column C at the same row and paste to column B.
View 4 Replies View RelatedI'd like to do an if statement that only brings in data from a cell if another cell is not blank...
=if(A1="not blank",A3,"")
I need the "not blank". Sometimes the cell is text, sometimes it is a number.
I have excel worksheet like this
HTML Code:Â
a b c d
1 bob math fail
2 bob biology success
3 bob (blank)
4 jane math success
5 jane biology success
6 jane (blank)
7 jake math success
8 jake biology fail
9 jake (blank)
I want to fill cell D3, D6, D9 automatically by a formula with condition if one lesson is fail then it's fail, but if both lesson is success then it's success
Example on cell D3 (blank cell on row for student name "Bob") should be fail (his math is fail), same with cell D9 (blank cell on row for student name "jake", due to his biology is fail), but on cell D6 (blank cell on row for student name "jane") should be success.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I am trying to sum 3 non-adjacent cells. Some cells are blank, not always in the same row / column, and all are the result of vlookups. I tried: E = I+M+Q, but the result is #value!
-In column E (respectively F, G, H) that's where I want the result of the sum
-In column I (respectively, J, K, L), depending on the row, some cells are blank and some cells contain a number. That's the first term of my sum.
-In column M (respectively N, O, P), I have also blank and non-blank cells, depending on the row. This is the second term of my sum.
-In column Q (respectively R, S, T), also blank or non-blank cells. This is the third term of my sum.
I will need to extend this formula to F=J+N+R, G=K+O+S, H=L+P+T, and probably also a sum with 4 terms where E=I+M+Q+U etc.
Is there a way to use the COUNTA function in cell A1, that will return the total number of cells containing text in the rest of row 1, BUT, will start the count over after a blank cell.
EXAMPLE: A2, A3, A4 all have text added on a daily basis. The value returned via COUNTA in A1 = 3 (after the third day). However, A5 is blank, then A6 gets text on the 5th day, and now I need the returned value in A1 via the COUNTA function to = 1, because we started over after a blank cell.
Possible?
How can i return a blank cell if the formula is looking at a blank cell with IF function?
E.g. IF(A1=" "," "," ")
(This is part of a bigger statement which returns a date if and when there is a date in the cell, if there isn't it comes up with an answer even though it should be blank)
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
I want to write some VBA code that simulates the double click of the square in the lower right of a selected cell. When you double click it, it fills every cell in column A until the first blank in column B. I was able to find this code searching around:
Code:
Selection.AutoFill Destination:=Range("A10:A" & Range("B10" & Rows.Count).End(xlUp).Row)
Selection.Copy
The issue with the above is that it copies the data all the way down to the LAST row in column B with data.
I want to have the macro stop when it finds the FIRST blank cell in column B.
Just as an example, the last row of data in column B is 100, but in row 67 the cell is blank, so I want it to stop at row 66.
I'm trying to use a lookup function that when encounters a blank cell, it uses a 0 to factor into an equation. In the lookups, like d9, if there is a blank cell, I would like it to use a 0 factored in. I keep getting #N/A.
Here is my formula:....
I have a formula (below) where I want it to count the cells that contain a date that is less than or equal to today, but only when the adjacent cell is blank. The latter part of the formula works, but I'm struggling to tell it to only do the count when cells in column I are blank;
=IF('QS12'!I10:I3120="",COUNTIF('QS12'!H10:H3120,">="&TODAY()))
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View Relatedusing a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I tried to answer a problem on here by giving this formula: = COUNTIF(A1:B6,"=""")
but it doesn't work on my machine. Nor does =COUNTIF(A1:B6,"<>"""). In either case, the effect is as if all cells in the range are non-blank. But the result of =A1="" is "TRUE". Neither syntax is rejected by Excel; in fact, if you omit one of the quotes, the syntax is corrected to the form shown. So I am curious. Does this work normally, but some setting in my machine is stopping it? Or, if it never works, why is it not giving a syntax error? I am using Excel 2000.
For example if I were to take the data in cells d3($358), d4($321), d5($130), d6($82) and skip a cell to now make the same data into cells d3, d5, d7, d9. Next, the data in cells f3, f4, f5, f6 would be merge into the blank cells of d4, d6, d8, d10.
The final result would look like column B. I have over two years of sales data in two separate columns that I need to merged into one column. Is there easier way without a simple cut and paste one cell at a time as this would take an enormous amount of time to complete? I’m not that good with VBA codes so a formula works good, but if VBA is the way to go then tell how to enter it on my worksheet.