I am in need of a Macro that will take the time entered into cell E12 and have a macro automattically run and round that time to the nearest 1/4 hour and show it in cell E12 and replace the entered value..
View 9 RepliesI have a spreadsheet which has a daily schedule. It goes from 8am to 9pm in 15 minute slots.
I am looking to do a Time Bar. Using Conditional Formatting I was wanting to know if the time now can be rounded up or down in any way
Example, As I write this the time is 15:37 I have this in a cell F4
In row8 Cells C to BC I have the time in 15min slots like 08:00 08:15 08:30 and so on. What I was thinking was could I round the time from 15:37 down to 15:30 so I can use a Conditional Format to trak the time in my schedule?
Or is there an alternate way?
How can i rounddown time in VBA
I got a variable value EX: 00:30:08/// 0h:30m:08 second.
How can i round it down to the nearest EX: 00:30m:00
Narurally, the variable as not always the same value.
I am trying to figure out the written formula for needing this answer:
For a time clock with 6 minute rounding.
If I type in 8:20 as the arrival time, I need it to round to 8:18, so that the final time will be in tenths.
Here is the rounding:
Actual Rounded Minutes in Time Clock
:57, :58, :59, :00, :01, :02
:03, :04, :05, :06, :07, :08
:09, :10, :11, :12, :13, :14
:15, :16, :17, :18, :19, :20
:21, :22, :23, :24, :25, :26
:27, :28, :29, :30, :31, :32
:33, :34, :35, :36, :37, :38
:39, :40, :41, :42, :43, :44
:45, :46, :47, :48, :49, :50
:51, :52, :53, :54, :55, :56
Anything in the same line will round to the bolded time.
Example: I arrive to work at 8:09 and go to lunch at 11:59, it will round to 8:12 and 12:00, making my time worked 3:48 or 3.80. Then I get back from lunch at 12:59 and leave at 17:14, which will round to 13:00 and 17:12, making my time worked 4:12 or 4.2 for the 2nd 1/2 of the day and 8:00 or 8.0 hours for the day.
Time In----------Time Out----------Total Time----------Decimal Time----------Total Hours
...8:12.................12:00..................3:48......................3.80
..13:00................17:12..................4:12......................4.20..........................8.00
The problem is I want to write the actual time and not have to round everything myself and yet I need the decimal time to match what my time clock actually calculates from.
My current formula for the decimal shown above as 3.80 is this: =(HOUR(F7)*60+MINUTE(F7))/60
My current formula for the total time for the day (regular hours) is this: =IF((((E7-D7)+(I7-H7))*24)>8,8,((E7-D7)+(I7-H7))*24)
My current formula for overtime is this: =IF(((E7-D7)+(I7-H7))*24>8,((E7-D7)+(I7-H7))*24-8,0)
This is not a time clock, it is my personal copy of what my time for the week was/is, so that I can compare it to the actual time card that I have to sign off on.
What formula could I use to round up or down time values to the nearest 6 minute increment?
Example:
Time ----> Rounded To
5:02 PM --> 5:00 PM
5:03 PM --> 5:06 PM
4:18 PM --> 4:18 PM
4:19 PM --> 4:18 PM
4:20 PM --> 4:18 PM
4:21 PM --> 4:24 PM
etc.
EXCEL 2010. I have a column of negative and positive times (eg. -00:52, -03:07, 06:02) in custom hh:mm format, and would like a new column rounding these times to the nearest negative or positive hour (with just the whole hours displayed), so I need a formula that would give me (for this example) -1, -3, 6, etc.
View 9 Replies View RelatedI am trying to round similar to Banker's Rounding or Scientific Rounding but I can't find a consistent formula that works perfect with decimals.
Using three decimal places for all the samples, I can get 0.0785 to round to 0.078 but 0.1785 wants to round to 0.179 instead of staying 0.078. Or 0.0005 will round to 0 but 0.5115 wants to round to 0.511 instead of 0.512.
Here is a list of sample numbers along with desired results:
.0785 should be .078
.5115 should be .512
.5035 should be .504
.0005 should be 0
.0025 should be .002
.0194 should be .019
.0195 should be .02
.0135 should be .014
.0115 should be .012
.8115 should be .812
I cannot find a formula which gives me all of these results. Here is a list of the formulas I have tried so far (NOTE: cell A2 is the working cell in my worksheet where I enter the number to be rounded)
1) =MROUND(A2,0.001)
3) =ROUND(A2,3)
4) =IF(ISERROR(IF(MOD(MID(A2,4,1),2)=1,CEILING(A2,0.001),FLOOR(A2,0.001))),0,IF(MOD(MID(A2,4,1),2)=1,CEILING(A2,0.001),FLOO R(A2,0.001)))
5) =EVEN(A2)
6) =ROUNDUP(A2,3)
7) =ROUNDDOWN(A2,3)
This is what I have so far.
Code:
Range("L:L").Select
With Selection
Selection.NumberFormat = "General"
.Value = .Value =
.NumberFormat = "0.0"
[Code]...
The .NumberFormat = "0.0" is newly added and doesn't work.
I am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies View RelatedI am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies View RelatedI have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies View RelatedCan I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find)
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Sheet1. Range("A1").Value = "" Then
MsgBox "Cannot print until required cells have been completed!"
Cancel = True
End If
End Sub
I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time.
Every time I get the error, it highlights this line of
Sheets("Regenerate Request").Paste
This is all of the code up to where I get the error:
Sub YesRegen()
' after user has hit Yes on the RegenerateRequest macro, this posts the new request to
' the log, generates the new file and attaches it to an email
Application.Run "LogUnprotect"
Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy
'Selection.Copy
Sheets("Regenerate Request").Activate
Application.Run "RegenFormUnprotect"
Range("A40:K40").Select
Range("A40").Activate
Sheets("Regenerate Request").Paste
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I have a macro that is taking a long time, so long that I think something is wrong but I dont really have a great way to check. I want to put up a little window showing the progress either by saying "i'm on row XX" or having a progress bar.
Looks like msgbox requires action before the code continues so it is not a good thing to use if you want to get progress. My formula looks for bad values in a data file and fixed them. It takes forever. I would like to have a box there that simply tells me what row it is working on.
Clearly I dont want to hit the OK button for it to continue processing. I want it to update the message box on its own and then take away the message box when it is finished processing.
I have to run quite a few excel VB macro every morning one after the other.
I have to manually go thru each of them.
I need to create 1 VB macro which will run all macro after 1 min of interval in between.
Example:
Macro to run Sub Store1
Wait 1 min and then run Macro for Store2.
Macro to run Sub Store2
Wait 1 min and then run Macro for Store3.
Macro to run Sub Store3 and so on.
Below is the code I started with but not successful.
[Code] .....
What is the code to round up a range of numbers at certain decimal.
View 14 Replies View RelatedI have a sheet that i use for doing quotes for sound systems. i have a qty and price column that i input and then a column which gives me the overall total. ie qty 2 x unit amount 160.00 = 320.00 i also have a discount column that i use and a column that gives them the final price after discounts. so i will put 22% into my discount column and get 249.60 as my final price for the 2 items after the discount.
what i am wanting to do is "round up or down to the nearest 5.00 mark. so for instance, the final price in this case would be 250.00 is this possible?
I have a worksheet (Sheet1) that gets information from other sheets (1)
So in cell D7 I have the function ='1'!K33
K33 is from the Sheet labeled (1) obviously. Now the problem I am having is if the number 20.6, it automatically rounds up to 21. I need to number to round down to 20 regardless if its 20.1, or 20.9.
Since I already have a formula in D7, how do I still get the information from the other sheet but have the number round down for me. Is it possible?
Am currently calculating the total number of cartons used for different items with this formula:
=SUM(F99/352)+(H99/135)+(J99/110)+(L99/60)+(N99/28)
The divisors are the number of items in a carton.
Would like to round up each of the 5 subtotals in the above formula to the next full number, so that the total will be the sum of full numbers.
What would be the correct formula?
Cell "CostPerEvent" has the value .298896, and when I run the following statement I expect that A2 will contain the same value .298896, yet it is entered into the cell as .3
Cells(1, 2).Value = Range("CostPerEvent").Value
Is there some kind of implicit rounding going on? I rewrote the code to:
Cells(1, 2).Value = CDbl(Range("CostPerEvent").Value)
But I am curious whether this behavior is documented...
I have written a macro which includes a number of calculations. This has resulted in a value with a number of decimal places. I want this value rounded to 1 decimal place and this value written to a cell. How can i round this value correctly.
View 4 Replies View RelatedHow can I make excel display 321.165 as 321.16 when I have the cell format set to number and 2 decimal places instead of rounding it up to 321.17?
View 11 Replies View Relatedcustom number format.
The numbers in the worksheet read like this: 114'31.5
The number behind the hyphen are not to exceed 32, after 32 they become a full point (115'00.0).
I have been trying for ages to get a formula where any number prefixing .5 automatically rounds up and not down as the excel standard does.
16.4999999 does show with no decimal places as 16.
16.5 does show with no decimal place as 16. But I want it to round up to 17.
and obviously 16.50000001 does indeed round to 17 anyway.
Its purley numbers that have .5 I need to go up and not down.
In one cell i have £92.00 to 2 decimal places. If i increase that to 4 decimal places it is £91.9998. I need this £92.00 to show as £91.99 (only as 2 decimal places not 4)but when i go back to 2 decimal places it shows as £92.00 again.
View 2 Replies View Relatedlooking for for some help on a fairly simple problem: i've attached a worksheet, and in column B (Due to Supply Chain) i'd like to insert a formula that will subtract 21 days from the date in column Z (Pub Date), and then round that date to the nearest wednesday. is this possible?
fyi: the dates in column Z are in a yyyy-mm-dd format; they don't have to remain that way.
I have a section of code that build a single sheet workbook that incudes names and phone numbers to upload in to a web site.
The numbers are in internation format eg 4412345678987
The code works fine but when it saves as a CSV Delimited it round the numbers up so they end up 4412346000000.
I need a formula showing that if a number is less than say 1.25 then it rounds down to 1.0 and if its between 1.25 and 1.75 then it rounds to 1.5 and then if greater than 1.75 then it rounds up to 2. I need it to work for all numbers not just 1.
View 10 Replies View Related