I am trying to make changes to the Y column where the calculation now looks at column C to see what is entered in that column. If it is "Futures" then it runs the existing formulas but if it equals "Forex" I want it to use the value in column D as the multiplier, where the Futures option uses the hlookup to get the correct multiplier from the Variables sheet. If column C is either "Options" or "Stock_ETF" then i want to just subtract column I from column Y times column P.
I attempted to add additional IF AND functions but got the error message "Too many arguments", so now i am not sure where to go from here.
I'm getting the error that tells me I have more than 30 arguments when trying to get an average of cells across a row. The biggest issue is that I don't want to average all the cells in the row, just some of them.
I tried writing an IF statement for it and failed. What I want is every fourth cell to be totaled into the average. Another way to look at it is that I want every cell under the heading "south" to be totaled into the average.
I am trying to get two different arguments to work into one cell. I was using the "If" statement eg. if the value of B1 is greater than B2 then use the value in cell A1 else use A2. I also need in the same cell if the value of C1 = B then use the value in D1
What I am looking for is a statement which will decide which statement to use eg if B1 is blank then use the second statement else use the first statement.
It appears that the excel IF statement caps out at eight arguments. Is there a work around for this? I need to enter 29 arguments... Does excel have a CASE or Array function?
I've heard of calling a sub with arguments but don't believe I'd done it in the past. I want to remove the empty rows in 3 worksheets so that my row count actually stops where the existing data does. The second sub is where that takes place. What is the best way to call the sub to execute on the three sheets?
My thinking had been that if I used the argument ws as worksheet I could simply call the sub with the worksheet name as the argument.
Code: Option Explicit Sub PopulateProfit()
Dim wb As ThisWorkbook 'Dim ws As Worksheet Dim wsProfRep As Worksheet Dim wsChaseRaw As Worksheet
I've created a spreadsheet that calculates both the SUM and the AVERAGE on 2 different rows. So far, so good. The problem I've come across is that there are 35 different numbers (arguments?) that have to be calculated and from what I see, Excel has a limit of 30.
Is there a way for me to get around this? If it'll help, I can send the spreadsheet to you so you can see what I'm talking about in the event I didn't properly explain it here.
The 2 basic arguments of the Countif Function (range and criteria) are simple and make sense. However, I've observed instances where the criteria component is in fact a range.
In this case, is what is the syntax instructing the app to count in the first range?
The following is a medical reference equation. I have gender in column B, height in column G and age in column I. There are three age ranges: child, adolescent and adult. These are the individual equations: ...
i have 18 arguements that i want to enter using the "if" formula. however, after entering the data i get a message stating that i have too many arguments.
here is the data that i'm trying to enter: ALLOYDENSITY A200.291 22050.285 254SMO0.284 A2000.321 A4000.319 A6000.304 A6250.303 A800HT0.287 A8250.294 C2760.323 C220.290 A2860.289 I7180.296
i start the formula as follows: =IF(B7=20,".291",IF(B7=2205,".285",IF(B7=254,".284",............. i drop the letters from column "b" because i stopped getting error messages when i took them out.
I have to use this exact same formula as a SUM function as well, but am having the same problem. Neither SUM or COUNT will take all the arguments.
I've attached the file. The tabs in red are the worksheets that won't accept the formula. The green tabs worked fine (they all had less cells to include than the sheets in red.)
I’m using a SUMIF function to evaulate some date. The second argument in the function, the criteria, is that the numbers to be summed are greater than 25 but less than 50.
Im trying to build a little database and the closest thing i have come to manage what i want to do is with IF and Vlookup function.
I have 1 "main page" lets call it "sheet1" Then i have nomerous of "secondary pages" we call them "sheet2", "sheet3" etc.
The idea is that on my "main page" im using 3 colums "A","B" and "C". "A" and "B" helps deciding where my VLOOKUP function should find the correct value.
The "A" column is planned to decide in what sheet to look for seach word(which is written in "C" column)
Basicly if "A1" is saying "2" its gonna do my VLOOKUP in "sheet2" , and if "A1" sais "3" its gonna look for my "search word" in "sheet3" etc.
My formula at this point (witch is working for 2 pages) =IF(A1=2;VLOOKUP(B1;sheet1!A1:B6;2;FALSE);IF(A1=3;VLOOKUP(B1;sheet2!A1:B6;2;FALSE)))
This is working perfectly. If i write "2" in "A1" and "car" in "B1" VLOOKUP jumps to "sheet1" lookup "car" and return the value in the second column (in this case 2" and if i write "3" in "A1" and keep "car" in "B1" VLOOKUP jumps to "sheet2" and return the carvalue for this sheet (in this case 22).
Then the problem The problem is ofcourse that if i wanna continue with this formula in the same box, i wanna make it keep looking in more sheets depending on what number i have in "A1" If i put number 5 in it goes to "sheet5" and look for "car" and return valuve.
But at this point the formula is too big for excel.
So i guess my question is. Is there any workaround for this? Can anyone come up how to approach this in another way? (im out of ideas) Or am i doomed and have to learn programming to get my idea to work?
I'm trying to understand the consequences of conditional arguments for the function SUMPRODUCT(). For example, this function was kindly provided by SGH:
My question is about passing arguments to UserForm procedures. I've created a Main procedure. Main calls a sub procedure and returns an array. Obviously Main can now use the array. But then Main calls a sub procedure to open my userform.
All of my userform sub procedures need to use the array I created in Main. Do I have to pass the array into all of my userform procedures? Into the UserForm_Show procedure? And then again into UserForm_Initialize? And then again into ComboBox_Change? I don't understand how to give my UserForm procedures the array from my Main procedure.
I'm using the following at the top of the declarations in the module, but without going into the VBE and manually changing the False to True, is there a way to do this programmatically?
I have a misc worksheet where I can store True and False, but how can I link it to the code.
I'm trying to use multiple arguments for a date, but they are not going through for some reason
the two I'm using are: =IF(month(a1)=month(today())+3,"yes","") =IF(year(a1)=year(today()),"yes","") each one is fine on its own, but if I try to put them together using "and" it does not work.
I am trying to have the word yes show up when we are three months away (not 90 days), but also I want it to show only this years results and not next years.
I am have these values based on dates from 1st till 31st and each value is in the alternate cell on the worksheet. For example, value for the 1st is in Cell A1 and the value for 2nd is in cell C1 and so on.
I need to sum all these values for different dates. I am using the sum() and it gives me an error like "too many arguments in the formula".
Do I need to do something else or apply a different formula? Maybe a UDF or a macro?
"You've entered too many arguments for this function" Logically I can follow this message but I was under the impression that you could get a maximum of 64 arguments in an "IF" condition.
The actual value of Cell P34 is DKK1938.22 so I expect it to return £203.68 in cell Q34.
V = 100 x [E /(IY + YP)] x Sqr. [((R + G)/2 / (IY + YP + F)] V = 100 x [6.10 /(5.60)] x Sqr. [((10.2+2)/2 / (5.60 + 2.1] V = 108.93 x Sqr (.79) V = $96.89 / share as of 7/18/2014
E = Earnings in $ / share 6.1 (b9) IY = Interest rate in % 5.6 (b10) R = Profitability Factor in % (internal growth rate)10.2 (b11) G = Earnings Growth in % / yr. 2 (b12) F = Inflation Rate in % / yr. 2.1 (b13)
Here's what I have, result should be $96.89, I need to tell excel to take square root of everything to the right not just (B11+ B12)
I have a ('start:end') function that's not working. A simplified example is shown below in the screen shots.
I want a given cell in sheet1 to produce the sum of factors within a given column/row arrangements and equations from sheet3 and sheet4.
I've tried all the arguments I can think of in their proper places including the ' arguments before and after start:end but nothing seems to work. My resulting answer is usually #REF!
